Our top 10, at a glance.

Choose a physical vise for a hobby workshop by matching workpiece size, jaw surfaces, positioning and bench or tabletop mounting.

  1. #1Yost LV-4 Homeowners ViseBest for general home-workshop assembly
  2. #2Wilton WS4 Shop ViseBest for four-point bench mounting for general shop tasks
  3. #3BESSEY Heavy Duty Bench ViseBest for a compact bolted vise with two base locks
  4. #4BESSEY Multi-Purpose Rotating ViseBest for rotating jaw access for pipe and bench work
  5. #5Olympia Tools 4-Inch Bench ViseBest for a homeowner vise with an anvil horn
  6. #6IRWIN Clamp-On ViseBest for removable workholding on a table edge
  7. #7PanaVise Standard ViseBest for small hobby parts with adjustable working angles
  8. #8BESSEY Vacuum Base ViseBest for temporary mounting on a nonporous surface
  9. #9Shop Fox Quick-Release Wood ViseBest for frequent size changes in woodworking
  10. #10BESSEY Light Duty Wood ViseBest for light woodworking with custom wooden facings

All 10 picks, in order.

  1. #1

    Best for general home-workshop assembly

    Yost LV-4 Homeowners Vise

    General home-workshop assembly.

    Why it fits

    • Yost describes LV-4 for woodworking, assembly and general maintenance, with a locking base that swivels 240 degrees. It has 4½ inch wide jaws, a 3 inch jaw opening and a 2.6 inch throat depth. The vise has replaceable hardened-steel serrated jaw faces and holds pipes or tubes from 0.6 to 1.85 inches in diameter. [1] [2] [3]

    Before you choose

    • A 4½ inch jaw width does not provide a 4½ inch opening: the documented opening is 3 inches. Serrated faces also need appropriate covers for finished surfaces. [1] [2] [3]

    Check before buying:

    • The retained product page does not specify the mounting-hole pattern, included mounting hardware, rated holding force or the exact replacement-jaw part number.

    Model: Yost LV-4 Homeowners Vise · LV-4, SKU 56487 · US

    Check current details at Yost ↗

  2. #2

    Best for four-point bench mounting for general shop tasks

    Wilton WS4 Shop Vise

    Four-point bench mounting for general shop tasks.

    Why it fits

    • The Wilton WS4 specification sheet identifies general-duty use, a 360-degree swivel base and two lockdowns. The retained WS4 specification sheet lists 4 inch wide jaws, a 4 inch maximum opening, a 2¾ inch throat depth and four mounting points. The selected sheet lists replaceable serrated top jaws, built-in pipe jaws and an anvil work surface. [4] [5] [6]

    Before you choose

    • Four mounting points require a suitable bench and matching hardware. The sheet confirms pipe jaws but does not state a numeric pipe capacity. [4] [5] [6]

    Check before buying:

    • The maker sheet describes gray cast iron and a 2¾ inch throat, while the Lowe’s listing describes ductile iron and a 2.075 inch throat. Current supplied material and throat depth remain unresolved; confirm the exact revision before buying. We do not rank by differing strength labels. Mounting-hole spacing and exact jaw-replacement part number remain unresolved.

    Model: Wilton WS4 Shop Vise · WS4, stock 63300 · US

    Check current details at Wilton ↗

  3. #3

    Best for a compact bolted vise with two base locks

    BESSEY Heavy Duty Bench Vise

    A compact bolted vise with two base locks.

    Why it fits

    • BESSEY describes BV-HD40 as a bench-top bolted vise with a 360-degree swivel base, three mounting holes and two lockdowns. The selected model has 4 inch wide jaws, a 4 inch opening and a 2 inch throat depth; its brochure gives an approximate 13 pound weight. The brochure identifies a ductile-iron body, serrated jaws and an integrated anvil for this bench-vise design. [7] [8] [9]

    Before you choose

    • Its brochure lists a 2 inch throat, compared with 2¾ inches for BV-MPV5; WS4’s current throat depth needs confirmation because sources conflict. Allow for the mounting footprint, not just the jaw width. [7] [8] [9]

    Check before buying:

    • Mounting-hole spacing, pipe capacity, rated holding force and the exact replacement-jaw kit are not established by the retained brochure. The maker-hosted brochure is marked 03.20; confirm the current supplied model.

    Model: BESSEY Heavy Duty Bench Vise · BV-HD40 · US

    Check current details at BESSEY ↗

  4. #4

    Best for rotating jaw access for pipe and bench work

    BESSEY Multi-Purpose Rotating Vise

    Rotating jaw access for pipe and bench work.

