Our top 10, at a glance.

Choose a physical heat gun for heat-shrink tubing and workshop projects by matching heat and airflow controls, nozzle options, power supply and bench layout.

  1. #1Wagner FURNO 500Best for a corded bench gun with twelve heat settings
  2. #2Makita LCD Heat Gun KitBest for a digital gun with four included nozzle shapes
  3. #3STEINEL HG 2320 EcoBest for programmable temperature and continuously variable airflow
  4. #4DEWALT LCD Heat GunBest for LCD controls with documented fan-stage ranges
  5. #5PORTER-CABLE 1500-Watt Heat GunBest for a temperature dial and an upright support stand
  6. #6WEN Variable-Temperature Heat GunBest for a dial with explicitly documented speed-dependent ranges
  7. #7Wagner HT400 Heat ToolBest for compact palm or pencil holding for small tasks
  8. #8DEWALT 20V MAX Cordless Heat GunBest for existing 20V MAX batteries and a lock-on trigger
  9. #9Milwaukee M18 Compact Heat GunBest for existing M18 batteries and a hanging hook
  10. #10RYOBI 18V ONE+ Heat GunBest for existing ONE+ batteries and two documented tips

All 10 picks, in order.

  1. #1

    Best for a corded bench gun with twelve heat settings

    Wagner FURNO 500

    A corded bench gun with twelve heat settings.

    Why it fits

    • Wagner lists twelve temperature settings from 150 to 1,200°F, LED push-button controls, two fan settings and cool-down mode. FURNO 500 is a corded 1,500 W design; its manual describes the low and high heat outputs as approximate. The package includes glass-protector and flare nozzles and an integrated stand; Wagner lists electric heat-shrink tubing among its applications. [1] [2] [3]

    Before you choose

    • The two included tips are not a dedicated wraparound tubing reflector. Check the appropriate FURNO accessory for your work. [1] [2] [3]

    Check before buying:

    • Air volume, measured outlet accuracy and performance on specific tubing are unverified.

    Model: 503063, FURNO 500 · 503063, FURNO 500 · US

    Check current details at Wagner ↗

  2. #2

    Best for a digital gun with four included nozzle shapes

    Makita LCD Heat Gun Kit

    A digital gun with four included nozzle shapes.

    Why it fits

    • Makita specifies LCD push-button temperature control from 122 to 1,202°F in 50°F increments. The AC-powered model has cooling, low and high switch positions; the maker lists heated air volumes of 10 and 17.6 CFM. The kit includes glass-protection, wide-slot, reflector and reduction nozzles plus a tool case; the gun has an integrated rear stand. [4] [5] [6]

    Before you choose

    • The display and 50°F steps describe its controls, not measured temperature at a tubing surface. [4] [5] [6]

    Check before buying:

    • The US page lists 2,000 W alongside 13 A; electrical-rating consistency is unresolved. Confirm the supplied nameplate and circuit requirements.

    Model: HG6530VK, US kit · HG6530VK, US kit · US

    Check current details at Makita ↗

  3. #3

    Best for programmable temperature and continuously variable airflow

    STEINEL HG 2320 Eco

    Programmable temperature and continuously variable airflow.

    Why it fits

    • STEINEL lists a 120–1,200°F range, continuously variable 4–13 CFM airflow, an LCD and four programmable settings. The US 110102124 data sheet specifies 120 V AC, 60 Hz, 1,600 W and a six-foot power cord. The Eco model lists a hanging ring, standard nozzle accessories and an e-mode that stops the heating element after a selectable 0–1,990 seconds; a control-button input resumes heating. [7] [8] [9]

    Before you choose

    • The Eco timer is a control feature, not evidence of quantified energy savings or permission to leave a hot tool unattended. [7] [8] [9]

    Check before buying:

    • Exact included nozzles, temperature calibration and performance on your tubing are unverified.

    Model: 110102124, US 120 V · 110102124, US 120 V · US

    Check current details at STEINEL ↗

  4. #4

    Best for LCD controls with documented fan-stage ranges

    DEWALT LCD Heat Gun

    Lcd controls with documented fan-stage ranges.

    Why it fits

    • DEWALT specifies 50°F LCD adjustment steps; its Type 10 D26960 manual lists low 150–750°F at 8.8 CFM and high 150–1,100°F at 17.7 CFM. D26960 is corded and has a kickstand, hanging ring and cord protector. The package lists cone and fishtail nozzles. The manual identifies the cone for shrink sleeving and limits operation to 60 minutes ON in a two-hour period. [10] [11] [12]

    Before you choose

    • Low and high fan settings have different temperature ceilings. Follow the documented duty limit rather than assuming unlimited operation from mains power. [10] [11] [12]

    Check before buying:

    • Accuracy at the workpiece and the current electrical nameplate rating are not established here.

    Model: D26960, Type 10 manual · D26960, Type 10 manual · US

    Check current details at DEWALT ↗

  5. #5

    Best for a temperature dial and an upright support stand

    PORTER-CABLE 1500-Watt Heat Gun

    A temperature dial and an upright support stand.

    Why it fits

    • PORTER-CABLE lists a variable-temperature dial and high/low fan selector; its manual says the switch changes fan speed and heat output together. The maker specifies 1,500 W, a two-pound body and a six-foot cord. The gun has an integrated upright support and hanging hook. The manual assigns the supplied nozzle set to PC1500HGA, not the selected PC1500HG. [13] [14] [15]

    Before you choose

    • Budget for model-compatible nozzles if needed; the pictured or manual-described accessory kit is not the selected gun-only package. [13] [14] [15]

    Check before buying:

    • Numeric temperature-stage ranges, airflow volumes and measured temperature repeatability are not established by the retained pages.

