Our top 10, at a glance.
Choose a handheld circular saw for breaking down wood-based sheet goods, balancing corded or battery operation, cut capacity, guiding options and dust connections.
- #1Makita 5007MGMakita 5007MG
- #2Milwaukee M18 FUEL 2834-20Milwaukee M18 FUEL 2834-20
- #3DEWALT DWE575SBDEWALT DWE575SB
- #4Bosch GKS18V-25CNBosch GKS18V-25CN
- #5DEWALT DCS565BDEWALT DCS565B
- #6FLEX FX2141-ZFLEX FX2141-Z
- #7RYOBI PBLCS302BRYOBI PBLCS302B
- #8RIDGID R8658KRIDGID R8658K
- #9Metabo HPT C7SB3Metabo HPT C7SB3
- #10SKIL 5280-01SKIL 5280-01
All 10 picks, in order.
- #1
Makita 5007MG
Makita 5007MG
A corded package with an included rip fence
Why it fits
- Makita leads for a ready-to-use guiding package: a rip fence and case accompany its 7-1/4-inch blade. Two LEDs and a dust blower address the cut line. Choose it when an outlet is practical and you want the fence included. Maker maximum depths are 2-1/2 inches square, 1-3/4 inches at 45° bevel and 1-3/8 inches at 56°. Bevel travel is 0–56°, with stops at 22.5°, 45° and 56°. These capacities describe geometry rather than tested cut quality. The 15A corded saw lists 10.6lb net weight and includes a 24-tooth blade and wrench. This is 5007MG, distinct from the brake-equipped 5007MGA. A blower redirects chips from the line; vacuum-collection compatibility was not established here. [1] [2] [3]
Model: US 5007MG; 15A corded saw with case · One selected US physical handheld wood-cutting circular saw; supplied accessories are not additional picks. · US
- #2
Milwaukee M18 FUEL 2834-20
Milwaukee M18 FUEL 2834-20
Repeatable depth settings for an existing M18 collection
Why it fits
- Milwaukee suits repeated panel setups with depth detents at 1/2, 3/4 and 1-1/2 inches. Its 7-1/4-inch saw has an LED, a dust port and an included vacuum adapter. The M18 battery and charger are separate. The manual gives maximum depths of 2-5/8 inches square and 2 inches at 45° bevel. Bevel capacity is 50°, with 22.5° and 45° detents. The listed 6,000 RPM is a no-load figure, not our cutting-speed result. A magnesium shoe and guards, electric blade brake and rafter hook round out the configuration. Milwaukee lists compatibility with Rip Fence Kit 49-22-4146; that fence is separate from the included blade, wrench and vacuum adapter. Confirm the whole guiding and extraction setup before buying. [4] [5] [6]
Model: US 2834-20; M18 tool only · One selected US physical handheld wood-cutting circular saw; supplied accessories are not additional picks. · US
- #3
DEWALT DWE575SB
DEWALT DWE575SB
Corded operation with an electric blade brake
Why it fits
- DWE575SB suits a corded setup where a blade brake and a listed 8.8lb tool matter. The selected 15A, 120V saw includes a 7-1/4-inch blade, wrench and contractor bag. No battery is required. The manual states a 2-9/16-inch maximum square-cut depth. Bevel travel reaches 57°, with stops at 22.5° and 45°. A maximum depth at 45° was not established in the retained official material; confirm it if a thick bevel cut decides your purchase. An integrated dust blower addresses line visibility. The manual recommends a DEWALT rip fence for ripping, while the selected package does not list one. Choose compatible guidance separately and verify dust-extraction accessories for this exact model rather than assuming a port is included. [7] [8] [9]
Model: US DWE575SB; 120V corded saw with contractor bag · One selected US physical handheld wood-cutting circular saw; supplied accessories are not additional picks. · US
- #4
Bosch GKS18V-25CN
Bosch GKS18V-25CN
A pivoting dust port with documented hose restrictions
Why it fits
- Bosch suits a planned extractor connection: its dust port rotates 360°, and the maker lists specific hose options. VAC024 is listed for 1-1/4 or 1-1/2-inch hoses; VAC002 is explicitly incompatible. A blower also addresses the cut line. Its 7-1/4-inch blade has maximum depths of 2-1/2 inches square, 1-13/16 inches at 45° and 1-5/8 inches at 50°. Bevel range is 0–50°, with a front lock and an auxiliary handle. This bare tool includes a 24-tooth blade and hex wrench. Select compatible Bosch 18V/AMPShare batteries and charger; Bosch recommends CORE18V high-power packs. GKSRPG is the separately listed rip fence. Budget for that guidance and the matching hose accessories; a dust port alone is not a dust-capture measurement. [10] [11] [12]
Model: US GKS18V-25CN; 18V PROFACTOR bare tool · One selected US physical handheld wood-cutting circular saw; supplied accessories are not additional picks. · US
- #5
DEWALT DCS565B
DEWALT DCS565B
A smaller blade on the DEWALT cordless platform
Why it fits
- DCS565B is the 6-1/2-inch choice for buyers with DEWALT 20V MAX or FLEXVOLT batteries. The selected tool-only package excludes a battery and charger. An LED, rafter hook and electric brake accompany its 0–50° tool-free bevel adjustment. The manual specifies 2-1/8-inch maximum square depth and 1-5/8 inches at 45° bevel. Its shoe has kerf indicators for vertical and bevel cuts. These alignment marks do not turn the saw into a guided track system. The package lists a blade, change wrench and a removable dust chute described as optional. The chute accepts DEWALT AIRLOCK or a standard 35mm extractor connection. Confirm the hose combination and complete handling weight; the smaller blade gives less stated square-cut depth than the larger-blade picks here. [13] [14] [15]
Model: US DCS565B; 20V MAX XR 6-1/2-inch tool only · One selected US physical handheld wood-cutting circular saw; supplied accessories are not additional picks. · US
- #6
FLEX FX2141-Z
FLEX FX2141-Z
Large stated capacity with a separately available rip fence
Why it fits
- FLEX suits an existing FLEX 24V user who wants a 7-1/4-inch saw with an LED and magnesium footplate and guards. The selected FX2141-Z is the tool-only configuration, including a vacuum adapter, blade wrench and 24-tooth blade. Maker maximum depths are 2-5/8 inches square and 1-7/8 inches at 45° bevel, with a 0–56° bevel range. Tool weight is 9lb without the battery; account for the pack you choose. No cutting-speed or runtime advantage is asserted. The manual identifies FT211 as an optional rip fence, not included. It also describes a board guide for sheet widths beyond the fence’s reach. Battery and charger are separate for this selection; the kit pictured on the same page has different contents. [16] [17] [18]
Model: US FX2141-Z; FLEX 24V tool only · One selected US physical handheld wood-cutting circular saw; supplied accessories are not additional picks. · US
- #7
RYOBI PBLCS302B
RYOBI PBLCS302B
Many bevel detents on the ONE+ platform
Why it fits
- RYOBI suits existing 18V ONE+ users who want a 7-1/4-inch saw with a 0–56° bevel range. Detents cover 0°, 15°, 22.5°, 30°, 45° and 56°. This is the current PBLCS302B, distinct from the discontinued PBLCS300B. The maker page and manual agree on 2-9/16-inch maximum square-cut depth. They differ at 45°: the page states 1-27/32 inches and the manual 1-13/16 inches. Confirm the exact 45° capacity before selecting it for a close-fitting bevel cut. Its vacuum port includes an adapter for 1-1/4 to 1-7/8-inch hoses. A pommel handle and rafter hook accompany the controls; the manual describes clamped-straightedge guidance. Battery, charger and extractor are separate. Do not interpret the connection as proof of a capture rate. [19] [20] [21]