    Why it fits

    • BESSEY describes BV-MPV5 as a rotating pipe-and-bench vise with jaws that rotate 360 degrees and a built-in anvil. It has 5 inch wide jaws, a 5 inch opening, a 2¾ inch throat depth and an approximate 29 pound weight. The brochure specifies a 2 inch pipe capacity, a ductile-iron body, three bench mounting holes and two base lockdowns. [10] [11] [12]

    Before you choose

    • At approximately 29 pounds, this is a more substantial installation than the smaller bench models. Base-swivel range needs confirmation: the brochure says 270 degrees in its overview and 360 degrees in the product description. [10] [11] [12]

    Check before buying:

    • Rated holding force, mounting-hole spacing and replacement-jaw details are unresolved. The 360-degree jaw rotation is distinct from the conflicting base-swivel descriptions. The retained brochure is marked 03.20.

    Model: BESSEY Multi-Purpose Rotating Vise · BV-MPV5 · US

    Check current details at BESSEY ↗

  5. #5

    Best for a homeowner vise with an anvil horn

    Olympia Tools 4-Inch Bench Vise

    A homeowner vise with an anvil horn.

    Why it fits

    • Olympia describes 38-604 as a homeowner bench vise with a polished anvil and an anvil horn for shaping. It has a 4 inch jaw width, a four-lug base and a base that swivels 270 degrees with a lock lever. The maker lists replaceable hardened-steel jaw faces, permanent pipe jaws and a spindle guard against dirt and chips. [13] [14] [15]

    Before you choose

    • The 4 inch headline is jaw width; the retained page does not state jaw opening or throat depth. Confirm those capacities before choosing it for a specific workpiece. [13] [14] [15]

    Check before buying:

    • Numeric pipe capacity, mounting-hole spacing, included hardware, replacement-jaw part number and rated holding force are unspecified. The maker says appearances and packaging may change as its catalog is revised.

    Model: Olympia Tools 4-Inch Bench Vise · 38-604 · US

    Check current details at Olympia Tools ↗

  6. #6

    Best for removable workholding on a table edge

    IRWIN Clamp-On Vise

    Removable workholding on a table edge.

    Why it fits

    • IRWIN describes 226303ZR as a portable vise for general-purpose and light-duty work, with an anvil shaping horn. The clamp-on mount accepts tables up to 2 inches thick. The maker describes its pipe jaws as having a 2 inch capacity. [16] [17] [18]

    Before you choose

    • The table-thickness limit and pipe-jaw capacity are separate specifications. Check edge shape and underside clearance as well as thickness before installing. [16] [17] [18]

    Check before buying:

    • Jaw width, flat-jaw opening, throat depth, swivel range, replaceable-jaw details and rated holding force are not specified by the retained maker page. No heavy-impact capacity is inferred.

    Model: IRWIN Clamp-On Vise · 226303ZR · US

    Check current details at IRWIN ↗

  7. #7

    Best for small hobby parts with adjustable working angles

    PanaVise Standard Vise

    Small hobby parts with adjustable working angles.

    Why it fits

    • PanaVise describes Model 301 for hobbies, electronics and small home repairs; one knob controls 90-degree tilt, 360-degree turn and 360-degree rotation. Its nylon jaws are 2½ inches wide and ½ inch tall, with a 2¼ inch opening. The base has a 4.3125 inch bolt circle for three ¼ inch flat-head screws, not included; the maker catalog identifies interchangeable jaws. [19] [20] [21]

    Before you choose

    • The small nylon-jaw design is a specialized hobby holder. Its documented size and materials do not establish the capacity of an iron mechanics vise. A weighted or clamp base mount is an additional accessory, not assumed in Model 301. [19] [20] [21]

    Check before buying:

    • Throat depth and rated holding force are not established. The maker catalog gives nylon-jaw heat limits of 200°F continuous and 300°F intermittent; those are material limits, not permission to direct flame at the jaws. Exact current replacement-jaw selection should be checked.

    Model: PanaVise Standard Vise · 301, Standard Base with standard head · US

    Check current details at PanaVise ↗

  8. #8

    Best for temporary mounting on a nonporous surface

    BESSEY Vacuum Base Vise

    Temporary mounting on a nonporous surface.

    Why it fits

    • BESSEY describes BV-VB as a portable hobbyist vise that rotates and swivels after releasing its locking ring. The brochure gives a 2¾ inch jaw width and opening, plus an approximate 4½ pound weight. Its vacuum mount requires a nonporous surface, and it comes with rubber jaw pads. [22] [23] [24]

    Before you choose

    • A vacuum base requires a suitable nonporous surface; the brochure does not establish attachment to an unfinished porous wooden bench. Verify attachment before work. [22] [23] [24]

    Check before buying:

    • Throat depth, rated holding force, continuous attachment duration and exact replacement-pad or jaw part numbers are not specified. The retained brochure is marked 03.20.

    Model: BESSEY Vacuum Base Vise · BV-VB · US

    Check current details at BESSEY ↗

  9. #9

    Best for frequent size changes in woodworking

    Shop Fox Quick-Release Wood Vise

    Frequent size changes in woodworking.