    Model: PC1500HG, gun-only package · PC1500HG, gun-only package · US

    Check current details at PORTER-CABLE ↗

  6. #6

    Best for a dial with explicitly documented speed-dependent ranges

    WEN Variable-Temperature Heat Gun

    A dial with explicitly documented speed-dependent ranges.

    Why it fits

    • The WEN manual specifies low-speed 122–842°F at 79 GPM and high-speed 194–1,112°F at 132 GPM, adjusted with a temperature dial. HG112V uses 120 V AC at 60 Hz; the maker lists 6.25 A low, 12.5 A high and a 1.30-pound weight. The manual identifies a flat back rest for cooling before storage and a two-speed power switch. [16] [17] [18]

    Before you choose

    • The lowest stated temperature is available in low speed, not across both airflow settings. Check nozzle fit separately. [16] [17] [18]

    Check before buying:

    • A model-specific accessory-nozzle list, calibration and heat-shrink results are unverified.

    Model: HG112V · HG112V · US

    Check current details at WEN ↗

  7. #7

    Best for compact palm or pencil holding for small tasks

    Wagner HT400 Heat Tool

    Compact palm or pencil holding for small tasks.

    Why it fits

    • Wagner lists an angled body with palm, pencil and hands-free positions and two heat settings: 450°F low and 680°F high. The manual linked on the model page specifies 110–120 V AC, 170 W low/350 W high and a six-foot cord; heat outputs are approximate. HT400 has a retractable stand; Wagner lists electrical wire shrink tubing among its uses and offers separate craft/electronics accessory bundles. [19] [20] [21]

    Before you choose

    • This is a two-setting tool; it does not offer the broad temperature and airflow adjustment of the higher-ranked bench models. [19] [20] [21]

    Check before buying:

    • Numeric airflow and exact included accessories for the gun-only package are unverified.

    Model: 503038, HT400 · 503038, HT400 · US

    Check current details at Wagner ↗

  8. #8

    Best for existing 20V MAX batteries and a lock-on trigger

    DEWALT 20V MAX Cordless Heat Gun

    Existing 20v max batteries and a lock-on trigger.

    Why it fits

    • DEWALT describes two heat settings and a maximum 990°F output measured on high after 340 seconds at 0.4 mm from the nozzle; its manual gives different preliminary/stage figures. The tool uses the 20V MAX battery system, nominally 18 V; the selected B package excludes battery and charger. The package includes hook and flat nozzles, lock-on/lock-off controls and an LED. Its manual limits use to 60 minutes ON within two hours. [22] [23] [24]

    Before you choose

    • The conditioned maximum is not an immediate workpiece temperature. The differing manual figures leave current outlet stages unresolved; do not select it for a tightly specified temperature target. [22] [23] [24]

    Check before buying:

    • Current numeric stage temperatures, workpiece heat distribution and runtime with your battery are unverified.

    Model: DCE530B, tool only · DCE530B, tool only · US

    Check current details at DEWALT ↗

  9. #9

    Best for existing M18 batteries and a hanging hook

    Milwaukee M18 Compact Heat Gun

    Existing m18 batteries and a hanging hook.

    Why it fits

    • Milwaukee’s operator manual rates 2688-20 at 875°F and 6 CFM and describes an on/off trigger rather than adjustable temperature stages. The manual specifies 18 V DC and M18 battery/charger types; the maker lists a 6.4-inch body length. The maker lists a guarded nozzle, ladder hook and LED; the manual identifies hook and air-reduction nozzles for heat shrinking. [25] [26] [27]

    Before you choose

    • The rated heat and airflow are fixed specifications, so choose a variable-control model if your task needs those adjustments. [25] [26] [27]

    Check before buying:

    • Exact included nozzles, battery/charger packing and runtime for the selected 2688-20 package need confirmation.

    Model: 2688-20 · 2688-20 · US

    Check current details at Milwaukee ↗

  10. #10

    Best for existing ONE+ batteries and two documented tips

    RYOBI 18V ONE+ Heat Gun

    Existing one+ batteries and two documented tips.

    Why it fits

    • RYOBI and its P3150 manual list a maximum temperature of 875°F and trigger-controlled operation. P3150 uses an 18 V ONE+ battery pack and has an LED work light. The manual lists concentrator and deflector nozzles in the package, identifying the deflector for shrink tubing; it requires cool nozzles for attachment changes. [28] [29] [30]

    Before you choose

    • The retained page and manual do not provide an adjustable heat-stage or fan-speed selector. Confirm the battery and charger package before buying. [28] [29] [30]

    Check before buying:

    • Airflow volume, battery/charger inclusion, measured outlet temperature and loaded runtime are unverified.

    Model: P3150 · P3150 · US

    Check current details at RYOBI ↗

The details, side by side.