Model: US PBLCS302B; ONE+ HP GEN II tool only · One selected US physical handheld wood-cutting circular saw; supplied accessories are not additional picks. · US
- #8
RIDGID R8658K
RIDGID R8658K
A blade-left rear-handle kit for RIDGID batteries
Why it fits
- R8658K suits buyers who prefer a rear handle and blade on the left. This kit includes the R8658 saw, an 8.0Ah MAX Output EXP battery, rapid charger, blade, wrench and vacuum attachment. It is compatible with RIDGID 18V batteries. The 7-1/4-inch blade has listed maximum depths of 2-1/2 inches square and 1-7/8 inches at 45° bevel. Bevel capacity is 53°, and the features include an LED and electric brake. No faster-cutting or safety advantage is inferred. A kit simplifies buying the power components, but the page’s 9.5lb product-weight field does not establish complete kit or assembled weight. Check handling with the supplied pack. A compatible guiding accessory was not established here; verify your guiding setup separately rather than assuming a rail or fence is included. [22] [23] [24]
Model: US R8658K; R8658 rear-handle saw and 8.0Ah kit · One selected US physical handheld wood-cutting circular saw; supplied accessories are not additional picks. · US
- #9
Metabo HPT C7SB3
Metabo HPT C7SB3
An aluminum base with readable scales and optional guidance
Why it fits
- C7SB3 suits a corded setup where a one-piece aluminum base and front and side scales matter. The selected saw includes a 7-1/4-inch blade, bag and hex wrench. Its 15A motor has a listed 6,000 RPM no-load speed. Official maximum depths are 2-7/16 inches square and 1-7/8 inches at 45° bevel. Bevel travel reaches 55°. The maker lists Rip Fence Guide 302691, Wing Bolt 302697 and Lock Spring 947859 as optional accessories. A dust blower addresses the cut line, while the specification table explicitly lists no light, laser or electric brake. Choose it for the base and corded package, and buy the exact guidance parts needed. Extractor compatibility was not established in the retained details. [25] [26] [27]
Model: US C7SB3; 15A corded saw with bag · One selected US physical handheld wood-cutting circular saw; supplied accessories are not additional picks. · US
- #10
SKIL 5280-01
SKIL 5280-01
A laser alignment cue for a corded DIY setup
Why it fits
- SKIL suits buyers who want a single-beam laser and wide footplate in a corded package. It includes a 7-1/4-inch 24-tooth blade, wrench and carrying bag. The 15A motor is listed at up to 5,300 RPM. SKIL states maximum depths of 2-7/16 inches square and 1-15/16 inches at 45° bevel, with 51° bevel travel and a 45° stop. Treat the laser as an alignment cue and confirm the setup rather than assuming a measured accuracy guarantee. A rear depth-adjustment lever, spindle lock and on-tool wrench storage support setup. Its integrated dust blower moves sawdust away from the cut line. Choose it for its corded package and alignment features; an extractor connection was not established in the retained maker details. [28] [29] [30]
Model: US 5280-01; 15A corded saw with laser and bag · One selected US physical handheld wood-cutting circular saw; supplied accessories are not additional picks. · US
The details, side by side.
| What matters | #1Makita 5007MG | #2Milwaukee M18 FUEL 2834-20 | #3DEWALT DWE575SB | #4Bosch GKS18V-25CN | #5DEWALT DCS565B | #6FLEX FX2141-Z | #7RYOBI PBLCS302B | #8RIDGID R8658K | #9Metabo HPT C7SB3 | #10SKIL 5280-01 |
|---|---|---|---|---|---|---|---|---|---|---|
| Workflow | Makita leads for a ready-to-use guiding package: a rip fence and case accompany its 7-1/4-inch blade. Two LEDs and a dust blower address the cut line. Choose it when an outlet is practical and you want the fence included. [1] | Milwaukee suits repeated panel setups with depth detents at 1/2, 3/4 and 1-1/2 inches. Its 7-1/4-inch saw has an LED, a dust port and an included vacuum adapter. The M18 battery and charger are separate. [4] | DWE575SB suits a corded setup where a blade brake and a listed 8.8lb tool matter. The selected 15A, 120V saw includes a 7-1/4-inch blade, wrench and contractor bag. No battery is required. [7] | Bosch suits a planned extractor connection: its dust port rotates 360°, and the maker lists specific hose options. VAC024 is listed for 1-1/4 or 1-1/2-inch hoses; VAC002 is explicitly incompatible. A blower also addresses the cut line. [10] | DCS565B is the 6-1/2-inch choice for buyers with DEWALT 20V MAX or FLEXVOLT batteries. The selected tool-only package excludes a battery and charger. An LED, rafter hook and electric brake accompany its 0–50° tool-free bevel adjustment. [13] | FLEX suits an existing FLEX 24V user who wants a 7-1/4-inch saw with an LED and magnesium footplate and guards. The selected FX2141-Z is the tool-only configuration, including a vacuum adapter, blade wrench and 24-tooth blade. [16] | RYOBI suits existing 18V ONE+ users who want a 7-1/4-inch saw with a 0–56° bevel range. Detents cover 0°, 15°, 22.5°, 30°, 45° and 56°. This is the current PBLCS302B, distinct from the discontinued PBLCS300B. [19] | R8658K suits buyers who prefer a rear handle and blade on the left. This kit includes the R8658 saw, an 8.0Ah MAX Output EXP battery, rapid charger, blade, wrench and vacuum attachment. It is compatible with RIDGID 18V batteries. [22] | C7SB3 suits a corded setup where a one-piece aluminum base and front and side scales matter. The selected saw includes a 7-1/4-inch blade, bag and hex wrench. Its 15A motor has a listed 6,000 RPM no-load speed. [25] | SKIL suits buyers who want a single-beam laser and wide footplate in a corded package. It includes a 7-1/4-inch 24-tooth blade, wrench and carrying bag. The 15A motor is listed at up to 5,300 RPM. [28] |
| Compatibility | Maker maximum depths are 2-1/2 inches square, 1-3/4 inches at 45° bevel and 1-3/8 inches at 56°. Bevel travel is 0–56°, with stops at 22.5°, 45° and 56°. These capacities describe geometry rather than tested cut quality. [2] | The manual gives maximum depths of 2-5/8 inches square and 2 inches at 45° bevel. Bevel capacity is 50°, with 22.5° and 45° detents. The listed 6,000 RPM is a no-load figure, not our cutting-speed result. [5] | The manual states a 2-9/16-inch maximum square-cut depth. Bevel travel reaches 57°, with stops at 22.5° and 45°. A maximum depth at 45° was not established in the retained official material; confirm it if a thick bevel cut decides your purchase. [8] | Its 7-1/4-inch blade has maximum depths of 2-1/2 inches square, 1-13/16 inches at 45° and 1-5/8 inches at 50°. Bevel range is 0–50°, with a front lock and an auxiliary handle. [11] | The manual specifies 2-1/8-inch maximum square depth and 1-5/8 inches at 45° bevel. Its shoe has kerf indicators for vertical and bevel cuts. These alignment marks do not turn the saw into a guided track system. [14] | Maker maximum depths are 2-5/8 inches square and 1-7/8 inches at 45° bevel, with a 0–56° bevel range. Tool weight is 9lb without the battery; account for the pack you choose. No cutting-speed or runtime advantage is asserted. [17] | The maker page and manual agree on 2-9/16-inch maximum square-cut depth. They differ at 45°: the page states 1-27/32 inches and the manual 1-13/16 inches. Confirm the exact 45° capacity before selecting it for a close-fitting bevel cut. [20] | The 7-1/4-inch blade has listed maximum depths of 2-1/2 inches square and 1-7/8 inches at 45° bevel. Bevel capacity is 53°, and the features include an LED and electric brake. No faster-cutting or safety advantage is inferred. [23] | Official maximum depths are 2-7/16 inches square and 1-7/8 inches at 45° bevel. Bevel travel reaches 55°. The maker lists Rip Fence Guide 302691, Wing Bolt 302697 and Lock Spring 947859 as optional accessories. [26] | SKIL states maximum depths of 2-7/16 inches square and 1-15/16 inches at 45° bevel, with 51° bevel travel and a 45° stop. Treat the laser as an alignment cue and confirm the setup rather than assuming a measured accuracy guarantee. [29] |
