Our top 10, at a glance.

Choose a digital angle tool for measuring trim corners, transferring angles or setting saw bevels, distinguishing hinged protractors from inclination gauges.

  1. #1Bosch GAM 220 MFBosch GAM 220 MF
  2. #2Klein Tools 935DAFKlein Tools 935DAF
  3. #3STABILA TECH 700 DA 18-inchSTABILA TECH 700 DA 18-inch
  4. #4Wixey WR412 Digital ProtractorWixey WR412 Digital Protractor
  5. #5General Tools ANGLE-IZER 822General Tools ANGLE-IZER 822
  6. #6Wixey WR300 Type 2Wixey WR300 Type 2
  7. #7Klein Tools 935DAGKlein Tools 935DAG
  8. #8Milwaukee Digital Angle Gauge 48-22-5602Milwaukee Digital Angle Gauge 48-22-5602
  9. #9SOLA GO! SMARTSOLA GO! SMART
  10. #10Johnson Level 1886-0000Johnson Level 1886-0000

All 10 picks, in order.

  1. #1

    Bosch GAM 220 MF

    Bosch GAM 220 MF

    Compound-miter calculations and angle memory

    Why it fits

    • GAM 220 MF leads for trim work that needs more than an angle reading. Bosch provides simple- and compound-miter calculation modes, stored measurements and a mechanical leg lock. The hinged body measures 0–220°, with stated angle accuracy of ±0.1° and a 0.1° indication step in the manual. Its illuminated display flips for reading in different orientations. The package includes an extension, case and four AA batteries. The 17.6-inch body is less convenient in a confined corner than a small ruler tool; use the manual’s correct inputs for compound cuts. [1] [2] [3]

    Before you choose

    • Large body and calculation inputs add handling compared with a pocket protractor. [1] [2] [3]

    Check before buying:

    • Large body and calculation inputs add handling compared with a pocket protractor.

    Model: US GAM220MF / 0601076610 · One selected physical instrument; named model/version only, not alternate sizes or packages. · US

    Check current details at Bosch ↗

  2. #2

    Klein Tools 935DAF

    Klein Tools 935DAF

    A compact hinged tool for simple miters

    Why it fits

    • 935DAF combines inside/outside angle measurement, ruler edges and a simple-miter calculator. It suits buyers who need a compact corner-measuring tool rather than Bosch’s compound-cut workflow. Klein states ±0.2° accuracy and an 8.5-inch overall length. An illuminated display, etched metal rules and a wide knob support reading and locking the measured angle. It uses one AAA battery, included, and carries an IP54 rating. The listed simple-miter calculation is not a documented compound-crown calculator; check the relevant saw setting before cutting. [4] [5] [6]

    Before you choose

    • Choose another workflow if automatic compound-crown calculations are essential. [4] [5] [6]

    Check before buying:

    • Choose another workflow if automatic compound-crown calculations are essential.

    Model: 935DAF digital angle finder · One selected physical instrument; named model/version only, not alternate sizes or packages. · US

    Check current details at Klein Tools ↗

  3. #3

    STABILA TECH 700 DA 18-inch

    STABILA TECH 700 DA 18-inch

    A locking bevel gauge with wide contact edges

    Why it fits

    • TECH 700 DA combines a hinged angle finder, spirit level and locking bevel gauge. Its wide contact edges and physical LOCK mechanism suit measuring and transferring an angle to trim stock. STABILA specifies a 0–270° range and ±0.1° electronic angle accuracy. The lit display has REF, HOLD and angle-halving functions, alongside horizontal and vertical vials. The manufacturer manual specifies two AA batteries and IP54 protection. It describes checking for dirt before zero-position calibration. This is the shorter 18-inch US listing, not the 32-inch model. [7] [8] [9]

    Before you choose

    • Its long contact body needs room; angle halving is not Bosch’s compound-miter calculation. [7] [8] [9]

    Check before buying:

    • Its long contact body needs room; angle halving is not Bosch’s compound-miter calculation.

    Model: US 39018; 18-inch / 45 cm TECH 700 DA · One selected physical instrument; named model/version only, not alternate sizes or packages. · US

    Check current details at STABILA ↗

  4. #4

    Wixey WR412 Digital Protractor

    Wixey WR412 Digital Protractor

    Long magnetic contact edges for trim layout

    Why it fits

    • WR412 is the longer-legged choice when a short ruler does not span the contact area you need. Wixey identifies this 12-inch model for trim work and crown molding. The manual specifies ±180° range and 0.1° resolution, with ±0.1° accuracy and repeatability. It measures angles in any plane, has magnets along the blade edges and can tighten the blades to retain an angle. Its Set Miter function calculates a miter setting; the device takes a CR2032 battery. The listed closed length is 13 inches. Do not assume this simple-miter workflow computes every compound-crown setup. [10] [11] [12]

    Before you choose

    • Longer legs help contact but need clearance; keep simple and compound settings distinct. [10] [11] [12]

    Check before buying:

    • Longer legs help contact but need clearance; keep simple and compound settings distinct.

    Model: WR412; 12-inch Set Miter model · One selected physical instrument; named model/version only, not alternate sizes or packages. · US

    Check current details at Wixey ↗

  5. #5

    General Tools ANGLE-IZER 822

    General Tools ANGLE-IZER 822

    A short stainless ruler with reverse-angle mode

    Why it fits

    • ANGLE-IZER 822 is the compact ruler option for inside, outside and reverse angles. Its hinge swings through a stated 0–360° range and can be zeroed at any point. The maker separates 0.1° display resolution from ±0.3° accuracy. Stainless rules, a large LCD, lock mode and reverse-angle mode support basic measurement and layout. It takes an included CR2032 battery. The product is named five-inch while the specifications list seven-inch leg dimensions; confirm usable contact length if space is tight. No automatic miter calculator is documented on this page. [13] [14] [15]

    Before you choose

    • Confirm usable ruler length; finer display steps do not make its stated accuracy ±0.1°. [13] [14] [15]

    Check before buying:

    • Confirm usable ruler length; finer display steps do not make its stated accuracy ±0.1°.