Published specifications and features
What matters#1Wagner FURNO 500#2Makita LCD Heat Gun Kit#3STEINEL HG 2320 Eco#4DEWALT LCD Heat Gun#5PORTER-CABLE 1500-Watt Heat Gun#6WEN Variable-Temperature Heat Gun#7Wagner HT400 Heat Tool#8DEWALT 20V MAX Cordless Heat Gun#9Milwaukee M18 Compact Heat Gun#10RYOBI 18V ONE+ Heat Gun
WorkflowWagner lists twelve temperature settings from 150 to 1,200°F, LED push-button controls, two fan settings and cool-down mode. [1]Makita specifies LCD push-button temperature control from 122 to 1,202°F in 50°F increments. [4]STEINEL lists a 120–1,200°F range, continuously variable 4–13 CFM airflow, an LCD and four programmable settings. [7]DEWALT specifies 50°F LCD adjustment steps; its Type 10 D26960 manual lists low 150–750°F at 8.8 CFM and high 150–1,100°F at 17.7 CFM. [10]PORTER-CABLE lists a variable-temperature dial and high/low fan selector; its manual says the switch changes fan speed and heat output together. [13]The WEN manual specifies low-speed 122–842°F at 79 GPM and high-speed 194–1,112°F at 132 GPM, adjusted with a temperature dial. [16]Wagner lists an angled body with palm, pencil and hands-free positions and two heat settings: 450°F low and 680°F high. [19]DEWALT describes two heat settings and a maximum 990°F output measured on high after 340 seconds at 0.4 mm from the nozzle; its manual gives different preliminary/stage figures. [22]Milwaukee’s operator manual rates 2688-20 at 875°F and 6 CFM and describes an on/off trigger rather than adjustable temperature stages. [25]RYOBI and its P3150 manual list a maximum temperature of 875°F and trigger-controlled operation. [28]
Form factorFURNO 500 is a corded 1,500 W design; its manual describes the low and high heat outputs as approximate. [2]The AC-powered model has cooling, low and high switch positions; the maker lists heated air volumes of 10 and 17.6 CFM. [5]The US 110102124 data sheet specifies 120 V AC, 60 Hz, 1,600 W and a six-foot power cord. [8]D26960 is corded and has a kickstand, hanging ring and cord protector. [11]The maker specifies 1,500 W, a two-pound body and a six-foot cord. [14]HG112V uses 120 V AC at 60 Hz; the maker lists 6.25 A low, 12.5 A high and a 1.30-pound weight. [17]The manual linked on the model page specifies 110–120 V AC, 170 W low/350 W high and a six-foot cord; heat outputs are approximate. [20]The tool uses the 20V MAX battery system, nominally 18 V; the selected B package excludes battery and charger. [23]The manual specifies 18 V DC and M18 battery/charger types; the maker lists a 6.4-inch body length. [26]P3150 uses an 18 V ONE+ battery pack and has an LED work light. [29]
CompatibilityThe package includes glass-protector and flare nozzles and an integrated stand; Wagner lists electric heat-shrink tubing among its applications. [3]The kit includes glass-protection, wide-slot, reflector and reduction nozzles plus a tool case; the gun has an integrated rear stand. [6]The Eco model lists a hanging ring, standard nozzle accessories and an e-mode that stops the heating element after a selectable 0–1,990 seconds; a control-button input resumes heating. [9]The package lists cone and fishtail nozzles. The manual identifies the cone for shrink sleeving and limits operation to 60 minutes ON in a two-hour period. [12]The gun has an integrated upright support and hanging hook. The manual assigns the supplied nozzle set to PC1500HGA, not the selected PC1500HG. [15]The manual identifies a flat back rest for cooling before storage and a two-speed power switch. [18]HT400 has a retractable stand; Wagner lists electrical wire shrink tubing among its uses and offers separate craft/electronics accessory bundles. [21]The package includes hook and flat nozzles, lock-on/lock-off controls and an LED. Its manual limits use to 60 minutes ON within two hours. [24]The maker lists a guarded nozzle, ladder hook and LED; the manual identifies hook and air-reduction nozzles for heat shrinking. [27]The manual lists concentrator and deflector nozzles in the package, identifying the deflector for shrink tubing; it requires cool nozzles for attachment changes. [30]

Start with temperature and airflow controls

FURNO 500 offers twelve heat settings and two fan levels; HG 2320 Eco lists continuously variable airflow. WEN and D26960 document different temperature ranges for their fan stages. Choose the control arrangement your task needs rather than ranking solely by the highest stated temperature. [1] [7] [16] [10]

Treat outlet temperature as a qualified specification

DEWALT’s cordless maximum is measured after 340 seconds just 0.4 mm from the nozzle, while FURNO 500 and HT400 manuals describe heat outputs as approximate. Those figures do not establish the temperature of tubing, wire insulation or an adhesive at working distance. Confirm the material instructions and the selected gun’s operating limits. [22] [2] [20]

Check the nozzle, package and place to rest the tool

Makita supplies four nozzle shapes; PC1500HG is distinct from the PC1500HGA nozzle bundle. RYOBI lists concentrator and deflector tips. Confirm the exact package and recommended nozzle fit, then plan outlet access or the correct battery family and a bench layout that follows the manual. A stand or guarded nozzle is a design feature, not proof of an injury-free setup. [6] [15] [30] [23] [26]

How we compared.

Source-based comparison of actual maker pages and manuals read October 2, 2026; no hands-on temperature, runtime or material tests. Adjustable corded guns rank first for a bench with outlet access, followed by compact and existing-battery options. Ten distinct models are included; accessory-only kit variants are excluded. Clint DeBoer’s Pro Tool Reviews cordless comparison emphasizes matching cordless tools to the expected task and runtime; it informs our power-supply checks, not a measured result of our own. Temperatures are stated air-output specifications or settings, not workpiece temperatures or proof of compatibility with every tubing material. Use the instructions for both the selected gun and the material. Differing DeWalt cordless temperature figures remain unresolved.

How we choose

Sources

Official product documentation, reviewed October 2, 2026.

FURNO 500 model 503063 ↗

Wagner · US · Read October 2, 2026

FURNO 500 manual ↗

Wagner · US · Read October 2, 2026

HG6530VK US specifications and included kit ↗

Makita · US · Read October 2, 2026

HG 2320 Eco US data sheet, June 2024 ↗

STEINEL · US · Read October 2, 2026

D26960 US model page ↗

DEWALT · US · Read October 2, 2026

D26960 Type 10 US instruction manual ↗

DEWALT · US · Read October 2, 2026

PC1500HG model page ↗

PORTER-CABLE · US · Read October 2, 2026

PC1500HG/HGA instruction manual ↗

PORTER-CABLE · US · Read October 2, 2026

HG112V March 2023 instruction manual ↗

WEN · US · Read October 2, 2026

HT400 model 503038 ↗

Wagner · US · Read October 2, 2026

Micro Heat Tool manual linked by HT400 maker page ↗

Wagner · US · Read October 2, 2026

DCE530B US tool-only model page ↗

DEWALT · US · Read October 2, 2026

DCE530 US operator manual ↗

DEWALT · US · Read October 2, 2026

M18 Compact Heat Gun 2688-20 model page ↗

Milwaukee · US · Read October 2, 2026

2688-20 operator manual ↗

Milwaukee · US · Read October 2, 2026

P3150 18V ONE+ Heat Gun ↗

RYOBI · US · Read October 2, 2026

Clint DeBoer cordless heat-gun comparison ↗

Pro Tool Reviews · US · Read October 2, 2026

Detailed source notes
  1. Wagner FURNO 500: Wagner lists twelve temperature settings from 150 to 1,200°F, LED push-button controls, two fan settings and cool-down mode.

