Our top 10, at a glance.
Choose an oscillating multi-tool for renovation detail work, matching blades, speed controls, power supply and optional depth or dust accessories to the task.
- #1Makita XMT04ZBMakita XMT04ZB
- #2DEWALT DCS356BDEWALT DCS356B
- #3Milwaukee M18 FUEL 2836-20Milwaukee M18 FUEL 2836-20
- #4FEIN MULTIMASTER MM 700 Max TopFEIN MULTIMASTER MM 700 Max Top
- #5FLEX FX4111-1A KitFLEX FX4111-1A Kit
- #6Festool VECTURO OSC 18 E-BasicFestool VECTURO OSC 18 E-Basic
- #7Bosch GOP40-30CBosch GOP40-30C
- #8Milwaukee M12 FUEL 2526-20Milwaukee M12 FUEL 2526-20
- #9RIDGID R86242BRIDGID R86242B
- #10RYOBI PBLMT51B ONE+ HPRYOBI PBLMT51B ONE+ HP
All 10 picks, in order.
- #1
Makita XMT04ZB
Makita XMT04ZB
An LXT small barrel with broad Starlock support
Why it fits
- XMT04ZB leads for LXT users prioritizing a small barrel and documented accessory fit. Makita lists 10,000–20,000 OPM, a 3.6° total oscillation angle, a speed dial and a lock-on slide switch. Its AVT internal counterbalance is a maker-described vibration feature, not our measured comfort result. The tool supports Starlock, StarlockPlus and StarlockMax accessories with tool-less changes. Match the blade to the material and exact interface rather than treating every multi-tool blade as interchangeable. The optional dust attachment in the manual is for sanding and must not be used when sanding metal. Battery and charger are separate. The manual lists a 12-inch length with BL1820B and 12-5/8 inches with BL1860B, so pack choice changes the space needed behind the tool. This is the selected XMT04ZB, not a battery kit. Budget the optional sanding dust attachment and verify the complete extraction connection. [1] [2] [3]
Model: US XMT04ZB; 18V LXT Sub-Compact bare tool · One exact selected US physical oscillating multi-tool; a kit is not a second pick. · US
- #2
DEWALT DCS356B
DEWALT DCS356B
A dual-grip trigger with three speed selections
Why it fits
- DCS356B suits 20V MAX users who prefer a variable-speed trigger to a slide switch. The three-speed selector sets the range while the DUAL-GRIP trigger controls speed within it. DEWALT lists a brushless motor and LED. Exact oscillation angle and speed ranges were not established in this comparison. The quick-change clamping system works without a wrench for matching accessories. A universal accessory adapter is included, but the manual requires a hex wrench to tighten its nut for non-DEWALT accessories. The maker says most accessory brands; that does not establish compatibility with every StarlockMax blade. The B package includes wood-with-nails and fast-cut wood blades plus the adapter. Battery, charger and tool guide system are separate. The manual shows depth and cut guides; budget them if controlling plunge depth matters. A model-matched dust attachment was not established here, so confirm that separately for detail sanding. [4] [5] [6]
Model: US DCS356B; 20V MAX XR bare three-speed tool · One exact selected US physical oscillating multi-tool; a kit is not a second pick. · US
- #3
Milwaukee M18 FUEL 2836-20
Milwaukee M18 FUEL 2836-20
An M18 dial with a separate Auto-Load mode
Why it fits
- 2836-20 suits M18 users wanting preset speed control plus Auto-Load. Milwaukee lists 10,000–20,000 OPM, a 4.2° angle and ten dial settings. The manual says Auto-Load starts at 15,000 OPM and increases to 20,000 when loaded. Its slide switch and 180° LED span are documented features. Blade changes use a quick-release lever and a hand-tightened accessory bolt. The manual says an adapter may be necessary if an accessory does not fit snugly on the flange, and identifies separately available 48-03-2526 for certain arbor types. Confirm the exact blade fit rather than assuming StarlockMax snap-in compatibility. It works with M18 batteries; battery and charger are separate. Milwaukee describes vibration dampening, but we do not rank measured vibration or cutting speed. Exact supplied blades and a dedicated dust attachment were not established from the reviewed page, so verify the selected seller package and extraction accessories before buying. [7] [8] [9]
Model: US 2836-20; M18 bare oscillating multi-tool · One exact selected US physical oscillating multi-tool; a kit is not a second pick. · US