    Model: 822; nominal 5-inch digital angle finder · One selected physical instrument; named model/version only, not alternate sizes or packages. · US

    Check current details at General Tools ↗

  6. #6

    Wixey WR300 Type 2

    Wixey WR300 Type 2

    A simple magnetic saw-bevel reference

    Why it fits

    • WR300 Type 2 suits checking a saw’s bevel relative to its table. Set a reference with ZERO, then use the base magnets on a suitable ferrous surface as directed by the maker. Wixey lists ±180° range, 0.1° resolution, ±0.2° accuracy and ±0.1° repeatability. The compact backlit gauge uses one AAA battery. Type 2 is distinct from the discontinued CR2032-powered Type 1. This inclination gauge does not replace hinged arms for measuring the opening between two vertical walls. [16] [17] [18]

    Before you choose

    • Check the Type 2 label; do not apply the old Type 1 accuracy or battery specifications. [16] [17] [18]

    Check before buying:

    • Check the Type 2 label; do not apply the old Type 1 accuracy or battery specifications.

    Model: WR300 Type 2 with backlight; not discontinued Type 1 · One selected physical instrument; named model/version only, not alternate sizes or packages. · US

    Check current details at Wixey ↗

  7. #7

    Klein Tools 935DAG

    Klein Tools 935DAG

    Dual ranges with a reversible contrast display

    Why it fits

    • 935DAG offers 0–90° and 0–180° ranges, relative zero and a magnetic base. It is the cube-style choice for buyers wanting a reverse-contrast display and perimeter grooves. The display rotates when inverted. Klein states ±0.1° accuracy from 0–1°, 89–91° and 179–180°, with ±0.2° elsewhere; that wider tolerance matters for a 45° bevel. The IP42-rated package includes two AAA batteries and a soft case. A relative-zero reading depends on the reference surface; this tool measures inclination rather than directly spanning a wall corner. [19] [20] [21]

    Before you choose

    • The ±0.1° figure does not apply throughout the range. [19] [20] [21]

    Check before buying:

    • The ±0.1° figure does not apply throughout the range.

    Model: 935DAG digital angle gauge and level · One selected physical instrument; named model/version only, not alternate sizes or packages. · US

    Check current details at Klein Tools ↗

  8. #8

    Milwaukee Digital Angle Gauge 48-22-5602

    Milwaukee Digital Angle Gauge 48-22-5602

    Auto-rotating readings with angle-assist arrows

    Why it fits

    • 48-22-5602 combines 0–90° and 0–180° ranges with zero and hold functions. Its auto-rotating LCD and arrows toward the nearest 90° distinguish its readout workflow. The manual states ±0.1° at 0–1°, 89–90° and 179–180°, and ±0.2° elsewhere, using the magnetic base at 59–77°F. These are conditional maker limits, not our accuracy measurements. The IP42-rated gauge includes two AAA batteries and a case. Base magnets attach to suitable ferrous surfaces; the hold button freezes a reading, not the physical saw adjustment. [22] [23] [24]

    Before you choose

    • Do not generalize the tighter accuracy rating to every angle or temperature. [22] [23] [24]

    Check before buying:

    • Do not generalize the tighter accuracy rating to every angle or temperature.

    Model: 48-22-5602; US digital angle gauge · One selected physical instrument; named model/version only, not alternate sizes or packages. · US

    Check current details at Milwaukee Tool ↗

  9. #9

    SOLA GO! SMART

    SOLA GO! SMART

    Bluetooth readout and multiple slope units

    Why it fits

    • GO! SMART suits buyers who want inclination readings on a phone as well as the tool. Its Bluetooth connection works with SOLA Measures, and the tool offers degrees, percent, mm/m and in/ft. SOLA states 0.05° tolerance at 0° and 90°, and 0.2° between 1° and 89°. The display can show one or two decimal places; a second decimal is not a 0.01° accuracy claim. A rotating backlit display, magnetic V-groove base, HOLD and incremental modes accompany one included AA battery and belt case. Confirm current phone/app compatibility if remote viewing is the reason to buy. [25] [26] [27]

    Before you choose

    • App setup adds a dependency, and the tighter cardinal-angle tolerance does not cover a 45° bevel. [25] [26] [27]

    Check before buying:

    • App setup adds a dependency, and the tighter cardinal-angle tolerance does not cover a 45° bevel.

    Model: GO! SMART; US-market 3.15-inch model · One selected physical instrument; named model/version only, not alternate sizes or packages. · US

    Check current details at SOLA ↗

  10. #10

    Johnson Level 1886-0000

    Johnson Level 1886-0000

    A two-button locator using one AAA battery

    Why it fits

    • 1886-0000 is the straightforward two-button magnetic locator. Johnson documents a 4 × 90° working range and zeroing against a first workpiece before reading a second. The backlit LCD inverts for overhead viewing. Its published resolution is 0.1°; the page lists ±0.1° accuracy at 0° and 90° and a separate ±0.2° figure, so confirm the complete limits for your setup. One AAA battery and a soft pouch are included. The manual says it powers up at the last stored zero point: verify that reference rather than assuming every startup gives a new absolute zero. [28] [29] [30]

    Before you choose

    • Check the remembered zero before use; no miter calculator or hinged contact arms are provided. [28] [29] [30]

    Check before buying:

    • Check the remembered zero before use; no miter calculator or hinged contact arms are provided.

    Model: 1886-0000; two-button magnetic digital angle locator · One selected physical instrument; named model/version only, not alternate sizes or packages. · US

    Check current details at Johnson Level & Tool ↗

The details, side by side.