    Exact selected model and region. Maker air-output settings and ratings, not measured workpiece temperatures, calibration, material compatibility or runtime. Follow model and material instructions; display and stand features imply no safety outcome.

    FURNO 500 model 503063 · Named model specification/feature or package table; manual temperature/airflow stage, operating or accessories section
    12 temperature settings 150–1200°F; LED buttons; two fan settings and cool-down; 1500 W; glass protector and flare nozzles; integrated stand; maker lists electric heat-shrink tubes as an application.

    Checked October 2, 2026

  2. Wagner FURNO 500: FURNO 500 is a corded 1,500 W design; its manual describes the low and high heat outputs as approximate.

    Exact selected model and region. Maker air-output settings and ratings, not measured workpiece temperatures, calibration, material compatibility or runtime. Follow model and material instructions; display and stand features imply no safety outcome.

    FURNO 500 model 503063 · Named model specification/feature or package table; manual temperature/airflow stage, operating or accessories section
    12 temperature settings 150–1200°F; LED buttons; two fan settings and cool-down; 1500 W; glass protector and flare nozzles; integrated stand; maker lists electric heat-shrink tubes as an application.

    FURNO 500 manual · Named model specification/feature or package table; manual temperature/airflow stage, operating or accessories section
    Printed page 5: approximately 150°F low and 1200°F high; 1500 W highest, 150 W lowest. Page 9: heating results depend on material, ambient temperature, distance and technique. It instructs keeping the gun moving and at least 2 inches from the substrate.

    Checked October 2, 2026

  3. Wagner FURNO 500: The package includes glass-protector and flare nozzles and an integrated stand; Wagner lists electric heat-shrink tubing among its applications.

    Exact selected model and region. Maker air-output settings and ratings, not measured workpiece temperatures, calibration, material compatibility or runtime. Follow model and material instructions; display and stand features imply no safety outcome.

    FURNO 500 model 503063 · Named model specification/feature or package table; manual temperature/airflow stage, operating or accessories section
    12 temperature settings 150–1200°F; LED buttons; two fan settings and cool-down; 1500 W; glass protector and flare nozzles; integrated stand; maker lists electric heat-shrink tubes as an application.

    Checked October 2, 2026

  4. Makita LCD Heat Gun Kit: Makita specifies LCD push-button temperature control from 122 to 1,202°F in 50°F increments.

    Exact selected model and region. Maker air-output settings and ratings, not measured workpiece temperatures, calibration, material compatibility or runtime. Follow model and material instructions; display and stand features imply no safety outcome.

    HG6530VK US specifications and included kit · Named model specification/feature or package table; manual temperature/airflow stage, operating or accessories section
    Actual official US page fetched directly with curl after browser failed. HG6530VK: LCD push-button control 122–1202°F, 50°F increments; cooling/low/high slide settings; air volumes 10/17.6 CFM; 2 lb and integrated rear stand. Four included nozzles: 1-3/8 inch glass protection, wide slot, reflector, reduction; tool case. Page says AC-only 2000 W and 13 A; watt/amp rating consistency is not resolved or used. One overview paragraph names a different HG6031VK; its cord detail is excluded.

    Checked October 2, 2026

  5. Makita LCD Heat Gun Kit: The AC-powered model has cooling, low and high switch positions; the maker lists heated air volumes of 10 and 17.6 CFM.

    Exact selected model and region. Maker air-output settings and ratings, not measured workpiece temperatures, calibration, material compatibility or runtime. Follow model and material instructions; display and stand features imply no safety outcome.

    HG6530VK US specifications and included kit · Named model specification/feature or package table; manual temperature/airflow stage, operating or accessories section
    Actual official US page fetched directly with curl after browser failed. HG6530VK: LCD push-button control 122–1202°F, 50°F increments; cooling/low/high slide settings; air volumes 10/17.6 CFM; 2 lb and integrated rear stand. Four included nozzles: 1-3/8 inch glass protection, wide slot, reflector, reduction; tool case. Page says AC-only 2000 W and 13 A; watt/amp rating consistency is not resolved or used. One overview paragraph names a different HG6031VK; its cord detail is excluded.

    Checked October 2, 2026

  6. Makita LCD Heat Gun Kit: The kit includes glass-protection, wide-slot, reflector and reduction nozzles plus a tool case; the gun has an integrated rear stand.

    Exact selected model and region. Maker air-output settings and ratings, not measured workpiece temperatures, calibration, material compatibility or runtime. Follow model and material instructions; display and stand features imply no safety outcome.

    HG6530VK US specifications and included kit · Named model specification/feature or package table; manual temperature/airflow stage, operating or accessories section
    Actual official US page fetched directly with curl after browser failed. HG6530VK: LCD push-button control 122–1202°F, 50°F increments; cooling/low/high slide settings; air volumes 10/17.6 CFM; 2 lb and integrated rear stand. Four included nozzles: 1-3/8 inch glass protection, wide slot, reflector, reduction; tool case. Page says AC-only 2000 W and 13 A; watt/amp rating consistency is not resolved or used. One overview paragraph names a different HG6031VK; its cord detail is excluded.