- #4
FEIN MULTIMASTER MM 700 Max Top
FEIN MULTIMASTER MM 700 Max Top
A corded StarlockMax kit with sanding dust equipment
Why it fits
- MM 700 Max Top suits a corded renovation station with a broad accessory kit. FEIN specifies 450W power consumption, 10,000–19,500 OPM and an angle of 2 × 2°. Infinitely variable electronic control and an anti-vibration system are documented; the input wattage is not blade output or a cutting-speed result. The StarlockMax mount supports Starlock, StarlockPlus and StarlockMax accessories, using QuickIN tool-free changes. FEIN describes a mechanical interface for depth stops and stationary holders. Check the exact additional holder or stop if guided work is part of the plan rather than assuming it is supplied. The Top package includes a range of cutting blades, carbide rasp, rigid scraper, perforated sanding pad, sanding sheets, a dust extraction device and L-BOXX 136. Its cord is 16.4 feet. An included dust device does not establish capture efficiency or supply the extractor; confirm the material-specific setup and hose connection. [10] [11] [12]
Model: US 72296864090; corded MM 700 Max Top package · One exact selected US physical oscillating multi-tool; a kit is not a second pick. · US
- #5
FLEX FX4111-1A Kit
FLEX FX4111-1A Kit
A complete battery kit with five presets and a depth guide
Why it fits
- FX4111-1A suits buyers starting a FLEX setup. The brushless tool has five speed settings, 10,000–20,000 no-load OPM and a 4° total angle, stated as ±2°. FLEX lists vibration suppression and an LED; neither establishes our measured handling or cutting result. Its StarlockMax accessory system accepts Starlock, StarlockPlus and StarlockMax blades. Keyless blade eject is documented. The included depth guide gives this package a distinct accessory choice, but we have not measured plunge accuracy or verified every blade-and-guide combination. This kit includes a 2.5Ah battery, 160W fast charger, two 1-1/4-inch plunge blades, depth guide and bag. It uses the FLEX 24V platform. Select the -1A kit rather than the FX4111-Z bare option. A dust collection device is not listed in the kit; confirm a model-matched setup if sanding dust decides the purchase. [13] [14] [15]
Model: US FX4111-1A; 24V kit with 2.5Ah battery · One exact selected US physical oscillating multi-tool; a kit is not a second pick. · US
- #6
Festool VECTURO OSC 18 E-Basic
Festool VECTURO OSC 18 E-Basic
An optional plunge-base and depth-stop system
Why it fits
- OSC 18 E-Basic suits buyers who want to build around optional guided-cut accessories. Festool documents a brushless EC-TEC motor, variable-speed control, a 10,000–19,500 min−1 speed range and a 2 × 2° angle. Housing-and-motor vibration isolation is a maker feature, not a measured comfort comparison. The StarlockMax holder accepts StarlockMax, StarlockPlus and Starlock accessories. Plunge base and depth stops are separate from this Basic package. The manual says a depth stop, dust extraction device and positioning aid mount to an adapter and can be offset in 30° increments. Price the exact accessory system you intend to use. The selected Basic package lists a USB 78/32/Bi/OSC blade and SYS3 M 187 Systainer, without battery or charger. It uses 18V BP 18 batteries. The manual shows adapter-mounted extraction connected to a suction hose; the device and suitable extractor require separate planning. We have not measured cut accuracy or dust capture. [16] [17] [18]
Model: US 576589; OSC 18 E-Basic package · One exact selected US physical oscillating multi-tool; a kit is not a second pick. · US
- #7
Bosch GOP40-30C
Bosch GOP40-30C
Corded StarlockPlus with named sanding dust accessories
Why it fits
- GOP40-30C suits a corded setup where StarlockPlus blades and a documented sanding attachment are enough. Bosch lists a 4A, 120V motor, a 3° angle, 8,000–20,000 OPM and a variable-speed dial. The slide switch, LED and ball-joint cord swivel are useful layout distinctions; no tested cutting advantage is claimed here. The snap-in mount accepts Starlock and StarlockPlus accessories, explicitly not StarlockMax. Bosch lists OSC004 depth stop and a separate OSC005 dust collection attachment for sanding only with specified sanding accessories. Match the exact pad and attachment; do not extend that sanding support to cutting dust collection. The kit lists three plunge blades, a segment blade, rigid scraper, sanding pad, 25 sanding sheets, accessory box and carrying case. OSC004 and OSC005 appear as compatible accessories rather than included items. Bosch lists an 11-inch tool length; allow space for the cord and chosen blade orientation in confined work. [19] [20] [21]