Published specifications and features
What matters#1Bosch GAM 220 MF#2Klein Tools 935DAF#3STABILA TECH 700 DA 18-inch#4Wixey WR412 Digital Protractor#5General Tools ANGLE-IZER 822#6Wixey WR300 Type 2#7Klein Tools 935DAG#8Milwaukee Digital Angle Gauge 48-22-5602#9SOLA GO! SMART#10Johnson Level 1886-0000
WorkflowGAM 220 MF leads for trim work that needs more than an angle reading. Bosch provides simple- and compound-miter calculation modes, stored measurements and a mechanical leg lock. [1]935DAF combines inside/outside angle measurement, ruler edges and a simple-miter calculator. It suits buyers who need a compact corner-measuring tool rather than Bosch’s compound-cut workflow. [4]TECH 700 DA combines a hinged angle finder, spirit level and locking bevel gauge. Its wide contact edges and physical LOCK mechanism suit measuring and transferring an angle to trim stock. [7]WR412 is the longer-legged choice when a short ruler does not span the contact area you need. Wixey identifies this 12-inch model for trim work and crown molding. [10]ANGLE-IZER 822 is the compact ruler option for inside, outside and reverse angles. Its hinge swings through a stated 0–360° range and can be zeroed at any point. [13]WR300 Type 2 suits checking a saw’s bevel relative to its table. Set a reference with ZERO, then use the base magnets on a suitable ferrous surface as directed by the maker. [16]935DAG offers 0–90° and 0–180° ranges, relative zero and a magnetic base. It is the cube-style choice for buyers wanting a reverse-contrast display and perimeter grooves. [19]48-22-5602 combines 0–90° and 0–180° ranges with zero and hold functions. Its auto-rotating LCD and arrows toward the nearest 90° distinguish its readout workflow. [22]GO! SMART suits buyers who want inclination readings on a phone as well as the tool. Its Bluetooth connection works with SOLA Measures, and the tool offers degrees, percent, mm/m and in/ft. [25]1886-0000 is the straightforward two-button magnetic locator. Johnson documents a 4 × 90° working range and zeroing against a first workpiece before reading a second. [28]
Form factorThe hinged body measures 0–220°, with stated angle accuracy of ±0.1° and a 0.1° indication step in the manual. Its illuminated display flips for reading in different orientations. [2]Klein states ±0.2° accuracy and an 8.5-inch overall length. An illuminated display, etched metal rules and a wide knob support reading and locking the measured angle. [5]STABILA specifies a 0–270° range and ±0.1° electronic angle accuracy. The lit display has REF, HOLD and angle-halving functions, alongside horizontal and vertical vials. [8]The manual specifies ±180° range and 0.1° resolution, with ±0.1° accuracy and repeatability. It measures angles in any plane, has magnets along the blade edges and can tighten the blades to retain an angle. [11]The maker separates 0.1° display resolution from ±0.3° accuracy. Stainless rules, a large LCD, lock mode and reverse-angle mode support basic measurement and layout. [14]Wixey lists ±180° range, 0.1° resolution, ±0.2° accuracy and ±0.1° repeatability. The compact backlit gauge uses one AAA battery. [17]The display rotates when inverted. Klein states ±0.1° accuracy from 0–1°, 89–91° and 179–180°, with ±0.2° elsewhere; that wider tolerance matters for a 45° bevel. [20]The manual states ±0.1° at 0–1°, 89–90° and 179–180°, and ±0.2° elsewhere, using the magnetic base at 59–77°F. These are conditional maker limits, not our accuracy measurements. [23]SOLA states 0.05° tolerance at 0° and 90°, and 0.2° between 1° and 89°. The display can show one or two decimal places; a second decimal is not a 0.01° accuracy claim. [26]The backlit LCD inverts for overhead viewing. Its published resolution is 0.1°; the page lists ±0.1° accuracy at 0° and 90° and a separate ±0.2° figure, so confirm the complete limits for your setup. [29]
CompatibilityThe package includes an extension, case and four AA batteries. The 17.6-inch body is less convenient in a confined corner than a small ruler tool; use the manual’s correct inputs for compound cuts. [3]It uses one AAA battery, included, and carries an IP54 rating. The listed simple-miter calculation is not a documented compound-crown calculator; check the relevant saw setting before cutting. [6]The manufacturer manual specifies two AA batteries and IP54 protection. It describes checking for dirt before zero-position calibration. This is the shorter 18-inch US listing, not the 32-inch model. [9]Its Set Miter function calculates a miter setting; the device takes a CR2032 battery. The listed closed length is 13 inches. Do not assume this simple-miter workflow computes every compound-crown setup. [12]It takes an included CR2032 battery. The product is named five-inch while the specifications list seven-inch leg dimensions; confirm usable contact length if space is tight. No automatic miter calculator is documented on this page. [15]Type 2 is distinct from the discontinued CR2032-powered Type 1. This inclination gauge does not replace hinged arms for measuring the opening between two vertical walls. [18]The IP42-rated package includes two AAA batteries and a soft case. A relative-zero reading depends on the reference surface; this tool measures inclination rather than directly spanning a wall corner. [21]The IP42-rated gauge includes two AAA batteries and a case. Base magnets attach to suitable ferrous surfaces; the hold button freezes a reading, not the physical saw adjustment. [24]A rotating backlit display, magnetic V-groove base, HOLD and incremental modes accompany one included AA battery and belt case. Confirm current phone/app compatibility if remote viewing is the reason to buy. [27]One AAA battery and a soft pouch are included. The manual says it powers up at the last stored zero point: verify that reference rather than assuming every startup gives a new absolute zero. [30]

Measure the corner or set the bevel

Use hinged contact arms to measure the opening between trim surfaces. Bosch offers simple and compound calculations; Klein 935DAF supplies a simple-miter workflow; STABILA locks and halves angles; Wixey WR412 uses its Set Miter sequence. A small magnetic inclination gauge serves a different job: establishing a bevel relative to a reference surface. [1] [4] [8] [12] [16]

Clean contact and the reference zero matter. Johnson starts with the previous zero; Wixey has you establish a reference before transferring the gauge. The Wixey protractor manual directs users to turn off and unplug power tools before measuring. Follow the instrument and saw manuals rather than treating a digital reading as a finished-joint guarantee. [30] [16] [12]

Read the tolerance, not just the last decimal

General 822 displays 0.1° steps but states ±0.3° accuracy. Current Wixey WR300 Type 2 states ±0.2° accuracy and ±0.1° repeatability, while the discontinued Type 1 has different specifications. SOLA’s second decimal does not make its measurement tolerance 0.01°. Check the exact version instead of comparing display digits alone. [14] [17] [18] [26]

Klein 935DAG and Milwaukee publish tighter tolerances near particular cardinal angles than elsewhere. Milwaukee also states a temperature band and magnetic-base condition. These figures describe maker limits, not our measured ranking. For a 45° trim bevel, use the applicable tolerance rather than the tighter headline number. [20] [23]

How we compared.