    Checked October 2, 2026

  7. STEINEL HG 2320 Eco: STEINEL lists a 120–1,200°F range, continuously variable 4–13 CFM airflow, an LCD and four programmable settings.

    Exact selected model and region. Maker air-output settings and ratings, not measured workpiece temperatures, calibration, material compatibility or runtime. Follow model and material instructions; display and stand features imply no safety outcome.

    HG 2320 Eco US data sheet, June 2024 · Named model specification/feature or package table; manual temperature/airflow stage, operating or accessories section
    Exact product number 110102124, not legacy E or ESD. 120 VAC 60 Hz; 1600 W; 120–1200°F; continuously variable 4–13 CFM; LCD, four programmable settings, hanging ring, residual heat indicator; 6-foot cord; e-mode heating-element shutoff after a selectable 0–1990 seconds, restored by joystick/program/fan button. No measured energy or safety result inferred. Standard accessories mentioned; exact supplied nozzles not identified.

    Checked October 2, 2026

  8. STEINEL HG 2320 Eco: The US 110102124 data sheet specifies 120 V AC, 60 Hz, 1,600 W and a six-foot power cord.

    Exact selected model and region. Maker air-output settings and ratings, not measured workpiece temperatures, calibration, material compatibility or runtime. Follow model and material instructions; display and stand features imply no safety outcome.

    HG 2320 Eco US data sheet, June 2024 · Named model specification/feature or package table; manual temperature/airflow stage, operating or accessories section
    Exact product number 110102124, not legacy E or ESD. 120 VAC 60 Hz; 1600 W; 120–1200°F; continuously variable 4–13 CFM; LCD, four programmable settings, hanging ring, residual heat indicator; 6-foot cord; e-mode heating-element shutoff after a selectable 0–1990 seconds, restored by joystick/program/fan button. No measured energy or safety result inferred. Standard accessories mentioned; exact supplied nozzles not identified.

    Checked October 2, 2026

  9. STEINEL HG 2320 Eco: The Eco model lists a hanging ring, standard nozzle accessories and an e-mode that stops the heating element after a selectable 0–1,990 seconds; a control-button input resumes heating.

    Exact selected model and region. Maker air-output settings and ratings, not measured workpiece temperatures, calibration, material compatibility or runtime. Follow model and material instructions; display and stand features imply no safety outcome.

    HG 2320 Eco US data sheet, June 2024 · Named model specification/feature or package table; manual temperature/airflow stage, operating or accessories section
    Exact product number 110102124, not legacy E or ESD. 120 VAC 60 Hz; 1600 W; 120–1200°F; continuously variable 4–13 CFM; LCD, four programmable settings, hanging ring, residual heat indicator; 6-foot cord; e-mode heating-element shutoff after a selectable 0–1990 seconds, restored by joystick/program/fan button. No measured energy or safety result inferred. Standard accessories mentioned; exact supplied nozzles not identified.

    Checked October 2, 2026

  10. DEWALT LCD Heat Gun: DEWALT specifies 50°F LCD adjustment steps; its Type 10 D26960 manual lists low 150–750°F at 8.8 CFM and high 150–1,100°F at 17.7 CFM.

    Exact selected model and region. Maker air-output settings and ratings, not measured workpiece temperatures, calibration, material compatibility or runtime. Follow model and material instructions; display and stand features imply no safety outcome.

    D26960 Type 10 US instruction manual · Named model specification/feature or package table; manual temperature/airflow stage, operating or accessories section
    Printed page 5 D26960-specific rows: low 8.8 CFM / 150–750°F; high 17.7 CFM / 150–1100°F; LCD increments 50°F. Do not exceed 60 minutes ON in a 2-hour period. Cone nozzle is listed for shrink sleeving; fish-tail spreads air. Printed page 6: kickstand for stationary use with cord secured. Mixed D26950 rows are excluded.

    Checked October 2, 2026

  11. DEWALT LCD Heat Gun: D26960 is corded and has a kickstand, hanging ring and cord protector.

    Exact selected model and region. Maker air-output settings and ratings, not measured workpiece temperatures, calibration, material compatibility or runtime. Follow model and material instructions; display and stand features imply no safety outcome.

    D26960 US model page · Named model specification/feature or package table; manual temperature/airflow stage, operating or accessories section
    Actual page directly fetched with urllib after browser 403. Corded D26960; LCD adjustment in 50-degree increments; kickstand, hanging ring, cord protector; includes fishtail surface nozzle and cone nozzle.

    Checked October 2, 2026

  12. DEWALT LCD Heat Gun: The package lists cone and fishtail nozzles. The manual identifies the cone for shrink sleeving and limits operation to 60 minutes ON in a two-hour period.

    Exact selected model and region. Maker air-output settings and ratings, not measured workpiece temperatures, calibration, material compatibility or runtime. Follow model and material instructions; display and stand features imply no safety outcome.

    D26960 US model page · Named model specification/feature or package table; manual temperature/airflow stage, operating or accessories section
    Actual page directly fetched with urllib after browser 403. Corded D26960; LCD adjustment in 50-degree increments; kickstand, hanging ring, cord protector; includes fishtail surface nozzle and cone nozzle.

    D26960 Type 10 US instruction manual · Named model specification/feature or package table; manual temperature/airflow stage, operating or accessories section
    Printed page 5 D26960-specific rows: low 8.8 CFM / 150–750°F; high 17.7 CFM / 150–1100°F; LCD increments 50°F. Do not exceed 60 minutes ON in a 2-hour period. Cone nozzle is listed for shrink sleeving; fish-tail spreads air. Printed page 6: kickstand for stationary use with cord secured. Mixed D26950 rows are excluded.

    Checked October 2, 2026

  13. PORTER-CABLE 1500-Watt Heat Gun: PORTER-CABLE lists a variable-temperature dial and high/low fan selector; its manual says the switch changes fan speed and heat output together.