Model: US 0601231011; corded 32-piece GOP40-30C kit · One exact selected US physical oscillating multi-tool; a kit is not a second pick. · US
- #8
Milwaukee M12 FUEL 2526-20
Milwaukee M12 FUEL 2526-20
Twelve speed settings for an existing M12 setup
Why it fits
- 2526-20 suits an existing M12 tool setup and a buyer wanting twelve dial settings. Milwaukee lists a brushless motor, 10,000–20,000 OPM, a 3.9° angle and an LED. The manual documents a slide switch. Unlike the selected M18 pick, Auto-Load is not established for this model. The quick-release lever opens the mount, followed by removing and hand-tightening the accessory bolt. Its manual also identifies 48-03-2526 as a separately available adapter for certain arbor types. Match the blade to the flange and any required adapter rather than treating tool-free changes as universal blade fit. It uses M12 batteries; battery and charger are separate. Vibration isolation is a documented design feature. We do not claim it is the smallest or lightest assembled option: compare the selected battery and blade orientation in the actual recess. Confirm seller box contents and a suitable dust setup, which were not established here. [22] [23] [24]
Model: US 2526-20; M12 bare oscillating multi-tool · One exact selected US physical oscillating multi-tool; a kit is not a second pick. · US
- #9
RIDGID R86242B
RIDGID R86242B
A RIDGID trigger and selector with sanding accessories
Why it fits
- R86242B suits RIDGID 18V users who want both a variable-speed trigger and three-speed selector. The maker lists a 4° angle, 0–20,000 OPM, brushless motor and LED. Its vibration-reduction description is not our measurement, and the angle alone does not establish faster cutting. RIDGID documents tool-free accessory changes and says it accepts most multi-tool accessories. Exact interface exclusions and adapter requirements were not established here; confirm the chosen blade with the maker. The included sanding pad provides a starting point for detail sanding, not proof of fit for every aftermarket pad. Battery and charger are separate, with all RIDGID 18V batteries listed compatible. The package includes sanding pad, sandpaper, segment blade and plunge blade. Check assembled head, pack and blade clearance for the recess; we do not reproduce the maker’s percentage size comparison. A matching dust attachment was not established. [25] [26] [27]
Model: US R86242B; 18V brushless bare tool · One exact selected US physical oscillating multi-tool; a kit is not a second pick. · US
- #10
RYOBI PBLMT51B ONE+ HP
RYOBI PBLMT51B ONE+ HP
ONE+ speed dial with a lock-on button and sanding pad
Why it fits
- PBLMT51B suits ONE+ users wanting a speed dial and lock-on button for extended tasks. The actual official description lists a 3.8° angle, 10,000–20,000 OPM, brushless motor and LED. Choose the selected 51B model rather than transferring specifications from the earlier PBLMT50B. RYOBI describes tool-free accessory changes and compatibility with most multi-tool accessories. Exact blade-interface exclusions were not established here, so confirm the specific blade and any adapter. The sanding pad is included; a grout blade is mentioned as an application accessory but is not listed in the supplied package. The B option is tool only and uses 18V ONE+ batteries, with battery and charger separate. Its described box includes two plunge blades, sanding pad and sandpaper. Check the battery-and-blade arrangement against the work area. A dust collection device is not listed; confirm a suitable attachment before making sanding dust the deciding factor. [28] [29] [30]
Model: US PBLMT51B; 18V ONE+ HP bare tool · One exact selected US physical oscillating multi-tool; a kit is not a second pick. · US
The details, side by side.