Source-based comparison of manufacturer pages and selected manuals read October 22, 2026. Noelle Howe’s Pro Tool Reviews feature overview highlights the Klein 935DAF’s simple-miter calculation and wide locking knob; this informed its compact-tool role, not a tested superiority claim. Bosch leads for compound-miter calculation and stored-angle workflow. Hinged tools measure between contact arms; magnetic inclination gauges support bevel setup and are not interchangeable with corner protractors. We have not tested accuracy or joint fit. Ranking is independent of commission.

How we choose

Sources

Official product documentation, reviewed October 22, 2026.

Bosch GAM 220 MF official product details ↗

Bosch · US · Read October 22, 2026

Klein Tools 935DAF official product details ↗

Klein Tools · US · Read October 22, 2026

STABILA TECH 700 DA 18-inch official product details ↗

STABILA · US · Read October 22, 2026

General Tools ANGLE-IZER 822 official product details ↗

General Tools · US · Read October 22, 2026

Wixey WR300 Type 2 official product details ↗

Wixey · US · Read October 22, 2026

Klein Tools 935DAG official product details ↗

Klein Tools · US · Read October 22, 2026

SOLA GO! SMART official product details ↗

SOLA · US · Read October 22, 2026

Johnson Level 1886-0000 official product details ↗

Johnson Level & Tool · US · Read October 22, 2026

Bosch GAM220MF instructions ↗

Bosch · US · Read October 22, 2026

Wixey WR412/WR418 instructions ↗

Wixey · US · Read October 22, 2026

Milwaukee 48-22-5602 instructions ↗

Milwaukee Tool · US · Read October 22, 2026

STABILA TECH700DA manual ↗

STABILA · US · Read October 22, 2026

SOLA GO!SMART US operating instructions ↗

SOLA · US · Read October 22, 2026

Johnson1886-0000 instructions ↗

Johnson Level & Tool · US · Read October 22, 2026

STABILA39018 US model identification ↗

FastoolNow · US · Read October 22, 2026

Klein Digital Angle Finder ↗

Pro Tool Reviews / Noelle Howe · US · Read October 22, 2026

Detailed source notes
  1. Bosch GAM 220 MF: GAM 220 MF leads for trim work that needs more than an angle reading. Bosch provides simple- and compound-miter calculation modes, stored measurements and a mechanical leg lock.

    Selected exact US model/version. Accuracy, resolution and repeatability are different; numerical ratings retain maker conditions. Relative zeroing is not an independent accuracy calibration. Hinged corner tools differ from inclination gauges. Confirm clean contact surfaces, orientation, battery and manual; no hands-on or perfect-joint outcome is claimed.

    Bosch GAM 220 MF official product details · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    GAM 220 MF leads for trim work that needs more than an angle reading. Bosch provides simple- and compound-miter calculation modes, stored measurements and a mechanical leg lock.

    Bosch GAM220MF instructions · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    GAM 220 MF leads for trim work that needs more than an angle reading. Bosch provides simple- and compound-miter calculation modes, stored measurements and a mechanical leg lock.

    Checked October 22, 2026

  2. Bosch GAM 220 MF: The hinged body measures 0–220°, with stated angle accuracy of ±0.1° and a 0.1° indication step in the manual. Its illuminated display flips for reading in different orientations.

    Selected exact US model/version. Accuracy, resolution and repeatability are different; numerical ratings retain maker conditions. Relative zeroing is not an independent accuracy calibration. Hinged corner tools differ from inclination gauges. Confirm clean contact surfaces, orientation, battery and manual; no hands-on or perfect-joint outcome is claimed.

    Bosch GAM 220 MF official product details · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    The hinged body measures 0–220°, with stated angle accuracy of ±0.1° and a 0.1° indication step in the manual. Its illuminated display flips for reading in different orientations.

    Bosch GAM220MF instructions · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    The hinged body measures 0–220°, with stated angle accuracy of ±0.1° and a 0.1° indication step in the manual. Its illuminated display flips for reading in different orientations.

    Checked October 22, 2026

  3. Bosch GAM 220 MF: The package includes an extension, case and four AA batteries. The 17.6-inch body is less convenient in a confined corner than a small ruler tool; use the manual’s correct inputs for compound cuts.

    Selected exact US model/version. Accuracy, resolution and repeatability are different; numerical ratings retain maker conditions. Relative zeroing is not an independent accuracy calibration. Hinged corner tools differ from inclination gauges. Confirm clean contact surfaces, orientation, battery and manual; no hands-on or perfect-joint outcome is claimed.

    Bosch GAM 220 MF official product details · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    The package includes an extension, case and four AA batteries. The 17.6-inch body is less convenient in a confined corner than a small ruler tool; use the manual’s correct inputs for compound cuts.

    Bosch GAM220MF instructions · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    The package includes an extension, case and four AA batteries. The 17.6-inch body is less convenient in a confined corner than a small ruler tool; use the manual’s correct inputs for compound cuts.

    Checked October 22, 2026

  4. Klein Tools 935DAF: 935DAF combines inside/outside angle measurement, ruler edges and a simple-miter calculator. It suits buyers who need a compact corner-measuring tool rather than Bosch’s compound-cut workflow.