| Form factor | The 15A corded saw lists 10.6lb net weight and includes a 24-tooth blade and wrench. This is 5007MG, distinct from the brake-equipped 5007MGA. A blower redirects chips from the line; vacuum-collection compatibility was not established here. [3] | A magnesium shoe and guards, electric blade brake and rafter hook round out the configuration. Milwaukee lists compatibility with Rip Fence Kit 49-22-4146; that fence is separate from the included blade, wrench and vacuum adapter. Confirm the whole guiding and extraction setup before buying. [6] | An integrated dust blower addresses line visibility. The manual recommends a DEWALT rip fence for ripping, while the selected package does not list one. Choose compatible guidance separately and verify dust-extraction accessories for this exact model rather than assuming a port is included. [9] | This bare tool includes a 24-tooth blade and hex wrench. Select compatible Bosch 18V/AMPShare batteries and charger; Bosch recommends CORE18V high-power packs. GKSRPG is the separately listed rip fence. Budget for that guidance and the matching hose accessories; a dust port alone is not a dust-capture measurement. [12] | The package lists a blade, change wrench and a removable dust chute described as optional. The chute accepts DEWALT AIRLOCK or a standard 35mm extractor connection. Confirm the hose combination and complete handling weight; the smaller blade gives less stated square-cut depth than the larger-blade picks here. [15] | The manual identifies FT211 as an optional rip fence, not included. It also describes a board guide for sheet widths beyond the fence’s reach. Battery and charger are separate for this selection; the kit pictured on the same page has different contents. [18] | Its vacuum port includes an adapter for 1-1/4 to 1-7/8-inch hoses. A pommel handle and rafter hook accompany the controls; the manual describes clamped-straightedge guidance. Battery, charger and extractor are separate. Do not interpret the connection as proof of a capture rate. [21] | A kit simplifies buying the power components, but the page’s 9.5lb product-weight field does not establish complete kit or assembled weight. Check handling with the supplied pack. A compatible guiding accessory was not established here; verify your guiding setup separately rather than assuming a rail or fence is included. [24] | A dust blower addresses the cut line, while the specification table explicitly lists no light, laser or electric brake. Choose it for the base and corded package, and buy the exact guidance parts needed. Extractor compatibility was not established in the retained details. [27] | A rear depth-adjustment lever, spindle lock and on-tool wrench storage support setup. Its integrated dust blower moves sawdust away from the cut line. Choose it for its corded package and alignment features; an extractor connection was not established in the retained maker details. [30] |
Compare depth at the angle you will cut
Square-cut capacity is the maximum with the blade perpendicular to the shoe: some makers call that 90°, others 0° bevel. Capacity drops at a bevel. Makita documents three angles; Bosch lists 90°, 45° and 50°. Milwaukee’s manual gives 2 inches at 45°, while DEWALT’s smaller DCS565 lists 1-5/8 inches. Match the documented angle and material thickness rather than choosing only by blade diameter. [2] [11] [5] [14]
RYOBI’s page and manual differ on 45° depth, and a 45° maximum was not established for DWE575SB in the retained official material. Confirm those details before a close-capacity purchase. A bevel limit describes the adjustment range; it does not prove a cut will be clean or square. [20] [8]
Plan guidance, visibility and extraction together
Makita includes a rip fence. Milwaukee lists a compatible fence separately, Bosch lists GKSRPG, FLEX identifies optional FT211, and Metabo HPT lists specific guide hardware. RYOBI’s manual describes straightedge guidance. DEWALT DCS565 has kerf marks and SKIL adds a laser. None of these descriptions establishes universal rail compatibility or a finished-edge quality guarantee. [1] [6] [12] [18] [26] [21] [14] [28]
A blower moves chips away from the line; a vacuum port connects to extraction equipment. SKIL lists a blower for its cut line. Bosch documents incompatible as well as compatible adapters, while RYOBI specifies an included hose-size adapter. Match the connector and extractor before buying; these provisions are not measured dust-capture results. [30] [10] [21]
Compare complete power setups. Makita, DWE575SB, Metabo HPT and SKIL are corded selections. The chosen Milwaukee, Bosch, DCS565, FLEX and RYOBI configurations need batteries and chargers separately. RIDGID’s selected kit supplies both. FLEX’s listed 9lb excludes its battery, so compare the assembled tool with the pack you intend to use. [3] [7] [25] [28] [4] [12] [13] [17] [18] [21] [22]
How we compared.
Source-based comparison of US maker pages and manuals read October 3, 2026, with a focused reading of TechGearLab’s SKIL 5280-01 review. That review reported indoor dust scatter and harder-to-see unpainted angle markings in some lighting; those attributed comments informed the emphasis on visibility and extraction. Makita leads for its included rip fence, case, lights and documented bevel capacities; cordless picks emphasize platform fit and dust connections. These are handheld circular saws, with no track-system compatibility presumed. We have not tested cutting speed, finish, runtime, dust capture or safety outcomes. Capacities are manufacturer specifications, not our measurements. Ranking is independent of commission.
How we chooseSources
Official product documentation, reviewed October 3, 2026.
Makita · US · Read October 4, 2026
DEWALT · US · Read October 4, 2026
DEWALT · US · Read October 4, 2026
Milwaukee Tool · US · Read October 4, 2026
Milwaukee Tool · US · Read October 4, 2026
Bosch · US · Read October 4, 2026
DEWALT · US · Read October 4, 2026
DEWALT · US · Read October 4, 2026
RYOBI · US · Read October 4, 2026
RYOBI / TTI Consumer Power Tools · US · Read October 4, 2026
FLEX · US · Read October 4, 2026
FLEX · US · Read October 4, 2026
RIDGID · US · Read October 4, 2026
Metabo HPT · US · Read October 4, 2026
SKIL · US · Read October 4, 2026
TechGearLab; Matt Lighthart · US · Read October 4, 2026
Detailed source notes
- Makita 5007MG: Makita leads for a ready-to-use guiding package: a rip fence and case accompany its 7-1/4-inch blade. Two LEDs and a dust blower address the cut line. Choose it when an outlet is practical and you want the fence included.