    Why it fits

    • Shop Fox’s D4327 instructions describe a quick-release lever that disengages the leadscrew so the sliding jaw can move freely, plus an adjustable bench dog. D4327 has a 7 inch jaw width, an 8 inch maximum opening and a 21 pound listed weight. The vise is designed for benches at least 2¼ inches thick, adaptable down to 1½ inches with a shim; holes accept separately supplied or shop-made wooden jaw pads. [25] [26] [27]

    Before you choose

    • Installation needs preparation at the bench front and underside, including any required shim and jaw pads. This is a woodworking face-vise arrangement rather than a portable swivel-base mechanics vise. [25] [26] [27]

    Check before buying:

    • Throat depth and rated holding force are not specified. Wood jaw pads are not included; confirm current model and installation hardware. The manual covers models manufactured since December 2017.

    Model: Shop Fox Quick-Release Wood Vise · D4327, 7 inch jaw · US

    Check current details at Shop Fox ↗

  10. #10

    Best for light woodworking with custom wooden facings

    BESSEY Light Duty Wood Vise

    Light woodworking with custom wooden facings.

    Why it fits

    • BESSEY identifies BV-WV65 as a light-duty wood vise for home or work. The brochure lists a 6 inch jaw width, a 6 inch opening, a 2⅝ inch throat depth and an approximate 8½ pound weight. Its cast-iron body has jaws pre-drilled for attaching wooden facings. [28] [29] [30]

    Before you choose

    • Select and fit suitable wooden facings for the workpiece. The light-duty description should not be treated as a documented heavy-impact or metal-fabrication rating. [28] [29] [30]

    Check before buying:

    • The brochure does not establish a swivel base, quick-release mechanism, mounting pattern, supplied wooden facings or rated holding force. Confirm the installation instructions and current revision of this model; the retained brochure is marked 03.20.

    Model: BESSEY Light Duty Wood Vise · BV-WV65 · US

    Check current details at BESSEY ↗

The details, side by side.

Published specifications and features
What matters#1Yost LV-4 Homeowners Vise#2Wilton WS4 Shop Vise#3BESSEY Heavy Duty Bench Vise#4BESSEY Multi-Purpose Rotating Vise#5Olympia Tools 4-Inch Bench Vise#6IRWIN Clamp-On Vise#7PanaVise Standard Vise#8BESSEY Vacuum Base Vise#9Shop Fox Quick-Release Wood Vise#10BESSEY Light Duty Wood Vise
WorkflowYost describes LV-4 for woodworking, assembly and general maintenance, with a locking base that swivels 240 degrees. [1]The Wilton WS4 specification sheet identifies general-duty use, a 360-degree swivel base and two lockdowns. [4]BESSEY describes BV-HD40 as a bench-top bolted vise with a 360-degree swivel base, three mounting holes and two lockdowns. [7]BESSEY describes BV-MPV5 as a rotating pipe-and-bench vise with jaws that rotate 360 degrees and a built-in anvil. [10]Olympia describes 38-604 as a homeowner bench vise with a polished anvil and an anvil horn for shaping. [13]IRWIN describes 226303ZR as a portable vise for general-purpose and light-duty work, with an anvil shaping horn. [16]PanaVise describes Model 301 for hobbies, electronics and small home repairs; one knob controls 90-degree tilt, 360-degree turn and 360-degree rotation. [19]BESSEY describes BV-VB as a portable hobbyist vise that rotates and swivels after releasing its locking ring. [22]Shop Fox’s D4327 instructions describe a quick-release lever that disengages the leadscrew so the sliding jaw can move freely, plus an adjustable bench dog. [25]BESSEY identifies BV-WV65 as a light-duty wood vise for home or work. [28]
Form factorIt has 4½ inch wide jaws, a 3 inch jaw opening and a 2.6 inch throat depth. [2]The retained WS4 specification sheet lists 4 inch wide jaws, a 4 inch maximum opening, a 2¾ inch throat depth and four mounting points. [5]The selected model has 4 inch wide jaws, a 4 inch opening and a 2 inch throat depth; its brochure gives an approximate 13 pound weight. [8]It has 5 inch wide jaws, a 5 inch opening, a 2¾ inch throat depth and an approximate 29 pound weight. [11]It has a 4 inch jaw width, a four-lug base and a base that swivels 270 degrees with a lock lever. [14]The clamp-on mount accepts tables up to 2 inches thick. [17]Its nylon jaws are 2½ inches wide and ½ inch tall, with a 2¼ inch opening. [20]The brochure gives a 2¾ inch jaw width and opening, plus an approximate 4½ pound weight. [23]D4327 has a 7 inch jaw width, an 8 inch maximum opening and a 21 pound listed weight. [26]The brochure lists a 6 inch jaw width, a 6 inch opening, a 2⅝ inch throat depth and an approximate 8½ pound weight. [29]
CompatibilityThe vise has replaceable hardened-steel serrated jaw faces and holds pipes or tubes from 0.6 to 1.85 inches in diameter. [3]The selected sheet lists replaceable serrated top jaws, built-in pipe jaws and an anvil work surface. [6]The brochure identifies a ductile-iron body, serrated jaws and an integrated anvil for this bench-vise design. [9]The brochure specifies a 2 inch pipe capacity, a ductile-iron body, three bench mounting holes and two base lockdowns. [12]The maker lists replaceable hardened-steel jaw faces, permanent pipe jaws and a spindle guard against dirt and chips. [15]The maker describes its pipe jaws as having a 2 inch capacity. [18]The base has a 4.3125 inch bolt circle for three ¼ inch flat-head screws, not included; the maker catalog identifies interchangeable jaws. [21]Its vacuum mount requires a nonporous surface, and it comes with rubber jaw pads. [24]The vise is designed for benches at least 2¼ inches thick, adaptable down to 1½ inches with a shim; holes accept separately supplied or shop-made wooden jaw pads. [27]Its cast-iron body has jaws pre-drilled for attaching wooden facings. [30]