    Selected exact US model/version. Accuracy, resolution and repeatability are different; numerical ratings retain maker conditions. Relative zeroing is not an independent accuracy calibration. Hinged corner tools differ from inclination gauges. Confirm clean contact surfaces, orientation, battery and manual; no hands-on or perfect-joint outcome is claimed.

    Klein Tools 935DAF official product details · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    935DAF combines inside/outside angle measurement, ruler edges and a simple-miter calculator. It suits buyers who need a compact corner-measuring tool rather than Bosch’s compound-cut workflow.

    Checked October 22, 2026

  5. Klein Tools 935DAF: Klein states ±0.2° accuracy and an 8.5-inch overall length. An illuminated display, etched metal rules and a wide knob support reading and locking the measured angle.

    Selected exact US model/version. Accuracy, resolution and repeatability are different; numerical ratings retain maker conditions. Relative zeroing is not an independent accuracy calibration. Hinged corner tools differ from inclination gauges. Confirm clean contact surfaces, orientation, battery and manual; no hands-on or perfect-joint outcome is claimed.

    Klein Tools 935DAF official product details · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    Klein states ±0.2° accuracy and an 8.5-inch overall length. An illuminated display, etched metal rules and a wide knob support reading and locking the measured angle.

    Checked October 22, 2026

  6. Klein Tools 935DAF: It uses one AAA battery, included, and carries an IP54 rating. The listed simple-miter calculation is not a documented compound-crown calculator; check the relevant saw setting before cutting.

    Selected exact US model/version. Accuracy, resolution and repeatability are different; numerical ratings retain maker conditions. Relative zeroing is not an independent accuracy calibration. Hinged corner tools differ from inclination gauges. Confirm clean contact surfaces, orientation, battery and manual; no hands-on or perfect-joint outcome is claimed.

    Klein Tools 935DAF official product details · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    It uses one AAA battery, included, and carries an IP54 rating. The listed simple-miter calculation is not a documented compound-crown calculator; check the relevant saw setting before cutting.

    Checked October 22, 2026

  7. STABILA TECH 700 DA 18-inch: TECH 700 DA combines a hinged angle finder, spirit level and locking bevel gauge. Its wide contact edges and physical LOCK mechanism suit measuring and transferring an angle to trim stock.

    Selected exact US model/version. Accuracy, resolution and repeatability are different; numerical ratings retain maker conditions. Relative zeroing is not an independent accuracy calibration. Hinged corner tools differ from inclination gauges. Confirm clean contact surfaces, orientation, battery and manual; no hands-on or perfect-joint outcome is claimed.

    STABILA TECH 700 DA 18-inch official product details · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    TECH 700 DA combines a hinged angle finder, spirit level and locking bevel gauge. Its wide contact edges and physical LOCK mechanism suit measuring and transferring an angle to trim stock.

    STABILA TECH700DA manual · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    TECH 700 DA combines a hinged angle finder, spirit level and locking bevel gauge. Its wide contact edges and physical LOCK mechanism suit measuring and transferring an angle to trim stock.

    Checked October 22, 2026

  8. STABILA TECH 700 DA 18-inch: STABILA specifies a 0–270° range and ±0.1° electronic angle accuracy. The lit display has REF, HOLD and angle-halving functions, alongside horizontal and vertical vials.

    Selected exact US model/version. Accuracy, resolution and repeatability are different; numerical ratings retain maker conditions. Relative zeroing is not an independent accuracy calibration. Hinged corner tools differ from inclination gauges. Confirm clean contact surfaces, orientation, battery and manual; no hands-on or perfect-joint outcome is claimed.

    STABILA TECH 700 DA 18-inch official product details · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    STABILA specifies a 0–270° range and ±0.1° electronic angle accuracy. The lit display has REF, HOLD and angle-halving functions, alongside horizontal and vertical vials.

    STABILA TECH700DA manual · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    STABILA specifies a 0–270° range and ±0.1° electronic angle accuracy. The lit display has REF, HOLD and angle-halving functions, alongside horizontal and vertical vials.

    Checked October 22, 2026

  9. STABILA TECH 700 DA 18-inch: The manufacturer manual specifies two AA batteries and IP54 protection. It describes checking for dirt before zero-position calibration. This is the shorter 18-inch US listing, not the 32-inch model.

    Selected exact US model/version. Accuracy, resolution and repeatability are different; numerical ratings retain maker conditions. Relative zeroing is not an independent accuracy calibration. Hinged corner tools differ from inclination gauges. Confirm clean contact surfaces, orientation, battery and manual; no hands-on or perfect-joint outcome is claimed.

    STABILA TECH 700 DA 18-inch official product details · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    The manufacturer manual specifies two AA batteries and IP54 protection. It describes checking for dirt before zero-position calibration. This is the shorter 18-inch US listing, not the 32-inch model.

    STABILA TECH700DA manual · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    The manufacturer manual specifies two AA batteries and IP54 protection. It describes checking for dirt before zero-position calibration. This is the shorter 18-inch US listing, not the 32-inch model.

    Checked October 22, 2026

  10. Wixey WR412 Digital Protractor: WR412 is the longer-legged choice when a short ruler does not span the contact area you need. Wixey identifies this 12-inch model for trim work and crown molding.

    Selected exact US model/version. Accuracy, resolution and repeatability are different; numerical ratings retain maker conditions. Relative zeroing is not an independent accuracy calibration. Hinged corner tools differ from inclination gauges. Confirm clean contact surfaces, orientation, battery and manual; no hands-on or perfect-joint outcome is claimed.

    Wixey WR412 Digital Protractor official product details · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    WR412 is the longer-legged choice when a short ruler does not span the contact area you need. Wixey identifies this 12-inch model for trim work and crown molding.

    Wixey WR412/WR418 instructions · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    WR412 is the longer-legged choice when a short ruler does not span the contact area you need. Wixey identifies this 12-inch model for trim work and crown molding.

    Checked October 22, 2026

  11. Wixey WR412 Digital Protractor: The manual specifies ±180° range and 0.1° resolution, with ±0.1° accuracy and repeatability. It measures angles in any plane, has magnets along the blade edges and can tighten the blades to retain an angle.