Exact US model and specified package. Square means blade perpendicular to shoe, 0° bevel or 90° blade-to-shoe. Maximum cut depths are angle-specific maker statements, not measured cutting performance. Dust connections, blowers, brakes and lights do not establish tested capture, accuracy or safety outcomes. Follow the exact saw, blade, guide and material instructions. Do not assume track-system or cross-brand battery compatibility.
5007MG magnesium circular saw · Actual direct fetched HTML body read /private/tmp/tb228-makita-readable.txt lines518-609
Makita leads for a ready-to-use guiding package: a rip fence and case accompany its 7-1/4-inch blade. Two LEDs and a dust blower address the cut line. Choose it when an outlet is practical and you want the fence included.Checked October 3, 2026
- Makita 5007MG: Maker maximum depths are 2-1/2 inches square, 1-3/4 inches at 45° bevel and 1-3/8 inches at 56°. Bevel travel is 0–56°, with stops at 22.5°, 45° and 56°. These capacities describe geometry rather than tested cut quality.
Exact US model and specified package. Square means blade perpendicular to shoe, 0° bevel or 90° blade-to-shoe. Maximum cut depths are angle-specific maker statements, not measured cutting performance. Dust connections, blowers, brakes and lights do not establish tested capture, accuracy or safety outcomes. Follow the exact saw, blade, guide and material instructions. Do not assume track-system or cross-brand battery compatibility.
5007MG magnesium circular saw · Actual direct fetched HTML body read /private/tmp/tb228-makita-readable.txt lines518-609
Maker maximum depths are 2-1/2 inches square, 1-3/4 inches at 45° bevel and 1-3/8 inches at 56°. Bevel travel is 0–56°, with stops at 22.5°, 45° and 56°. These capacities describe geometry rather than tested cut quality.Checked October 3, 2026
- Makita 5007MG: The 15A corded saw lists 10.6lb net weight and includes a 24-tooth blade and wrench. This is 5007MG, distinct from the brake-equipped 5007MGA. A blower redirects chips from the line; vacuum-collection compatibility was not established here.
Exact US model and specified package. Square means blade perpendicular to shoe, 0° bevel or 90° blade-to-shoe. Maximum cut depths are angle-specific maker statements, not measured cutting performance. Dust connections, blowers, brakes and lights do not establish tested capture, accuracy or safety outcomes. Follow the exact saw, blade, guide and material instructions. Do not assume track-system or cross-brand battery compatibility.
5007MG magnesium circular saw · Actual direct fetched HTML body read /private/tmp/tb228-makita-readable.txt lines518-609
The 15A corded saw lists 10.6lb net weight and includes a 24-tooth blade and wrench. This is 5007MG, distinct from the brake-equipped 5007MGA. A blower redirects chips from the line; vacuum-collection compatibility was not established here.Checked October 3, 2026
- Milwaukee M18 FUEL 2834-20: Milwaukee suits repeated panel setups with depth detents at 1/2, 3/4 and 1-1/2 inches. Its 7-1/4-inch saw has an LED, a dust port and an included vacuum adapter. The M18 battery and charger are separate.
Exact US model and specified package. Square means blade perpendicular to shoe, 0° bevel or 90° blade-to-shoe. Maximum cut depths are angle-specific maker statements, not measured cutting performance. Dust connections, blowers, brakes and lights do not establish tested capture, accuracy or safety outcomes. Follow the exact saw, blade, guide and material instructions. Do not assume track-system or cross-brand battery compatibility.
M18 FUEL 2834-20 circular saw · turn1802view0 lines888-923 and turn1804view8 lines935-959
Milwaukee suits repeated panel setups with depth detents at 1/2, 3/4 and 1-1/2 inches. Its 7-1/4-inch saw has an LED, a dust port and an included vacuum adapter. The M18 battery and charger are separate.2834-20 operator manual · Actual curl PDF parsed with bundled pypdf /private/tmp/tb228-milwaukee-manual-readable.txt English SPECIFICATIONS
Milwaukee suits repeated panel setups with depth detents at 1/2, 3/4 and 1-1/2 inches. Its 7-1/4-inch saw has an LED, a dust port and an included vacuum adapter. The M18 battery and charger are separate.Checked October 3, 2026
- Milwaukee M18 FUEL 2834-20: The manual gives maximum depths of 2-5/8 inches square and 2 inches at 45° bevel. Bevel capacity is 50°, with 22.5° and 45° detents. The listed 6,000 RPM is a no-load figure, not our cutting-speed result.
Exact US model and specified package. Square means blade perpendicular to shoe, 0° bevel or 90° blade-to-shoe. Maximum cut depths are angle-specific maker statements, not measured cutting performance. Dust connections, blowers, brakes and lights do not establish tested capture, accuracy or safety outcomes. Follow the exact saw, blade, guide and material instructions. Do not assume track-system or cross-brand battery compatibility.
M18 FUEL 2834-20 circular saw · turn1802view0 lines888-923 and turn1804view8 lines935-959
The manual gives maximum depths of 2-5/8 inches square and 2 inches at 45° bevel. Bevel capacity is 50°, with 22.5° and 45° detents. The listed 6,000 RPM is a no-load figure, not our cutting-speed result.2834-20 operator manual · Actual curl PDF parsed with bundled pypdf /private/tmp/tb228-milwaukee-manual-readable.txt English SPECIFICATIONS
The manual gives maximum depths of 2-5/8 inches square and 2 inches at 45° bevel. Bevel capacity is 50°, with 22.5° and 45° detents. The listed 6,000 RPM is a no-load figure, not our cutting-speed result.Checked October 3, 2026
- Milwaukee M18 FUEL 2834-20: A magnesium shoe and guards, electric blade brake and rafter hook round out the configuration. Milwaukee lists compatibility with Rip Fence Kit 49-22-4146; that fence is separate from the included blade, wrench and vacuum adapter. Confirm the whole guiding and extraction setup before buying.
Exact US model and specified package. Square means blade perpendicular to shoe, 0° bevel or 90° blade-to-shoe. Maximum cut depths are angle-specific maker statements, not measured cutting performance. Dust connections, blowers, brakes and lights do not establish tested capture, accuracy or safety outcomes. Follow the exact saw, blade, guide and material instructions. Do not assume track-system or cross-brand battery compatibility.