    Exact selected model and region. Maker air-output settings and ratings, not measured workpiece temperatures, calibration, material compatibility or runtime. Follow model and material instructions; display and stand features imply no safety outcome.

    PC1500HG model page · Named model specification/feature or package table; manual temperature/airflow stage, operating or accessories section
    1500 W; high/low fan selector; variable-temperature dial; integrated upright support and hanging hook; 6-foot cord; 2 lb. Includes list identifies the PC1500HG only, not the accessory kit.

    PC1500HG/HGA instruction manual · Named model specification/feature or package table; manual temperature/airflow stage, operating or accessories section
    Printed pages 6–8: switch positions change fan speed and heat output together; temperature ranges overlap with adjustment dial. Heat-shrinkable tubing listed among uses. The nozzle attachment set is identified as included with PC1500HGA, not selected PC1500HG. Unplug and cool before changing accessories.

    Checked October 2, 2026

  14. PORTER-CABLE 1500-Watt Heat Gun: The maker specifies 1,500 W, a two-pound body and a six-foot cord.

    Exact selected model and region. Maker air-output settings and ratings, not measured workpiece temperatures, calibration, material compatibility or runtime. Follow model and material instructions; display and stand features imply no safety outcome.

    PC1500HG model page · Named model specification/feature or package table; manual temperature/airflow stage, operating or accessories section
    1500 W; high/low fan selector; variable-temperature dial; integrated upright support and hanging hook; 6-foot cord; 2 lb. Includes list identifies the PC1500HG only, not the accessory kit.

    Checked October 2, 2026

  15. PORTER-CABLE 1500-Watt Heat Gun: The gun has an integrated upright support and hanging hook. The manual assigns the supplied nozzle set to PC1500HGA, not the selected PC1500HG.

    Exact selected model and region. Maker air-output settings and ratings, not measured workpiece temperatures, calibration, material compatibility or runtime. Follow model and material instructions; display and stand features imply no safety outcome.

    PC1500HG model page · Named model specification/feature or package table; manual temperature/airflow stage, operating or accessories section
    1500 W; high/low fan selector; variable-temperature dial; integrated upright support and hanging hook; 6-foot cord; 2 lb. Includes list identifies the PC1500HG only, not the accessory kit.

    PC1500HG/HGA instruction manual · Named model specification/feature or package table; manual temperature/airflow stage, operating or accessories section
    Printed pages 6–8: switch positions change fan speed and heat output together; temperature ranges overlap with adjustment dial. Heat-shrinkable tubing listed among uses. The nozzle attachment set is identified as included with PC1500HGA, not selected PC1500HG. Unplug and cool before changing accessories.

    Checked October 2, 2026

  16. WEN Variable-Temperature Heat Gun: The WEN manual specifies low-speed 122–842°F at 79 GPM and high-speed 194–1,112°F at 132 GPM, adjusted with a temperature dial.

    Exact selected model and region. Maker air-output settings and ratings, not measured workpiece temperatures, calibration, material compatibility or runtime. Follow model and material instructions; display and stand features imply no safety outcome.

    HG112V March 2023 instruction manual · Named model specification/feature or package table; manual temperature/airflow stage, operating or accessories section
    Printed page 3: 120 V 60 Hz; low 122–842°F, 79 GPM, 6.25 A; high 194–1112°F, 132 GPM, 12.5 A; 1.30 lb. Pages 9–10: temperature dial and two-speed power switch; flat back rest for cooling before storage. No model-specific additional nozzle list retained.

    Checked October 2, 2026

  17. WEN Variable-Temperature Heat Gun: HG112V uses 120 V AC at 60 Hz; the maker lists 6.25 A low, 12.5 A high and a 1.30-pound weight.

    Exact selected model and region. Maker air-output settings and ratings, not measured workpiece temperatures, calibration, material compatibility or runtime. Follow model and material instructions; display and stand features imply no safety outcome.

    HG112V March 2023 instruction manual · Named model specification/feature or package table; manual temperature/airflow stage, operating or accessories section
    Printed page 3: 120 V 60 Hz; low 122–842°F, 79 GPM, 6.25 A; high 194–1112°F, 132 GPM, 12.5 A; 1.30 lb. Pages 9–10: temperature dial and two-speed power switch; flat back rest for cooling before storage. No model-specific additional nozzle list retained.

    Checked October 2, 2026

  18. WEN Variable-Temperature Heat Gun: The manual identifies a flat back rest for cooling before storage and a two-speed power switch.

    Exact selected model and region. Maker air-output settings and ratings, not measured workpiece temperatures, calibration, material compatibility or runtime. Follow model and material instructions; display and stand features imply no safety outcome.

    HG112V March 2023 instruction manual · Named model specification/feature or package table; manual temperature/airflow stage, operating or accessories section
    Printed page 3: 120 V 60 Hz; low 122–842°F, 79 GPM, 6.25 A; high 194–1112°F, 132 GPM, 12.5 A; 1.30 lb. Pages 9–10: temperature dial and two-speed power switch; flat back rest for cooling before storage. No model-specific additional nozzle list retained.

    Checked October 2, 2026

  19. Wagner HT400 Heat Tool: Wagner lists an angled body with palm, pencil and hands-free positions and two heat settings: 450°F low and 680°F high.

    Exact selected model and region. Maker air-output settings and ratings, not measured workpiece temperatures, calibration, material compatibility or runtime. Follow model and material instructions; display and stand features imply no safety outcome.

    HT400 model 503038 · Named model specification/feature or package table; manual temperature/airflow stage, operating or accessories section
    Low 450°F, high 680°F; angled palm/pencil/hands-free positions; retractable stand; maker identifies wire shrink tubing and hobby/craft projects. Accessory bundles listed separately.

    Checked October 2, 2026

  20. Wagner HT400 Heat Tool: The manual linked on the model page specifies 110–120 V AC, 170 W low/350 W high and a six-foot cord; heat outputs are approximate.