    Selected exact US model/version. Accuracy, resolution and repeatability are different; numerical ratings retain maker conditions. Relative zeroing is not an independent accuracy calibration. Hinged corner tools differ from inclination gauges. Confirm clean contact surfaces, orientation, battery and manual; no hands-on or perfect-joint outcome is claimed.

    Wixey WR412 Digital Protractor official product details · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    The manual specifies ±180° range and 0.1° resolution, with ±0.1° accuracy and repeatability. It measures angles in any plane, has magnets along the blade edges and can tighten the blades to retain an angle.

    Wixey WR412/WR418 instructions · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    The manual specifies ±180° range and 0.1° resolution, with ±0.1° accuracy and repeatability. It measures angles in any plane, has magnets along the blade edges and can tighten the blades to retain an angle.

    Checked October 22, 2026

  12. Wixey WR412 Digital Protractor: Its Set Miter function calculates a miter setting; the device takes a CR2032 battery. The listed closed length is 13 inches. Do not assume this simple-miter workflow computes every compound-crown setup.

    Selected exact US model/version. Accuracy, resolution and repeatability are different; numerical ratings retain maker conditions. Relative zeroing is not an independent accuracy calibration. Hinged corner tools differ from inclination gauges. Confirm clean contact surfaces, orientation, battery and manual; no hands-on or perfect-joint outcome is claimed.

    Wixey WR412 Digital Protractor official product details · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    Its Set Miter function calculates a miter setting; the device takes a CR2032 battery. The listed closed length is 13 inches. Do not assume this simple-miter workflow computes every compound-crown setup.

    Wixey WR412/WR418 instructions · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    Its Set Miter function calculates a miter setting; the device takes a CR2032 battery. The listed closed length is 13 inches. Do not assume this simple-miter workflow computes every compound-crown setup.

    Checked October 22, 2026

  13. General Tools ANGLE-IZER 822: ANGLE-IZER 822 is the compact ruler option for inside, outside and reverse angles. Its hinge swings through a stated 0–360° range and can be zeroed at any point.

    Selected exact US model/version. Accuracy, resolution and repeatability are different; numerical ratings retain maker conditions. Relative zeroing is not an independent accuracy calibration. Hinged corner tools differ from inclination gauges. Confirm clean contact surfaces, orientation, battery and manual; no hands-on or perfect-joint outcome is claimed.

    General Tools ANGLE-IZER 822 official product details · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    ANGLE-IZER 822 is the compact ruler option for inside, outside and reverse angles. Its hinge swings through a stated 0–360° range and can be zeroed at any point.

    Checked October 22, 2026

  14. General Tools ANGLE-IZER 822: The maker separates 0.1° display resolution from ±0.3° accuracy. Stainless rules, a large LCD, lock mode and reverse-angle mode support basic measurement and layout.

    Selected exact US model/version. Accuracy, resolution and repeatability are different; numerical ratings retain maker conditions. Relative zeroing is not an independent accuracy calibration. Hinged corner tools differ from inclination gauges. Confirm clean contact surfaces, orientation, battery and manual; no hands-on or perfect-joint outcome is claimed.

    General Tools ANGLE-IZER 822 official product details · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    The maker separates 0.1° display resolution from ±0.3° accuracy. Stainless rules, a large LCD, lock mode and reverse-angle mode support basic measurement and layout.

    Checked October 22, 2026

  15. General Tools ANGLE-IZER 822: It takes an included CR2032 battery. The product is named five-inch while the specifications list seven-inch leg dimensions; confirm usable contact length if space is tight. No automatic miter calculator is documented on this page.

    Selected exact US model/version. Accuracy, resolution and repeatability are different; numerical ratings retain maker conditions. Relative zeroing is not an independent accuracy calibration. Hinged corner tools differ from inclination gauges. Confirm clean contact surfaces, orientation, battery and manual; no hands-on or perfect-joint outcome is claimed.

    General Tools ANGLE-IZER 822 official product details · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    It takes an included CR2032 battery. The product is named five-inch while the specifications list seven-inch leg dimensions; confirm usable contact length if space is tight. No automatic miter calculator is documented on this page.

    Checked October 22, 2026

  16. Wixey WR300 Type 2: WR300 Type 2 suits checking a saw’s bevel relative to its table. Set a reference with ZERO, then use the base magnets on a suitable ferrous surface as directed by the maker.

    Selected exact US model/version. Accuracy, resolution and repeatability are different; numerical ratings retain maker conditions. Relative zeroing is not an independent accuracy calibration. Hinged corner tools differ from inclination gauges. Confirm clean contact surfaces, orientation, battery and manual; no hands-on or perfect-joint outcome is claimed.

    Wixey WR300 Type 2 official product details · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    WR300 Type 2 suits checking a saw’s bevel relative to its table. Set a reference with ZERO, then use the base magnets on a suitable ferrous surface as directed by the maker.

    Checked October 22, 2026

  17. Wixey WR300 Type 2: Wixey lists ±180° range, 0.1° resolution, ±0.2° accuracy and ±0.1° repeatability. The compact backlit gauge uses one AAA battery.

    Selected exact US model/version. Accuracy, resolution and repeatability are different; numerical ratings retain maker conditions. Relative zeroing is not an independent accuracy calibration. Hinged corner tools differ from inclination gauges. Confirm clean contact surfaces, orientation, battery and manual; no hands-on or perfect-joint outcome is claimed.

    Wixey WR300 Type 2 official product details · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    Wixey lists ±180° range, 0.1° resolution, ±0.2° accuracy and ±0.1° repeatability. The compact backlit gauge uses one AAA battery.

    Checked October 22, 2026

  18. Wixey WR300 Type 2: Type 2 is distinct from the discontinued CR2032-powered Type 1. This inclination gauge does not replace hinged arms for measuring the opening between two vertical walls.