Measure the workpiece in three directions

LV-4 has 4½ inch wide jaws but only a 3 inch opening. The retained WS4 sheet lists a 4 inch opening and 2¾ inch throat, but its current throat depth needs confirmation because Lowe’s lists 2.075 inches. BV-HD40’s brochure lists a 2 inch throat. Jaw width describes contact span, opening describes separation, and throat depth describes clearance below the jaws. Match all three to the way you intend to orient the part; pipe-jaw capacity is a separate limit. [2] [3] [5] [8]

Choose the mount before the biggest jaws

WS4 lists four mounting points and BV-HD40 lists three. IRWIN’s removable clamp accepts a table up to 2 inches thick. BESSEY’s vacuum model requires a nonporous surface. D4327 is installed at the front and underside of a woodworking bench and may need a shim. Check the exact hole pattern, hardware, underside clearance and bench construction; a large jaw specification does not establish a suitable mounting surface. [5] [7] [17] [24] [27]

Match jaw surfaces and positioning to the job

LV-4’s replaceable serrated steel faces, PanaVise 301’s nylon jaws and BV-WV65’s provision for wooden facings serve different workpieces. Choose suitable covers or facings when the finish matters and confirm the exact replacement part. BV-MPV5’s rotating jaws are useful when you need access at another angle, but its brochure conflicts on base-swivel range; jaw rotation does not resolve that discrepancy. No comparative grip or surface-damage tests are claimed here. [3] [20] [30] [10]

How we compared.

Source-based comparison of actual maker pages, specification sheets and manuals read October 2, 2026. Ten distinct models cover bolted shop vises, rotating jaws, removable clamp and vacuum mounts, a small precision vise and wood face vises; size variants of one design are excluded. General bench work comes first, followed by specialized mounting and woodworking tasks. The BESSEY brochure is marked 03.20 and the Shop Fox instructions cover models manufactured since December 2017; reading them now does not establish current stock or every revision change. Wilton and PanaVise manufacturer documents are hosted by distributors. Newark’s current 301 listing corroborates its identity and jaw dimensions. One maker-hosted Yost owner comment, by Charley1140, describes LV-4 as useful for small projects; that is one anecdote, not owner consensus or our test. We have not measured clamping force, holding strength, jaw parallelism or durability. Casting tensile-strength labels are not treated as workholding-force ratings. Jaw width, opening, throat depth, pipe capacity and table-clamp capacity are separate measurements. Unknown specifications and conflicting descriptions stay explicit. Follow the exact model’s installation and operating instructions and use jaw surfaces appropriate for the workpiece finish.

How we choose

Sources

Official product documentation, reviewed October 2, 2026.

Wilton WS4 Shop Vise documented specifications ↗

Wilton · US · Read October 2, 2026

Olympia Tools 4-Inch Bench Vise documented specifications ↗

Olympia Tools · US · Read October 2, 2026

IRWIN Clamp-On Vise documented specifications ↗

IRWIN · US · Read October 2, 2026

PanaVise Standard Vise documented specifications ↗

PanaVise · US · Read October 2, 2026

BESSEY Vacuum Base Vise documented specifications ↗

BESSEY · US · Read October 2, 2026

Individual LV-4 owner comment ↗

Charley1140, hosted by Yost · US · Read October 2, 2026

PanaVise 301 current identity corroboration ↗

Newark · US · Read October 2, 2026

Wilton WS4 conflicting retail specifications ↗

Lowe’s · US · Read October 2, 2026

Detailed source notes
  1. Yost LV-4 Homeowners Vise: Yost describes LV-4 for woodworking, assembly and general maintenance, with a locking base that swivels 240 degrees.

    Exact selected model; manufacturer-stated dimensions, design, mounting and project scope. No measured holding strength, clamping-force comparison, durability or universal workpiece compatibility implied.

    Yost LV-4 Homeowners Vise documented specifications · Exact model description and dimension table; BESSEY brochure pages 1–2, PanaVise catalog printed page 7, Shop Fox instructions pages 1–2 where applicable
    Yost describes LV-4 for woodworking, assembly and general maintenance, with a locking base that swivels 240 degrees.