    Exact selected model and region. Maker air-output settings and ratings, not measured workpiece temperatures, calibration, material compatibility or runtime. Follow model and material instructions; display and stand features imply no safety outcome.

    Micro Heat Tool manual linked by HT400 maker page · Named model specification/feature or package table; manual temperature/airflow stage, operating or accessories section
    Manual linked directly on HT400 page: approximate low 450°F, high 680°F; 170 W low/350 W high; 110–120 V AC; 6-foot cord; low/OFF/high switch; stand for bench/cool-down. No independent airflow control. Keep at least 2 inches from work surface; cool before storage. Label is Micro Heat Tool rather than HT400 on cover; linkage retained.

    Checked October 2, 2026

  21. Wagner HT400 Heat Tool: HT400 has a retractable stand; Wagner lists electrical wire shrink tubing among its uses and offers separate craft/electronics accessory bundles.

    Exact selected model and region. Maker air-output settings and ratings, not measured workpiece temperatures, calibration, material compatibility or runtime. Follow model and material instructions; display and stand features imply no safety outcome.

    HT400 model 503038 · Named model specification/feature or package table; manual temperature/airflow stage, operating or accessories section
    Low 450°F, high 680°F; angled palm/pencil/hands-free positions; retractable stand; maker identifies wire shrink tubing and hobby/craft projects. Accessory bundles listed separately.

    Checked October 2, 2026

  22. DEWALT 20V MAX Cordless Heat Gun: DEWALT describes two heat settings and a maximum 990°F output measured on high after 340 seconds at 0.4 mm from the nozzle; its manual gives different preliminary/stage figures.

    Exact selected model and region. Maker air-output settings and ratings, not measured workpiece temperatures, calibration, material compatibility or runtime. Follow model and material instructions; display and stand features imply no safety outcome.

    DCE530B US tool-only model page · Named model specification/feature or package table; manual temperature/airflow stage, operating or accessories section
    Actual page directly fetched with urllib after browser 403. Two temperature settings; 20 V MAX (18 V nominal) battery system; battery and charger sold separately; lock-on button, lock-off trigger, LED; flat and hook nozzles. Maker claims 990°F maximum on high AFTER 340 seconds measured 0.4 mm from nozzle; airflow 6.7 CFM measured at nozzle on high. These are not workpiece or instantaneous figures. Runtime marketing is excluded.

    DCE530 US operator manual · Named model specification/feature or package table; manual temperature/airflow stage, operating or accessories section
    Printed pages 8–9: two-setting switch; text gives preliminary low 550°F/high 875°F, while another switch table gives low 120–500°F 3.5 CFM and high 120–875°F 7 CFM. Current page advertises conditioned maximum 990°F; numerical stages remain unresolved. Manual says do not exceed 60 minutes ON in 2 hours. Hook/reflector and fish-tail attachments described; lock-on/lock-off and stationary use. No precision or material success inferred.

    Checked October 2, 2026

  23. DEWALT 20V MAX Cordless Heat Gun: The tool uses the 20V MAX battery system, nominally 18 V; the selected B package excludes battery and charger.

    Exact selected model and region. Maker air-output settings and ratings, not measured workpiece temperatures, calibration, material compatibility or runtime. Follow model and material instructions; display and stand features imply no safety outcome.

    DCE530B US tool-only model page · Named model specification/feature or package table; manual temperature/airflow stage, operating or accessories section
    Actual page directly fetched with urllib after browser 403. Two temperature settings; 20 V MAX (18 V nominal) battery system; battery and charger sold separately; lock-on button, lock-off trigger, LED; flat and hook nozzles. Maker claims 990°F maximum on high AFTER 340 seconds measured 0.4 mm from nozzle; airflow 6.7 CFM measured at nozzle on high. These are not workpiece or instantaneous figures. Runtime marketing is excluded.

    Checked October 2, 2026

  24. DEWALT 20V MAX Cordless Heat Gun: The package includes hook and flat nozzles, lock-on/lock-off controls and an LED. Its manual limits use to 60 minutes ON within two hours.

    Exact selected model and region. Maker air-output settings and ratings, not measured workpiece temperatures, calibration, material compatibility or runtime. Follow model and material instructions; display and stand features imply no safety outcome.

    DCE530B US tool-only model page · Named model specification/feature or package table; manual temperature/airflow stage, operating or accessories section
    Actual page directly fetched with urllib after browser 403. Two temperature settings; 20 V MAX (18 V nominal) battery system; battery and charger sold separately; lock-on button, lock-off trigger, LED; flat and hook nozzles. Maker claims 990°F maximum on high AFTER 340 seconds measured 0.4 mm from nozzle; airflow 6.7 CFM measured at nozzle on high. These are not workpiece or instantaneous figures. Runtime marketing is excluded.

    DCE530 US operator manual · Named model specification/feature or package table; manual temperature/airflow stage, operating or accessories section
    Printed pages 8–9: two-setting switch; text gives preliminary low 550°F/high 875°F, while another switch table gives low 120–500°F 3.5 CFM and high 120–875°F 7 CFM. Current page advertises conditioned maximum 990°F; numerical stages remain unresolved. Manual says do not exceed 60 minutes ON in 2 hours. Hook/reflector and fish-tail attachments described; lock-on/lock-off and stationary use. No precision or material success inferred.

    Checked October 2, 2026

  25. Milwaukee M18 Compact Heat Gun: Milwaukee’s operator manual rates 2688-20 at 875°F and 6 CFM and describes an on/off trigger rather than adjustable temperature stages.

    Exact selected model and region. Maker air-output settings and ratings, not measured workpiece temperatures, calibration, material compatibility or runtime. Follow model and material instructions; display and stand features imply no safety outcome.