M18 FUEL 2834-20 circular saw · turn1802view0 lines888-923 and turn1804view8 lines935-959
A magnesium shoe and guards, electric blade brake and rafter hook round out the configuration. Milwaukee lists compatibility with Rip Fence Kit 49-22-4146; that fence is separate from the included blade, wrench and vacuum adapter. Confirm the whole guiding and extraction setup before buying.2834-20 operator manual · Actual curl PDF parsed with bundled pypdf /private/tmp/tb228-milwaukee-manual-readable.txt English SPECIFICATIONS
A magnesium shoe and guards, electric blade brake and rafter hook round out the configuration. Milwaukee lists compatibility with Rip Fence Kit 49-22-4146; that fence is separate from the included blade, wrench and vacuum adapter. Confirm the whole guiding and extraction setup before buying.Checked October 3, 2026
- DEWALT DWE575SB: DWE575SB suits a corded setup where a blade brake and a listed 8.8lb tool matter. The selected 15A, 120V saw includes a 7-1/4-inch blade, wrench and contractor bag. No battery is required.
Exact US model and specified package. Square means blade perpendicular to shoe, 0° bevel or 90° blade-to-shoe. Maximum cut depths are angle-specific maker statements, not measured cutting performance. Dust connections, blowers, brakes and lights do not establish tested capture, accuracy or safety outcomes. Follow the exact saw, blade, guide and material instructions. Do not assume track-system or cross-brand battery compatibility.
DWE575SB corded circular saw with contractor bag · Actual direct fetched HTML body read /private/tmp/tb228-dewalt-readable.txt Product details Features Specs Includes
DWE575SB suits a corded setup where a blade brake and a listed 8.8lb tool matter. The selected 15A, 120V saw includes a 7-1/4-inch blade, wrench and contractor bag. No battery is required.DWE574 DWE575 DWE575SB instruction manual · Actual curl PDF parsed with bundled pypdf /private/tmp/tb228-dewalt-manual-readable.txt English cutting depth/bevel/ripping paragraphs
DWE575SB suits a corded setup where a blade brake and a listed 8.8lb tool matter. The selected 15A, 120V saw includes a 7-1/4-inch blade, wrench and contractor bag. No battery is required.Checked October 3, 2026
- DEWALT DWE575SB: The manual states a 2-9/16-inch maximum square-cut depth. Bevel travel reaches 57°, with stops at 22.5° and 45°. A maximum depth at 45° was not established in the retained official material; confirm it if a thick bevel cut decides your purchase.
Exact US model and specified package. Square means blade perpendicular to shoe, 0° bevel or 90° blade-to-shoe. Maximum cut depths are angle-specific maker statements, not measured cutting performance. Dust connections, blowers, brakes and lights do not establish tested capture, accuracy or safety outcomes. Follow the exact saw, blade, guide and material instructions. Do not assume track-system or cross-brand battery compatibility.
DWE575SB corded circular saw with contractor bag · Actual direct fetched HTML body read /private/tmp/tb228-dewalt-readable.txt Product details Features Specs Includes
The manual states a 2-9/16-inch maximum square-cut depth. Bevel travel reaches 57°, with stops at 22.5° and 45°. A maximum depth at 45° was not established in the retained official material; confirm it if a thick bevel cut decides your purchase.DWE574 DWE575 DWE575SB instruction manual · Actual curl PDF parsed with bundled pypdf /private/tmp/tb228-dewalt-manual-readable.txt English cutting depth/bevel/ripping paragraphs
The manual states a 2-9/16-inch maximum square-cut depth. Bevel travel reaches 57°, with stops at 22.5° and 45°. A maximum depth at 45° was not established in the retained official material; confirm it if a thick bevel cut decides your purchase.Checked October 3, 2026
- DEWALT DWE575SB: An integrated dust blower addresses line visibility. The manual recommends a DEWALT rip fence for ripping, while the selected package does not list one. Choose compatible guidance separately and verify dust-extraction accessories for this exact model rather than assuming a port is included.
Exact US model and specified package. Square means blade perpendicular to shoe, 0° bevel or 90° blade-to-shoe. Maximum cut depths are angle-specific maker statements, not measured cutting performance. Dust connections, blowers, brakes and lights do not establish tested capture, accuracy or safety outcomes. Follow the exact saw, blade, guide and material instructions. Do not assume track-system or cross-brand battery compatibility.
DWE575SB corded circular saw with contractor bag · Actual direct fetched HTML body read /private/tmp/tb228-dewalt-readable.txt Product details Features Specs Includes
An integrated dust blower addresses line visibility. The manual recommends a DEWALT rip fence for ripping, while the selected package does not list one. Choose compatible guidance separately and verify dust-extraction accessories for this exact model rather than assuming a port is included.DWE574 DWE575 DWE575SB instruction manual · Actual curl PDF parsed with bundled pypdf /private/tmp/tb228-dewalt-manual-readable.txt English cutting depth/bevel/ripping paragraphs
An integrated dust blower addresses line visibility. The manual recommends a DEWALT rip fence for ripping, while the selected package does not list one. Choose compatible guidance separately and verify dust-extraction accessories for this exact model rather than assuming a port is included.Checked October 3, 2026
- Bosch GKS18V-25CN: Bosch suits a planned extractor connection: its dust port rotates 360°, and the maker lists specific hose options. VAC024 is listed for 1-1/4 or 1-1/2-inch hoses; VAC002 is explicitly incompatible. A blower also addresses the cut line.
Exact US model and specified package. Square means blade perpendicular to shoe, 0° bevel or 90° blade-to-shoe. Maximum cut depths are angle-specific maker statements, not measured cutting performance. Dust connections, blowers, brakes and lights do not establish tested capture, accuracy or safety outcomes. Follow the exact saw, blade, guide and material instructions. Do not assume track-system or cross-brand battery compatibility.
GKS18V-25CN PROFACTOR cordless circular saw · turn1801view2 lines475-550;turn1804view7 lines458-469
Bosch suits a planned extractor connection: its dust port rotates 360°, and the maker lists specific hose options. VAC024 is listed for 1-1/4 or 1-1/2-inch hoses; VAC002 is explicitly incompatible. A blower also addresses the cut line.Checked October 3, 2026
- Bosch GKS18V-25CN: Its 7-1/4-inch blade has maximum depths of 2-1/2 inches square, 1-13/16 inches at 45° and 1-5/8 inches at 50°. Bevel range is 0–50°, with a front lock and an auxiliary handle.
Exact US model and specified package. Square means blade perpendicular to shoe, 0° bevel or 90° blade-to-shoe. Maximum cut depths are angle-specific maker statements, not measured cutting performance. Dust connections, blowers, brakes and lights do not establish tested capture, accuracy or safety outcomes. Follow the exact saw, blade, guide and material instructions. Do not assume track-system or cross-brand battery compatibility.
GKS18V-25CN PROFACTOR cordless circular saw · turn1801view2 lines475-550;turn1804view7 lines458-469
Its 7-1/4-inch blade has maximum depths of 2-1/2 inches square, 1-13/16 inches at 45° and 1-5/8 inches at 50°. Bevel range is 0–50°, with a front lock and an auxiliary handle.Checked October 3, 2026
- Bosch GKS18V-25CN: This bare tool includes a 24-tooth blade and hex wrench. Select compatible Bosch 18V/AMPShare batteries and charger; Bosch recommends CORE18V high-power packs. GKSRPG is the separately listed rip fence. Budget for that guidance and the matching hose accessories; a dust port alone is not a dust-capture measurement.