    Checked October 2, 2026

  2. Yost LV-4 Homeowners Vise: It has 4½ inch wide jaws, a 3 inch jaw opening and a 2.6 inch throat depth.

    Exact selected model; manufacturer-stated dimensions, design, mounting and project scope. No measured holding strength, clamping-force comparison, durability or universal workpiece compatibility implied.

    Yost LV-4 Homeowners Vise documented specifications · Exact model description and dimension table; BESSEY brochure pages 1–2, PanaVise catalog printed page 7, Shop Fox instructions pages 1–2 where applicable
    It has 4½ inch wide jaws, a 3 inch jaw opening and a 2.6 inch throat depth.

    Checked October 2, 2026

  3. Yost LV-4 Homeowners Vise: The vise has replaceable hardened-steel serrated jaw faces and holds pipes or tubes from 0.6 to 1.85 inches in diameter.

    Exact selected model; manufacturer-stated dimensions, design, mounting and project scope. No measured holding strength, clamping-force comparison, durability or universal workpiece compatibility implied.

    Yost LV-4 Homeowners Vise documented specifications · Exact model description and dimension table; BESSEY brochure pages 1–2, PanaVise catalog printed page 7, Shop Fox instructions pages 1–2 where applicable
    The vise has replaceable hardened-steel serrated jaw faces and holds pipes or tubes from 0.6 to 1.85 inches in diameter.

    Checked October 2, 2026

  4. Wilton WS4 Shop Vise: The Wilton WS4 specification sheet identifies general-duty use, a 360-degree swivel base and two lockdowns.

    Exact selected model; manufacturer-stated dimensions, design, mounting and project scope. No measured holding strength, clamping-force comparison, durability or universal workpiece compatibility implied.

    Wilton WS4 Shop Vise documented specifications · Exact model description and dimension table; BESSEY brochure pages 1–2, PanaVise catalog printed page 7, Shop Fox instructions pages 1–2 where applicable
    The Wilton WS4 specification sheet identifies general-duty use, a 360-degree swivel base and two lockdowns.

    Checked October 2, 2026

  5. Wilton WS4 Shop Vise: The retained WS4 specification sheet lists 4 inch wide jaws, a 4 inch maximum opening, a 2¾ inch throat depth and four mounting points.

    Exact selected model; manufacturer-stated dimensions, design, mounting and project scope. No measured holding strength, clamping-force comparison, durability or universal workpiece compatibility implied.

    Wilton WS4 Shop Vise documented specifications · Exact model description and dimension table; BESSEY brochure pages 1–2, PanaVise catalog printed page 7, Shop Fox instructions pages 1–2 where applicable
    The retained WS4 specification sheet lists 4 inch wide jaws, a 4 inch maximum opening, a 2¾ inch throat depth and four mounting points.

    Checked October 2, 2026

  6. Wilton WS4 Shop Vise: The selected sheet lists replaceable serrated top jaws, built-in pipe jaws and an anvil work surface.

    Exact selected model; manufacturer-stated dimensions, design, mounting and project scope. No measured holding strength, clamping-force comparison, durability or universal workpiece compatibility implied.

    Wilton WS4 Shop Vise documented specifications · Exact model description and dimension table; BESSEY brochure pages 1–2, PanaVise catalog printed page 7, Shop Fox instructions pages 1–2 where applicable
    The selected sheet lists replaceable serrated top jaws, built-in pipe jaws and an anvil work surface.

    Checked October 2, 2026

  7. BESSEY Heavy Duty Bench Vise: BESSEY describes BV-HD40 as a bench-top bolted vise with a 360-degree swivel base, three mounting holes and two lockdowns.

    Exact selected model; manufacturer-stated dimensions, design, mounting and project scope. No measured holding strength, clamping-force comparison, durability or universal workpiece compatibility implied.

    BESSEY Heavy Duty Bench Vise documented specifications · Exact model description and dimension table; BESSEY brochure pages 1–2, PanaVise catalog printed page 7, Shop Fox instructions pages 1–2 where applicable
    BESSEY describes BV-HD40 as a bench-top bolted vise with a 360-degree swivel base, three mounting holes and two lockdowns.

    Checked October 2, 2026

  8. BESSEY Heavy Duty Bench Vise: The selected model has 4 inch wide jaws, a 4 inch opening and a 2 inch throat depth; its brochure gives an approximate 13 pound weight.

    Exact selected model; manufacturer-stated dimensions, design, mounting and project scope. No measured holding strength, clamping-force comparison, durability or universal workpiece compatibility implied.

    BESSEY Heavy Duty Bench Vise documented specifications · Exact model description and dimension table; BESSEY brochure pages 1–2, PanaVise catalog printed page 7, Shop Fox instructions pages 1–2 where applicable
    The selected model has 4 inch wide jaws, a 4 inch opening and a 2 inch throat depth; its brochure gives an approximate 13 pound weight.