    2688-20 operator manual · Named model specification/feature or package table; manual temperature/airflow stage, operating or accessories section
    Printed pages 4–5: 18 V DC, M18 battery/charger types, 875°F, 6 CFM; on/off lock-off trigger; hook or air-reduction nozzle listed for heat shrinking; use recommended accessories; remove battery and allow room-temperature cooling before nozzle changes. Workpiece heating depends on distance and application time. No adjustable temperature or fan controls specified.

    Checked October 2, 2026

  26. Milwaukee M18 Compact Heat Gun: The manual specifies 18 V DC and M18 battery/charger types; the maker lists a 6.4-inch body length.

    Exact selected model and region. Maker air-output settings and ratings, not measured workpiece temperatures, calibration, material compatibility or runtime. Follow model and material instructions; display and stand features imply no safety outcome.

    2688-20 operator manual · Named model specification/feature or package table; manual temperature/airflow stage, operating or accessories section
    Printed pages 4–5: 18 V DC, M18 battery/charger types, 875°F, 6 CFM; on/off lock-off trigger; hook or air-reduction nozzle listed for heat shrinking; use recommended accessories; remove battery and allow room-temperature cooling before nozzle changes. Workpiece heating depends on distance and application time. No adjustable temperature or fan controls specified.

    M18 Compact Heat Gun 2688-20 model page · Named model specification/feature or package table; manual temperature/airflow stage, operating or accessories section
    Compatible with all M18 REDLITHIUM battery packs; 6.4 inch body length; guarded nozzle, ladder hook and LED. Marketing connection counts and quick-heat claims are excluded.

    Checked October 2, 2026

  27. Milwaukee M18 Compact Heat Gun: The maker lists a guarded nozzle, ladder hook and LED; the manual identifies hook and air-reduction nozzles for heat shrinking.

    Exact selected model and region. Maker air-output settings and ratings, not measured workpiece temperatures, calibration, material compatibility or runtime. Follow model and material instructions; display and stand features imply no safety outcome.

    M18 Compact Heat Gun 2688-20 model page · Named model specification/feature or package table; manual temperature/airflow stage, operating or accessories section
    Compatible with all M18 REDLITHIUM battery packs; 6.4 inch body length; guarded nozzle, ladder hook and LED. Marketing connection counts and quick-heat claims are excluded.

    2688-20 operator manual · Named model specification/feature or package table; manual temperature/airflow stage, operating or accessories section
    Printed pages 4–5: 18 V DC, M18 battery/charger types, 875°F, 6 CFM; on/off lock-off trigger; hook or air-reduction nozzle listed for heat shrinking; use recommended accessories; remove battery and allow room-temperature cooling before nozzle changes. Workpiece heating depends on distance and application time. No adjustable temperature or fan controls specified.

    Checked October 2, 2026

  28. RYOBI 18V ONE+ Heat Gun: RYOBI and its P3150 manual list a maximum temperature of 875°F and trigger-controlled operation.

    Exact selected model and region. Maker air-output settings and ratings, not measured workpiece temperatures, calibration, material compatibility or runtime. Follow model and material instructions; display and stand features imply no safety outcome.

    P3150 18V ONE+ Heat Gun · Named model specification/feature or package table; manual temperature/airflow stage, operating or accessories section
    P3150 identity; 18 V ONE+ battery system; maximum temperature 875 degrees; LED, deflector and concentrator nozzles. Quick-heating marketing excluded; no numeric airflow or temperature-stage list exposed.

    P3150 maker operator manual, hosted by Home Depot · Named model specification/feature or package table; manual temperature/airflow stage, operating or accessories section
    Cover names P3150 and includes gun, concentrator nozzle, deflector nozzle and manual. Printed pages 6–7: 18 V pack, max 875°F; lock-off button and on/off trigger; LED; deflector for shrink tubing; remove/install attachments only when both nozzle and attachment cool. Battery/charger packing not established.

    Checked October 2, 2026

  29. RYOBI 18V ONE+ Heat Gun: P3150 uses an 18 V ONE+ battery pack and has an LED work light.

    Exact selected model and region. Maker air-output settings and ratings, not measured workpiece temperatures, calibration, material compatibility or runtime. Follow model and material instructions; display and stand features imply no safety outcome.

    P3150 18V ONE+ Heat Gun · Named model specification/feature or package table; manual temperature/airflow stage, operating or accessories section
    P3150 identity; 18 V ONE+ battery system; maximum temperature 875 degrees; LED, deflector and concentrator nozzles. Quick-heating marketing excluded; no numeric airflow or temperature-stage list exposed.

    P3150 maker operator manual, hosted by Home Depot · Named model specification/feature or package table; manual temperature/airflow stage, operating or accessories section
    Cover names P3150 and includes gun, concentrator nozzle, deflector nozzle and manual. Printed pages 6–7: 18 V pack, max 875°F; lock-off button and on/off trigger; LED; deflector for shrink tubing; remove/install attachments only when both nozzle and attachment cool. Battery/charger packing not established.

    Checked October 2, 2026

  30. RYOBI 18V ONE+ Heat Gun: The manual lists concentrator and deflector nozzles in the package, identifying the deflector for shrink tubing; it requires cool nozzles for attachment changes.

    Exact selected model and region. Maker air-output settings and ratings, not measured workpiece temperatures, calibration, material compatibility or runtime. Follow model and material instructions; display and stand features imply no safety outcome.

    P3150 maker operator manual, hosted by Home Depot · Named model specification/feature or package table; manual temperature/airflow stage, operating or accessories section
    Cover names P3150 and includes gun, concentrator nozzle, deflector nozzle and manual. Printed pages 6–7: 18 V pack, max 875°F; lock-off button and on/off trigger; LED; deflector for shrink tubing; remove/install attachments only when both nozzle and attachment cool. Battery/charger packing not established.

    Checked October 2, 2026

Something changed? Help us correct the record.