Exact US model and specified package. Square means blade perpendicular to shoe, 0° bevel or 90° blade-to-shoe. Maximum cut depths are angle-specific maker statements, not measured cutting performance. Dust connections, blowers, brakes and lights do not establish tested capture, accuracy or safety outcomes. Follow the exact saw, blade, guide and material instructions. Do not assume track-system or cross-brand battery compatibility.
GKS18V-25CN PROFACTOR cordless circular saw · turn1801view2 lines475-550;turn1804view7 lines458-469
This bare tool includes a 24-tooth blade and hex wrench. Select compatible Bosch 18V/AMPShare batteries and charger; Bosch recommends CORE18V high-power packs. GKSRPG is the separately listed rip fence. Budget for that guidance and the matching hose accessories; a dust port alone is not a dust-capture measurement.Checked October 3, 2026
- DEWALT DCS565B: DCS565B is the 6-1/2-inch choice for buyers with DEWALT 20V MAX or FLEXVOLT batteries. The selected tool-only package excludes a battery and charger. An LED, rafter hook and electric brake accompany its 0–50° tool-free bevel adjustment.
Exact US model and specified package. Square means blade perpendicular to shoe, 0° bevel or 90° blade-to-shoe. Maximum cut depths are angle-specific maker statements, not measured cutting performance. Dust connections, blowers, brakes and lights do not establish tested capture, accuracy or safety outcomes. Follow the exact saw, blade, guide and material instructions. Do not assume track-system or cross-brand battery compatibility.
DCS565B compact cordless circular saw · Actual direct fetched HTML body read /private/tmp/tb228-dcs565-readable.txt Product details Features Includes
DCS565B is the 6-1/2-inch choice for buyers with DEWALT 20V MAX or FLEXVOLT batteries. The selected tool-only package excludes a battery and charger. An LED, rafter hook and electric brake accompany its 0–50° tool-free bevel adjustment.DCS565 cut capacity and kerf indicator manual · turn1806view3 PDFpage11 lines803-805 and turn1804view2 PDFpage13 lines933-945
DCS565B is the 6-1/2-inch choice for buyers with DEWALT 20V MAX or FLEXVOLT batteries. The selected tool-only package excludes a battery and charger. An LED, rafter hook and electric brake accompany its 0–50° tool-free bevel adjustment.Checked October 3, 2026
- DEWALT DCS565B: The manual specifies 2-1/8-inch maximum square depth and 1-5/8 inches at 45° bevel. Its shoe has kerf indicators for vertical and bevel cuts. These alignment marks do not turn the saw into a guided track system.
Exact US model and specified package. Square means blade perpendicular to shoe, 0° bevel or 90° blade-to-shoe. Maximum cut depths are angle-specific maker statements, not measured cutting performance. Dust connections, blowers, brakes and lights do not establish tested capture, accuracy or safety outcomes. Follow the exact saw, blade, guide and material instructions. Do not assume track-system or cross-brand battery compatibility.
DCS565B compact cordless circular saw · Actual direct fetched HTML body read /private/tmp/tb228-dcs565-readable.txt Product details Features Includes
The manual specifies 2-1/8-inch maximum square depth and 1-5/8 inches at 45° bevel. Its shoe has kerf indicators for vertical and bevel cuts. These alignment marks do not turn the saw into a guided track system.DCS565 cut capacity and kerf indicator manual · turn1806view3 PDFpage11 lines803-805 and turn1804view2 PDFpage13 lines933-945
The manual specifies 2-1/8-inch maximum square depth and 1-5/8 inches at 45° bevel. Its shoe has kerf indicators for vertical and bevel cuts. These alignment marks do not turn the saw into a guided track system.Checked October 3, 2026
- DEWALT DCS565B: The package lists a blade, change wrench and a removable dust chute described as optional. The chute accepts DEWALT AIRLOCK or a standard 35mm extractor connection. Confirm the hose combination and complete handling weight; the smaller blade gives less stated square-cut depth than the larger-blade picks here.
Exact US model and specified package. Square means blade perpendicular to shoe, 0° bevel or 90° blade-to-shoe. Maximum cut depths are angle-specific maker statements, not measured cutting performance. Dust connections, blowers, brakes and lights do not establish tested capture, accuracy or safety outcomes. Follow the exact saw, blade, guide and material instructions. Do not assume track-system or cross-brand battery compatibility.
DCS565B compact cordless circular saw · Actual direct fetched HTML body read /private/tmp/tb228-dcs565-readable.txt Product details Features Includes
The package lists a blade, change wrench and a removable dust chute described as optional. The chute accepts DEWALT AIRLOCK or a standard 35mm extractor connection. Confirm the hose combination and complete handling weight; the smaller blade gives less stated square-cut depth than the larger-blade picks here.DCS565 cut capacity and kerf indicator manual · turn1806view3 PDFpage11 lines803-805 and turn1804view2 PDFpage13 lines933-945
The package lists a blade, change wrench and a removable dust chute described as optional. The chute accepts DEWALT AIRLOCK or a standard 35mm extractor connection. Confirm the hose combination and complete handling weight; the smaller blade gives less stated square-cut depth than the larger-blade picks here.Checked October 3, 2026
- FLEX FX2141-Z: FLEX suits an existing FLEX 24V user who wants a 7-1/4-inch saw with an LED and magnesium footplate and guards. The selected FX2141-Z is the tool-only configuration, including a vacuum adapter, blade wrench and 24-tooth blade.
Exact US model and specified package. Square means blade perpendicular to shoe, 0° bevel or 90° blade-to-shoe. Maximum cut depths are angle-specific maker statements, not measured cutting performance. Dust connections, blowers, brakes and lights do not establish tested capture, accuracy or safety outcomes. Follow the exact saw, blade, guide and material instructions. Do not assume track-system or cross-brand battery compatibility.
FX2141 circular saw configurations and specs · turn1804view0 lines181-229
FLEX suits an existing FLEX 24V user who wants a 7-1/4-inch saw with an LED and magnesium footplate and guards. The selected FX2141-Z is the tool-only configuration, including a vacuum adapter, blade wrench and 24-tooth blade.FX2141 operator manual rip fence and board guide · turn1809view1 PDFpage19 lines937-954
FLEX suits an existing FLEX 24V user who wants a 7-1/4-inch saw with an LED and magnesium footplate and guards. The selected FX2141-Z is the tool-only configuration, including a vacuum adapter, blade wrench and 24-tooth blade.Checked October 3, 2026
- FLEX FX2141-Z: Maker maximum depths are 2-5/8 inches square and 1-7/8 inches at 45° bevel, with a 0–56° bevel range. Tool weight is 9lb without the battery; account for the pack you choose. No cutting-speed or runtime advantage is asserted.
Exact US model and specified package. Square means blade perpendicular to shoe, 0° bevel or 90° blade-to-shoe. Maximum cut depths are angle-specific maker statements, not measured cutting performance. Dust connections, blowers, brakes and lights do not establish tested capture, accuracy or safety outcomes. Follow the exact saw, blade, guide and material instructions. Do not assume track-system or cross-brand battery compatibility.