    Selected exact US model/version. Accuracy, resolution and repeatability are different; numerical ratings retain maker conditions. Relative zeroing is not an independent accuracy calibration. Hinged corner tools differ from inclination gauges. Confirm clean contact surfaces, orientation, battery and manual; no hands-on or perfect-joint outcome is claimed.

    Wixey WR300 Type 2 official product details · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    Type 2 is distinct from the discontinued CR2032-powered Type 1. This inclination gauge does not replace hinged arms for measuring the opening between two vertical walls.

    Checked October 22, 2026

  19. Klein Tools 935DAG: 935DAG offers 0–90° and 0–180° ranges, relative zero and a magnetic base. It is the cube-style choice for buyers wanting a reverse-contrast display and perimeter grooves.

    Selected exact US model/version. Accuracy, resolution and repeatability are different; numerical ratings retain maker conditions. Relative zeroing is not an independent accuracy calibration. Hinged corner tools differ from inclination gauges. Confirm clean contact surfaces, orientation, battery and manual; no hands-on or perfect-joint outcome is claimed.

    Klein Tools 935DAG official product details · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    935DAG offers 0–90° and 0–180° ranges, relative zero and a magnetic base. It is the cube-style choice for buyers wanting a reverse-contrast display and perimeter grooves.

    Checked October 22, 2026

  20. Klein Tools 935DAG: The display rotates when inverted. Klein states ±0.1° accuracy from 0–1°, 89–91° and 179–180°, with ±0.2° elsewhere; that wider tolerance matters for a 45° bevel.

    Selected exact US model/version. Accuracy, resolution and repeatability are different; numerical ratings retain maker conditions. Relative zeroing is not an independent accuracy calibration. Hinged corner tools differ from inclination gauges. Confirm clean contact surfaces, orientation, battery and manual; no hands-on or perfect-joint outcome is claimed.

    Klein Tools 935DAG official product details · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    The display rotates when inverted. Klein states ±0.1° accuracy from 0–1°, 89–91° and 179–180°, with ±0.2° elsewhere; that wider tolerance matters for a 45° bevel.

    Checked October 22, 2026

  21. Klein Tools 935DAG: The IP42-rated package includes two AAA batteries and a soft case. A relative-zero reading depends on the reference surface; this tool measures inclination rather than directly spanning a wall corner.

    Selected exact US model/version. Accuracy, resolution and repeatability are different; numerical ratings retain maker conditions. Relative zeroing is not an independent accuracy calibration. Hinged corner tools differ from inclination gauges. Confirm clean contact surfaces, orientation, battery and manual; no hands-on or perfect-joint outcome is claimed.

    Klein Tools 935DAG official product details · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    The IP42-rated package includes two AAA batteries and a soft case. A relative-zero reading depends on the reference surface; this tool measures inclination rather than directly spanning a wall corner.

    Checked October 22, 2026

  22. Milwaukee Digital Angle Gauge 48-22-5602: 48-22-5602 combines 0–90° and 0–180° ranges with zero and hold functions. Its auto-rotating LCD and arrows toward the nearest 90° distinguish its readout workflow.

    Selected exact US model/version. Accuracy, resolution and repeatability are different; numerical ratings retain maker conditions. Relative zeroing is not an independent accuracy calibration. Hinged corner tools differ from inclination gauges. Confirm clean contact surfaces, orientation, battery and manual; no hands-on or perfect-joint outcome is claimed.

    Milwaukee Digital Angle Gauge 48-22-5602 official product details · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    48-22-5602 combines 0–90° and 0–180° ranges with zero and hold functions. Its auto-rotating LCD and arrows toward the nearest 90° distinguish its readout workflow.

    Milwaukee 48-22-5602 instructions · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    48-22-5602 combines 0–90° and 0–180° ranges with zero and hold functions. Its auto-rotating LCD and arrows toward the nearest 90° distinguish its readout workflow.

    Checked October 22, 2026

  23. Milwaukee Digital Angle Gauge 48-22-5602: The manual states ±0.1° at 0–1°, 89–90° and 179–180°, and ±0.2° elsewhere, using the magnetic base at 59–77°F. These are conditional maker limits, not our accuracy measurements.

    Selected exact US model/version. Accuracy, resolution and repeatability are different; numerical ratings retain maker conditions. Relative zeroing is not an independent accuracy calibration. Hinged corner tools differ from inclination gauges. Confirm clean contact surfaces, orientation, battery and manual; no hands-on or perfect-joint outcome is claimed.

    Milwaukee Digital Angle Gauge 48-22-5602 official product details · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    The manual states ±0.1° at 0–1°, 89–90° and 179–180°, and ±0.2° elsewhere, using the magnetic base at 59–77°F. These are conditional maker limits, not our accuracy measurements.

    Milwaukee 48-22-5602 instructions · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    The manual states ±0.1° at 0–1°, 89–90° and 179–180°, and ±0.2° elsewhere, using the magnetic base at 59–77°F. These are conditional maker limits, not our accuracy measurements.

    Checked October 22, 2026

  24. Milwaukee Digital Angle Gauge 48-22-5602: The IP42-rated gauge includes two AAA batteries and a case. Base magnets attach to suitable ferrous surfaces; the hold button freezes a reading, not the physical saw adjustment.

    Selected exact US model/version. Accuracy, resolution and repeatability are different; numerical ratings retain maker conditions. Relative zeroing is not an independent accuracy calibration. Hinged corner tools differ from inclination gauges. Confirm clean contact surfaces, orientation, battery and manual; no hands-on or perfect-joint outcome is claimed.

    Milwaukee Digital Angle Gauge 48-22-5602 official product details · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    The IP42-rated gauge includes two AAA batteries and a case. Base magnets attach to suitable ferrous surfaces; the hold button freezes a reading, not the physical saw adjustment.

    Milwaukee 48-22-5602 instructions · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    The IP42-rated gauge includes two AAA batteries and a case. Base magnets attach to suitable ferrous surfaces; the hold button freezes a reading, not the physical saw adjustment.