    Checked October 2, 2026

  9. BESSEY Heavy Duty Bench Vise: The brochure identifies a ductile-iron body, serrated jaws and an integrated anvil for this bench-vise design.

    Exact selected model; manufacturer-stated dimensions, design, mounting and project scope. No measured holding strength, clamping-force comparison, durability or universal workpiece compatibility implied.

    BESSEY Heavy Duty Bench Vise documented specifications · Exact model description and dimension table; BESSEY brochure pages 1–2, PanaVise catalog printed page 7, Shop Fox instructions pages 1–2 where applicable
    The brochure identifies a ductile-iron body, serrated jaws and an integrated anvil for this bench-vise design.

    Checked October 2, 2026

  10. BESSEY Multi-Purpose Rotating Vise: BESSEY describes BV-MPV5 as a rotating pipe-and-bench vise with jaws that rotate 360 degrees and a built-in anvil.

    Exact selected model; manufacturer-stated dimensions, design, mounting and project scope. No measured holding strength, clamping-force comparison, durability or universal workpiece compatibility implied.

    BESSEY Multi-Purpose Rotating Vise documented specifications · Exact model description and dimension table; BESSEY brochure pages 1–2, PanaVise catalog printed page 7, Shop Fox instructions pages 1–2 where applicable
    BESSEY describes BV-MPV5 as a rotating pipe-and-bench vise with jaws that rotate 360 degrees and a built-in anvil.

    Checked October 2, 2026

  11. BESSEY Multi-Purpose Rotating Vise: It has 5 inch wide jaws, a 5 inch opening, a 2¾ inch throat depth and an approximate 29 pound weight.

    Exact selected model; manufacturer-stated dimensions, design, mounting and project scope. No measured holding strength, clamping-force comparison, durability or universal workpiece compatibility implied.

    BESSEY Multi-Purpose Rotating Vise documented specifications · Exact model description and dimension table; BESSEY brochure pages 1–2, PanaVise catalog printed page 7, Shop Fox instructions pages 1–2 where applicable
    It has 5 inch wide jaws, a 5 inch opening, a 2¾ inch throat depth and an approximate 29 pound weight.

    Checked October 2, 2026

  12. BESSEY Multi-Purpose Rotating Vise: The brochure specifies a 2 inch pipe capacity, a ductile-iron body, three bench mounting holes and two base lockdowns.

    Exact selected model; manufacturer-stated dimensions, design, mounting and project scope. No measured holding strength, clamping-force comparison, durability or universal workpiece compatibility implied.

    BESSEY Multi-Purpose Rotating Vise documented specifications · Exact model description and dimension table; BESSEY brochure pages 1–2, PanaVise catalog printed page 7, Shop Fox instructions pages 1–2 where applicable
    The brochure specifies a 2 inch pipe capacity, a ductile-iron body, three bench mounting holes and two base lockdowns.

    Checked October 2, 2026

  13. Olympia Tools 4-Inch Bench Vise: Olympia describes 38-604 as a homeowner bench vise with a polished anvil and an anvil horn for shaping.

    Exact selected model; manufacturer-stated dimensions, design, mounting and project scope. No measured holding strength, clamping-force comparison, durability or universal workpiece compatibility implied.

    Olympia Tools 4-Inch Bench Vise documented specifications · Exact model description and dimension table; BESSEY brochure pages 1–2, PanaVise catalog printed page 7, Shop Fox instructions pages 1–2 where applicable
    Olympia describes 38-604 as a homeowner bench vise with a polished anvil and an anvil horn for shaping.

    Checked October 2, 2026

  14. Olympia Tools 4-Inch Bench Vise: It has a 4 inch jaw width, a four-lug base and a base that swivels 270 degrees with a lock lever.

    Exact selected model; manufacturer-stated dimensions, design, mounting and project scope. No measured holding strength, clamping-force comparison, durability or universal workpiece compatibility implied.

    Olympia Tools 4-Inch Bench Vise documented specifications · Exact model description and dimension table; BESSEY brochure pages 1–2, PanaVise catalog printed page 7, Shop Fox instructions pages 1–2 where applicable
    It has a 4 inch jaw width, a four-lug base and a base that swivels 270 degrees with a lock lever.

    Checked October 2, 2026

  15. Olympia Tools 4-Inch Bench Vise: The maker lists replaceable hardened-steel jaw faces, permanent pipe jaws and a spindle guard against dirt and chips.

    Exact selected model; manufacturer-stated dimensions, design, mounting and project scope. No measured holding strength, clamping-force comparison, durability or universal workpiece compatibility implied.

    Olympia Tools 4-Inch Bench Vise documented specifications · Exact model description and dimension table; BESSEY brochure pages 1–2, PanaVise catalog printed page 7, Shop Fox instructions pages 1–2 where applicable
    The maker lists replaceable hardened-steel jaw faces, permanent pipe jaws and a spindle guard against dirt and chips.

    Checked October 2, 2026

  16. IRWIN Clamp-On Vise: IRWIN describes 226303ZR as a portable vise for general-purpose and light-duty work, with an anvil shaping horn.