FX2141 circular saw configurations and specs · turn1804view0 lines181-229
Maker maximum depths are 2-5/8 inches square and 1-7/8 inches at 45° bevel, with a 0–56° bevel range. Tool weight is 9lb without the battery; account for the pack you choose. No cutting-speed or runtime advantage is asserted.FX2141 operator manual rip fence and board guide · turn1809view1 PDFpage19 lines937-954
Maker maximum depths are 2-5/8 inches square and 1-7/8 inches at 45° bevel, with a 0–56° bevel range. Tool weight is 9lb without the battery; account for the pack you choose. No cutting-speed or runtime advantage is asserted.Checked October 3, 2026
- FLEX FX2141-Z: The manual identifies FT211 as an optional rip fence, not included. It also describes a board guide for sheet widths beyond the fence’s reach. Battery and charger are separate for this selection; the kit pictured on the same page has different contents.
Exact US model and specified package. Square means blade perpendicular to shoe, 0° bevel or 90° blade-to-shoe. Maximum cut depths are angle-specific maker statements, not measured cutting performance. Dust connections, blowers, brakes and lights do not establish tested capture, accuracy or safety outcomes. Follow the exact saw, blade, guide and material instructions. Do not assume track-system or cross-brand battery compatibility.
FX2141 circular saw configurations and specs · turn1804view0 lines181-229
The manual identifies FT211 as an optional rip fence, not included. It also describes a board guide for sheet widths beyond the fence’s reach. Battery and charger are separate for this selection; the kit pictured on the same page has different contents.FX2141 operator manual rip fence and board guide · turn1809view1 PDFpage19 lines937-954
The manual identifies FT211 as an optional rip fence, not included. It also describes a board guide for sheet widths beyond the fence’s reach. Battery and charger are separate for this selection; the kit pictured on the same page has different contents.Checked October 3, 2026
- RYOBI PBLCS302B: RYOBI suits existing 18V ONE+ users who want a 7-1/4-inch saw with a 0–56° bevel range. Detents cover 0°, 15°, 22.5°, 30°, 45° and 56°. This is the current PBLCS302B, distinct from the discontinued PBLCS300B.
Exact US model and specified package. Square means blade perpendicular to shoe, 0° bevel or 90° blade-to-shoe. Maximum cut depths are angle-specific maker statements, not measured cutting performance. Dust connections, blowers, brakes and lights do not establish tested capture, accuracy or safety outcomes. Follow the exact saw, blade, guide and material instructions. Do not assume track-system or cross-brand battery compatibility.
PBLCS302B ONE+ HP GEN II circular saw · turn1807view0 lines76-145
RYOBI suits existing 18V ONE+ users who want a 7-1/4-inch saw with a 0–56° bevel range. Detents cover 0°, 15°, 22.5°, 30°, 45° and 56°. This is the current PBLCS302B, distinct from the discontinued PBLCS300B.PBLCS302 operator manual · turn1808view0 PDFpage5 lines439-441;turn1809view2 PDFpage8 lines681-698
RYOBI suits existing 18V ONE+ users who want a 7-1/4-inch saw with a 0–56° bevel range. Detents cover 0°, 15°, 22.5°, 30°, 45° and 56°. This is the current PBLCS302B, distinct from the discontinued PBLCS300B.Checked October 3, 2026
- RYOBI PBLCS302B: The maker page and manual agree on 2-9/16-inch maximum square-cut depth. They differ at 45°: the page states 1-27/32 inches and the manual 1-13/16 inches. Confirm the exact 45° capacity before selecting it for a close-fitting bevel cut.
Exact US model and specified package. Square means blade perpendicular to shoe, 0° bevel or 90° blade-to-shoe. Maximum cut depths are angle-specific maker statements, not measured cutting performance. Dust connections, blowers, brakes and lights do not establish tested capture, accuracy or safety outcomes. Follow the exact saw, blade, guide and material instructions. Do not assume track-system or cross-brand battery compatibility.
PBLCS302B ONE+ HP GEN II circular saw · turn1807view0 lines76-145
The maker page and manual agree on 2-9/16-inch maximum square-cut depth. They differ at 45°: the page states 1-27/32 inches and the manual 1-13/16 inches. Confirm the exact 45° capacity before selecting it for a close-fitting bevel cut.PBLCS302 operator manual · turn1808view0 PDFpage5 lines439-441;turn1809view2 PDFpage8 lines681-698
The maker page and manual agree on 2-9/16-inch maximum square-cut depth. They differ at 45°: the page states 1-27/32 inches and the manual 1-13/16 inches. Confirm the exact 45° capacity before selecting it for a close-fitting bevel cut.Checked October 3, 2026
- RYOBI PBLCS302B: Its vacuum port includes an adapter for 1-1/4 to 1-7/8-inch hoses. A pommel handle and rafter hook accompany the controls; the manual describes clamped-straightedge guidance. Battery, charger and extractor are separate. Do not interpret the connection as proof of a capture rate.
Exact US model and specified package. Square means blade perpendicular to shoe, 0° bevel or 90° blade-to-shoe. Maximum cut depths are angle-specific maker statements, not measured cutting performance. Dust connections, blowers, brakes and lights do not establish tested capture, accuracy or safety outcomes. Follow the exact saw, blade, guide and material instructions. Do not assume track-system or cross-brand battery compatibility.
PBLCS302B ONE+ HP GEN II circular saw · turn1807view0 lines76-145
Its vacuum port includes an adapter for 1-1/4 to 1-7/8-inch hoses. A pommel handle and rafter hook accompany the controls; the manual describes clamped-straightedge guidance. Battery, charger and extractor are separate. Do not interpret the connection as proof of a capture rate.PBLCS302 operator manual · turn1808view0 PDFpage5 lines439-441;turn1809view2 PDFpage8 lines681-698
Its vacuum port includes an adapter for 1-1/4 to 1-7/8-inch hoses. A pommel handle and rafter hook accompany the controls; the manual describes clamped-straightedge guidance. Battery, charger and extractor are separate. Do not interpret the connection as proof of a capture rate.Checked October 3, 2026
- RIDGID R8658K: R8658K suits buyers who prefer a rear handle and blade on the left. This kit includes the R8658 saw, an 8.0Ah MAX Output EXP battery, rapid charger, blade, wrench and vacuum attachment. It is compatible with RIDGID 18V batteries.
Exact US model and specified package. Square means blade perpendicular to shoe, 0° bevel or 90° blade-to-shoe. Maximum cut depths are angle-specific maker statements, not measured cutting performance. Dust connections, blowers, brakes and lights do not establish tested capture, accuracy or safety outcomes. Follow the exact saw, blade, guide and material instructions. Do not assume track-system or cross-brand battery compatibility.
R8658K rear-handle circular saw kit · turn1806view2 lines149-196
R8658K suits buyers who prefer a rear handle and blade on the left. This kit includes the R8658 saw, an 8.0Ah MAX Output EXP battery, rapid charger, blade, wrench and vacuum attachment. It is compatible with RIDGID 18V batteries.Checked October 3, 2026
- RIDGID R8658K: The 7-1/4-inch blade has listed maximum depths of 2-1/2 inches square and 1-7/8 inches at 45° bevel. Bevel capacity is 53°, and the features include an LED and electric brake. No faster-cutting or safety advantage is inferred.