    Checked October 22, 2026

  25. SOLA GO! SMART: GO! SMART suits buyers who want inclination readings on a phone as well as the tool. Its Bluetooth connection works with SOLA Measures, and the tool offers degrees, percent, mm/m and in/ft.

    Selected exact US model/version. Accuracy, resolution and repeatability are different; numerical ratings retain maker conditions. Relative zeroing is not an independent accuracy calibration. Hinged corner tools differ from inclination gauges. Confirm clean contact surfaces, orientation, battery and manual; no hands-on or perfect-joint outcome is claimed.

    SOLA GO! SMART official product details · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    GO! SMART suits buyers who want inclination readings on a phone as well as the tool. Its Bluetooth connection works with SOLA Measures, and the tool offers degrees, percent, mm/m and in/ft.

    SOLA GO!SMART US operating instructions · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    GO! SMART suits buyers who want inclination readings on a phone as well as the tool. Its Bluetooth connection works with SOLA Measures, and the tool offers degrees, percent, mm/m and in/ft.

    Checked October 22, 2026

  26. SOLA GO! SMART: SOLA states 0.05° tolerance at 0° and 90°, and 0.2° between 1° and 89°. The display can show one or two decimal places; a second decimal is not a 0.01° accuracy claim.

    Selected exact US model/version. Accuracy, resolution and repeatability are different; numerical ratings retain maker conditions. Relative zeroing is not an independent accuracy calibration. Hinged corner tools differ from inclination gauges. Confirm clean contact surfaces, orientation, battery and manual; no hands-on or perfect-joint outcome is claimed.

    SOLA GO! SMART official product details · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    SOLA states 0.05° tolerance at 0° and 90°, and 0.2° between 1° and 89°. The display can show one or two decimal places; a second decimal is not a 0.01° accuracy claim.

    SOLA GO!SMART US operating instructions · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    SOLA states 0.05° tolerance at 0° and 90°, and 0.2° between 1° and 89°. The display can show one or two decimal places; a second decimal is not a 0.01° accuracy claim.

    Checked October 22, 2026

  27. SOLA GO! SMART: A rotating backlit display, magnetic V-groove base, HOLD and incremental modes accompany one included AA battery and belt case. Confirm current phone/app compatibility if remote viewing is the reason to buy.

    Selected exact US model/version. Accuracy, resolution and repeatability are different; numerical ratings retain maker conditions. Relative zeroing is not an independent accuracy calibration. Hinged corner tools differ from inclination gauges. Confirm clean contact surfaces, orientation, battery and manual; no hands-on or perfect-joint outcome is claimed.

    SOLA GO! SMART official product details · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    A rotating backlit display, magnetic V-groove base, HOLD and incremental modes accompany one included AA battery and belt case. Confirm current phone/app compatibility if remote viewing is the reason to buy.

    SOLA GO!SMART US operating instructions · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    A rotating backlit display, magnetic V-groove base, HOLD and incremental modes accompany one included AA battery and belt case. Confirm current phone/app compatibility if remote viewing is the reason to buy.

    Checked October 22, 2026

  28. Johnson Level 1886-0000: 1886-0000 is the straightforward two-button magnetic locator. Johnson documents a 4 × 90° working range and zeroing against a first workpiece before reading a second.

    Selected exact US model/version. Accuracy, resolution and repeatability are different; numerical ratings retain maker conditions. Relative zeroing is not an independent accuracy calibration. Hinged corner tools differ from inclination gauges. Confirm clean contact surfaces, orientation, battery and manual; no hands-on or perfect-joint outcome is claimed.

    Johnson Level 1886-0000 official product details · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    1886-0000 is the straightforward two-button magnetic locator. Johnson documents a 4 × 90° working range and zeroing against a first workpiece before reading a second.

    Johnson1886-0000 instructions · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    1886-0000 is the straightforward two-button magnetic locator. Johnson documents a 4 × 90° working range and zeroing against a first workpiece before reading a second.

    Checked October 22, 2026

  29. Johnson Level 1886-0000: The backlit LCD inverts for overhead viewing. Its published resolution is 0.1°; the page lists ±0.1° accuracy at 0° and 90° and a separate ±0.2° figure, so confirm the complete limits for your setup.

    Selected exact US model/version. Accuracy, resolution and repeatability are different; numerical ratings retain maker conditions. Relative zeroing is not an independent accuracy calibration. Hinged corner tools differ from inclination gauges. Confirm clean contact surfaces, orientation, battery and manual; no hands-on or perfect-joint outcome is claimed.

    Johnson Level 1886-0000 official product details · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    The backlit LCD inverts for overhead viewing. Its published resolution is 0.1°; the page lists ±0.1° accuracy at 0° and 90° and a separate ±0.2° figure, so confirm the complete limits for your setup.

    Johnson1886-0000 instructions · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    The backlit LCD inverts for overhead viewing. Its published resolution is 0.1°; the page lists ±0.1° accuracy at 0° and 90° and a separate ±0.2° figure, so confirm the complete limits for your setup.

    Checked October 22, 2026

  30. Johnson Level 1886-0000: One AAA battery and a soft pouch are included. The manual says it powers up at the last stored zero point: verify that reference rather than assuming every startup gives a new absolute zero.

    Selected exact US model/version. Accuracy, resolution and repeatability are different; numerical ratings retain maker conditions. Relative zeroing is not an independent accuracy calibration. Hinged corner tools differ from inclination gauges. Confirm clean contact surfaces, orientation, battery and manual; no hands-on or perfect-joint outcome is claimed.

    Johnson Level 1886-0000 official product details · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    One AAA battery and a soft pouch are included. The manual says it powers up at the last stored zero point: verify that reference rather than assuming every startup gives a new absolute zero.

    Johnson1886-0000 instructions · Actual product features/specification section; retained manual technical/operation pages as located in evidence note.
    One AAA battery and a soft pouch are included. The manual says it powers up at the last stored zero point: verify that reference rather than assuming every startup gives a new absolute zero.

    Checked October 22, 2026

Something changed? Help us correct the record.