    Exact selected model; manufacturer-stated dimensions, design, mounting and project scope. No measured holding strength, clamping-force comparison, durability or universal workpiece compatibility implied.

    IRWIN Clamp-On Vise documented specifications · Exact model description and dimension table; BESSEY brochure pages 1–2, PanaVise catalog printed page 7, Shop Fox instructions pages 1–2 where applicable
    IRWIN describes 226303ZR as a portable vise for general-purpose and light-duty work, with an anvil shaping horn.

    Checked October 2, 2026

  17. IRWIN Clamp-On Vise: The clamp-on mount accepts tables up to 2 inches thick.

    Exact selected model; manufacturer-stated dimensions, design, mounting and project scope. No measured holding strength, clamping-force comparison, durability or universal workpiece compatibility implied.

    IRWIN Clamp-On Vise documented specifications · Exact model description and dimension table; BESSEY brochure pages 1–2, PanaVise catalog printed page 7, Shop Fox instructions pages 1–2 where applicable
    The clamp-on mount accepts tables up to 2 inches thick.

    Checked October 2, 2026

  18. IRWIN Clamp-On Vise: The maker describes its pipe jaws as having a 2 inch capacity.

    Exact selected model; manufacturer-stated dimensions, design, mounting and project scope. No measured holding strength, clamping-force comparison, durability or universal workpiece compatibility implied.

    IRWIN Clamp-On Vise documented specifications · Exact model description and dimension table; BESSEY brochure pages 1–2, PanaVise catalog printed page 7, Shop Fox instructions pages 1–2 where applicable
    The maker describes its pipe jaws as having a 2 inch capacity.

    Checked October 2, 2026

  19. PanaVise Standard Vise: PanaVise describes Model 301 for hobbies, electronics and small home repairs; one knob controls 90-degree tilt, 360-degree turn and 360-degree rotation.

    Exact selected model; manufacturer-stated dimensions, design, mounting and project scope. No measured holding strength, clamping-force comparison, durability or universal workpiece compatibility implied.

    PanaVise Standard Vise documented specifications · Exact model description and dimension table; BESSEY brochure pages 1–2, PanaVise catalog printed page 7, Shop Fox instructions pages 1–2 where applicable
    PanaVise describes Model 301 for hobbies, electronics and small home repairs; one knob controls 90-degree tilt, 360-degree turn and 360-degree rotation.

    Checked October 2, 2026

  20. PanaVise Standard Vise: Its nylon jaws are 2½ inches wide and ½ inch tall, with a 2¼ inch opening.

    Exact selected model; manufacturer-stated dimensions, design, mounting and project scope. No measured holding strength, clamping-force comparison, durability or universal workpiece compatibility implied.

    PanaVise Standard Vise documented specifications · Exact model description and dimension table; BESSEY brochure pages 1–2, PanaVise catalog printed page 7, Shop Fox instructions pages 1–2 where applicable
    Its nylon jaws are 2½ inches wide and ½ inch tall, with a 2¼ inch opening.

    Checked October 2, 2026

  21. PanaVise Standard Vise: The base has a 4.3125 inch bolt circle for three ¼ inch flat-head screws, not included; the maker catalog identifies interchangeable jaws.

    Exact selected model; manufacturer-stated dimensions, design, mounting and project scope. No measured holding strength, clamping-force comparison, durability or universal workpiece compatibility implied.

    PanaVise Standard Vise documented specifications · Exact model description and dimension table; BESSEY brochure pages 1–2, PanaVise catalog printed page 7, Shop Fox instructions pages 1–2 where applicable
    The base has a 4.3125 inch bolt circle for three ¼ inch flat-head screws, not included; the maker catalog identifies interchangeable jaws.

    Checked October 2, 2026

  22. BESSEY Vacuum Base Vise: BESSEY describes BV-VB as a portable hobbyist vise that rotates and swivels after releasing its locking ring.

    Exact selected model; manufacturer-stated dimensions, design, mounting and project scope. No measured holding strength, clamping-force comparison, durability or universal workpiece compatibility implied.

    BESSEY Vacuum Base Vise documented specifications · Exact model description and dimension table; BESSEY brochure pages 1–2, PanaVise catalog printed page 7, Shop Fox instructions pages 1–2 where applicable
    BESSEY describes BV-VB as a portable hobbyist vise that rotates and swivels after releasing its locking ring.

    Checked October 2, 2026

  23. BESSEY Vacuum Base Vise: The brochure gives a 2¾ inch jaw width and opening, plus an approximate 4½ pound weight.

    Exact selected model; manufacturer-stated dimensions, design, mounting and project scope. No measured holding strength, clamping-force comparison, durability or universal workpiece compatibility implied.

    BESSEY Vacuum Base Vise documented specifications · Exact model description and dimension table; BESSEY brochure pages 1–2, PanaVise catalog printed page 7, Shop Fox instructions pages 1–2 where applicable
    The brochure gives a 2¾ inch jaw width and opening, plus an approximate 4½ pound weight.