Exact US model and specified package. Square means blade perpendicular to shoe, 0° bevel or 90° blade-to-shoe. Maximum cut depths are angle-specific maker statements, not measured cutting performance. Dust connections, blowers, brakes and lights do not establish tested capture, accuracy or safety outcomes. Follow the exact saw, blade, guide and material instructions. Do not assume track-system or cross-brand battery compatibility.
R8658K rear-handle circular saw kit · turn1806view2 lines149-196
The 7-1/4-inch blade has listed maximum depths of 2-1/2 inches square and 1-7/8 inches at 45° bevel. Bevel capacity is 53°, and the features include an LED and electric brake. No faster-cutting or safety advantage is inferred.Checked October 3, 2026
- RIDGID R8658K: A kit simplifies buying the power components, but the page’s 9.5lb product-weight field does not establish complete kit or assembled weight. Check handling with the supplied pack. A compatible guiding accessory was not established here; verify your guiding setup separately rather than assuming a rail or fence is included.
Exact US model and specified package. Square means blade perpendicular to shoe, 0° bevel or 90° blade-to-shoe. Maximum cut depths are angle-specific maker statements, not measured cutting performance. Dust connections, blowers, brakes and lights do not establish tested capture, accuracy or safety outcomes. Follow the exact saw, blade, guide and material instructions. Do not assume track-system or cross-brand battery compatibility.
R8658K rear-handle circular saw kit · turn1806view2 lines149-196
A kit simplifies buying the power components, but the page’s 9.5lb product-weight field does not establish complete kit or assembled weight. Check handling with the supplied pack. A compatible guiding accessory was not established here; verify your guiding setup separately rather than assuming a rail or fence is included.Checked October 3, 2026
- Metabo HPT C7SB3: C7SB3 suits a corded setup where a one-piece aluminum base and front and side scales matter. The selected saw includes a 7-1/4-inch blade, bag and hex wrench. Its 15A motor has a listed 6,000 RPM no-load speed.
Exact US model and specified package. Square means blade perpendicular to shoe, 0° bevel or 90° blade-to-shoe. Maximum cut depths are angle-specific maker statements, not measured cutting performance. Dust connections, blowers, brakes and lights do not establish tested capture, accuracy or safety outcomes. Follow the exact saw, blade, guide and material instructions. Do not assume track-system or cross-brand battery compatibility.
C7SB3 corded circular saw · turn1808view1 lines128-170
C7SB3 suits a corded setup where a one-piece aluminum base and front and side scales matter. The selected saw includes a 7-1/4-inch blade, bag and hex wrench. Its 15A motor has a listed 6,000 RPM no-load speed.Checked October 3, 2026
- Metabo HPT C7SB3: Official maximum depths are 2-7/16 inches square and 1-7/8 inches at 45° bevel. Bevel travel reaches 55°. The maker lists Rip Fence Guide 302691, Wing Bolt 302697 and Lock Spring 947859 as optional accessories.
Exact US model and specified package. Square means blade perpendicular to shoe, 0° bevel or 90° blade-to-shoe. Maximum cut depths are angle-specific maker statements, not measured cutting performance. Dust connections, blowers, brakes and lights do not establish tested capture, accuracy or safety outcomes. Follow the exact saw, blade, guide and material instructions. Do not assume track-system or cross-brand battery compatibility.
C7SB3 corded circular saw · turn1808view1 lines128-170
Official maximum depths are 2-7/16 inches square and 1-7/8 inches at 45° bevel. Bevel travel reaches 55°. The maker lists Rip Fence Guide 302691, Wing Bolt 302697 and Lock Spring 947859 as optional accessories.Checked October 3, 2026
- Metabo HPT C7SB3: A dust blower addresses the cut line, while the specification table explicitly lists no light, laser or electric brake. Choose it for the base and corded package, and buy the exact guidance parts needed. Extractor compatibility was not established in the retained details.
Exact US model and specified package. Square means blade perpendicular to shoe, 0° bevel or 90° blade-to-shoe. Maximum cut depths are angle-specific maker statements, not measured cutting performance. Dust connections, blowers, brakes and lights do not establish tested capture, accuracy or safety outcomes. Follow the exact saw, blade, guide and material instructions. Do not assume track-system or cross-brand battery compatibility.
C7SB3 corded circular saw · turn1808view1 lines128-170
A dust blower addresses the cut line, while the specification table explicitly lists no light, laser or electric brake. Choose it for the base and corded package, and buy the exact guidance parts needed. Extractor compatibility was not established in the retained details.Checked October 3, 2026
- SKIL 5280-01: SKIL suits buyers who want a single-beam laser and wide footplate in a corded package. It includes a 7-1/4-inch 24-tooth blade, wrench and carrying bag. The 15A motor is listed at up to 5,300 RPM.
Exact US model and specified package. Square means blade perpendicular to shoe, 0° bevel or 90° blade-to-shoe. Maximum cut depths are angle-specific maker statements, not measured cutting performance. Dust connections, blowers, brakes and lights do not establish tested capture, accuracy or safety outcomes. Follow the exact saw, blade, guide and material instructions. Do not assume track-system or cross-brand battery compatibility.
5280-01 corded circular saw with laser · turn1802view2 lines230-265
SKIL suits buyers who want a single-beam laser and wide footplate in a corded package. It includes a 7-1/4-inch 24-tooth blade, wrench and carrying bag. The 15A motor is listed at up to 5,300 RPM.Checked October 3, 2026
- SKIL 5280-01: SKIL states maximum depths of 2-7/16 inches square and 1-15/16 inches at 45° bevel, with 51° bevel travel and a 45° stop. Treat the laser as an alignment cue and confirm the setup rather than assuming a measured accuracy guarantee.
Exact US model and specified package. Square means blade perpendicular to shoe, 0° bevel or 90° blade-to-shoe. Maximum cut depths are angle-specific maker statements, not measured cutting performance. Dust connections, blowers, brakes and lights do not establish tested capture, accuracy or safety outcomes. Follow the exact saw, blade, guide and material instructions. Do not assume track-system or cross-brand battery compatibility.
5280-01 corded circular saw with laser · turn1802view2 lines230-265
SKIL states maximum depths of 2-7/16 inches square and 1-15/16 inches at 45° bevel, with 51° bevel travel and a 45° stop. Treat the laser as an alignment cue and confirm the setup rather than assuming a measured accuracy guarantee.Checked October 3, 2026
- SKIL 5280-01: A rear depth-adjustment lever, spindle lock and on-tool wrench storage support setup. Its integrated dust blower moves sawdust away from the cut line. Choose it for its corded package and alignment features; an extractor connection was not established in the retained maker details.
Exact US model and specified package. Square means blade perpendicular to shoe, 0° bevel or 90° blade-to-shoe. Maximum cut depths are angle-specific maker statements, not measured cutting performance. Dust connections, blowers, brakes and lights do not establish tested capture, accuracy or safety outcomes. Follow the exact saw, blade, guide and material instructions. Do not assume track-system or cross-brand battery compatibility.
5280-01 corded circular saw with laser · turn1802view2 lines230-265
A rear depth-adjustment lever, spindle lock and on-tool wrench storage support setup. Its integrated dust blower moves sawdust away from the cut line. Choose it for its corded package and alignment features; an extractor connection was not established in the retained maker details.Checked October 3, 2026