    Checked October 2, 2026

  24. BESSEY Vacuum Base Vise: Its vacuum mount requires a nonporous surface, and it comes with rubber jaw pads.

    Exact selected model; manufacturer-stated dimensions, design, mounting and project scope. No measured holding strength, clamping-force comparison, durability or universal workpiece compatibility implied.

    BESSEY Vacuum Base Vise documented specifications · Exact model description and dimension table; BESSEY brochure pages 1–2, PanaVise catalog printed page 7, Shop Fox instructions pages 1–2 where applicable
    Its vacuum mount requires a nonporous surface, and it comes with rubber jaw pads.

    Checked October 2, 2026

  25. Shop Fox Quick-Release Wood Vise: Shop Fox’s D4327 instructions describe a quick-release lever that disengages the leadscrew so the sliding jaw can move freely, plus an adjustable bench dog.

    Exact selected model; manufacturer-stated dimensions, design, mounting and project scope. No measured holding strength, clamping-force comparison, durability or universal workpiece compatibility implied.

    Shop Fox Quick-Release Wood Vise documented specifications · Exact model description and dimension table; BESSEY brochure pages 1–2, PanaVise catalog printed page 7, Shop Fox instructions pages 1–2 where applicable
    Shop Fox’s D4327 instructions describe a quick-release lever that disengages the leadscrew so the sliding jaw can move freely, plus an adjustable bench dog.

    Checked October 2, 2026

  26. Shop Fox Quick-Release Wood Vise: D4327 has a 7 inch jaw width, an 8 inch maximum opening and a 21 pound listed weight.

    Exact selected model; manufacturer-stated dimensions, design, mounting and project scope. No measured holding strength, clamping-force comparison, durability or universal workpiece compatibility implied.

    Shop Fox Quick-Release Wood Vise documented specifications · Exact model description and dimension table; BESSEY brochure pages 1–2, PanaVise catalog printed page 7, Shop Fox instructions pages 1–2 where applicable
    D4327 has a 7 inch jaw width, an 8 inch maximum opening and a 21 pound listed weight.

    Checked October 2, 2026

  27. Shop Fox Quick-Release Wood Vise: The vise is designed for benches at least 2¼ inches thick, adaptable down to 1½ inches with a shim; holes accept separately supplied or shop-made wooden jaw pads.

    Exact selected model; manufacturer-stated dimensions, design, mounting and project scope. No measured holding strength, clamping-force comparison, durability or universal workpiece compatibility implied.

    Shop Fox Quick-Release Wood Vise documented specifications · Exact model description and dimension table; BESSEY brochure pages 1–2, PanaVise catalog printed page 7, Shop Fox instructions pages 1–2 where applicable
    The vise is designed for benches at least 2¼ inches thick, adaptable down to 1½ inches with a shim; holes accept separately supplied or shop-made wooden jaw pads.

    Checked October 2, 2026

  28. BESSEY Light Duty Wood Vise: BESSEY identifies BV-WV65 as a light-duty wood vise for home or work.

    Exact selected model; manufacturer-stated dimensions, design, mounting and project scope. No measured holding strength, clamping-force comparison, durability or universal workpiece compatibility implied.

    BESSEY Light Duty Wood Vise documented specifications · Exact model description and dimension table; BESSEY brochure pages 1–2, PanaVise catalog printed page 7, Shop Fox instructions pages 1–2 where applicable
    BESSEY identifies BV-WV65 as a light-duty wood vise for home or work.

    Checked October 2, 2026

  29. BESSEY Light Duty Wood Vise: The brochure lists a 6 inch jaw width, a 6 inch opening, a 2⅝ inch throat depth and an approximate 8½ pound weight.

    Exact selected model; manufacturer-stated dimensions, design, mounting and project scope. No measured holding strength, clamping-force comparison, durability or universal workpiece compatibility implied.

    BESSEY Light Duty Wood Vise documented specifications · Exact model description and dimension table; BESSEY brochure pages 1–2, PanaVise catalog printed page 7, Shop Fox instructions pages 1–2 where applicable
    The brochure lists a 6 inch jaw width, a 6 inch opening, a 2⅝ inch throat depth and an approximate 8½ pound weight.

    Checked October 2, 2026

  30. BESSEY Light Duty Wood Vise: Its cast-iron body has jaws pre-drilled for attaching wooden facings.

    Exact selected model; manufacturer-stated dimensions, design, mounting and project scope. No measured holding strength, clamping-force comparison, durability or universal workpiece compatibility implied.

    BESSEY Light Duty Wood Vise documented specifications · Exact model description and dimension table; BESSEY brochure pages 1–2, PanaVise catalog printed page 7, Shop Fox instructions pages 1–2 where applicable
    Its cast-iron body has jaws pre-drilled for attaching wooden facings.

    Checked October 2, 2026

Something changed? Help us correct the record.