| What matters | #1Makita XMT04ZB | #2DEWALT DCS356B | #3Milwaukee M18 FUEL 2836-20 | #4FEIN MULTIMASTER MM 700 Max Top | #5FLEX FX4111-1A Kit | #6Festool VECTURO OSC 18 E-Basic | #7Bosch GOP40-30C | #8Milwaukee M12 FUEL 2526-20 | #9RIDGID R86242B | #10RYOBI PBLMT51B ONE+ HP |
|---|---|---|---|---|---|---|---|---|---|---|
| Workflow | XMT04ZB leads for LXT users prioritizing a small barrel and documented accessory fit. Makita lists 10,000–20,000 OPM, a 3.6° total oscillation angle, a speed dial and a lock-on slide switch. Its AVT internal counterbalance is a maker-described vibration feature, not our measured comfort result. [1] | DCS356B suits 20V MAX users who prefer a variable-speed trigger to a slide switch. The three-speed selector sets the range while the DUAL-GRIP trigger controls speed within it. DEWALT lists a brushless motor and LED. Exact oscillation angle and speed ranges were not established in this comparison. [4] | 2836-20 suits M18 users wanting preset speed control plus Auto-Load. Milwaukee lists 10,000–20,000 OPM, a 4.2° angle and ten dial settings. The manual says Auto-Load starts at 15,000 OPM and increases to 20,000 when loaded. Its slide switch and 180° LED span are documented features. [7] | MM 700 Max Top suits a corded renovation station with a broad accessory kit. FEIN specifies 450W power consumption, 10,000–19,500 OPM and an angle of 2 × 2°. Infinitely variable electronic control and an anti-vibration system are documented; the input wattage is not blade output or a cutting-speed result. [10] | FX4111-1A suits buyers starting a FLEX setup. The brushless tool has five speed settings, 10,000–20,000 no-load OPM and a 4° total angle, stated as ±2°. FLEX lists vibration suppression and an LED; neither establishes our measured handling or cutting result. [13] | OSC 18 E-Basic suits buyers who want to build around optional guided-cut accessories. Festool documents a brushless EC-TEC motor, variable-speed control, a 10,000–19,500 min−1 speed range and a 2 × 2° angle. Housing-and-motor vibration isolation is a maker feature, not a measured comfort comparison. [16] | GOP40-30C suits a corded setup where StarlockPlus blades and a documented sanding attachment are enough. Bosch lists a 4A, 120V motor, a 3° angle, 8,000–20,000 OPM and a variable-speed dial. The slide switch, LED and ball-joint cord swivel are useful layout distinctions; no tested cutting advantage is claimed here. [19] | 2526-20 suits an existing M12 tool setup and a buyer wanting twelve dial settings. Milwaukee lists a brushless motor, 10,000–20,000 OPM, a 3.9° angle and an LED. The manual documents a slide switch. Unlike the selected M18 pick, Auto-Load is not established for this model. [22] | R86242B suits RIDGID 18V users who want both a variable-speed trigger and three-speed selector. The maker lists a 4° angle, 0–20,000 OPM, brushless motor and LED. Its vibration-reduction description is not our measurement, and the angle alone does not establish faster cutting. [25] | PBLMT51B suits ONE+ users wanting a speed dial and lock-on button for extended tasks. The actual official description lists a 3.8° angle, 10,000–20,000 OPM, brushless motor and LED. Choose the selected 51B model rather than transferring specifications from the earlier PBLMT50B. [28] |
| Compatibility | The tool supports Starlock, StarlockPlus and StarlockMax accessories with tool-less changes. Match the blade to the material and exact interface rather than treating every multi-tool blade as interchangeable. The optional dust attachment in the manual is for sanding and must not be used when sanding metal. [2] | The quick-change clamping system works without a wrench for matching accessories. A universal accessory adapter is included, but the manual requires a hex wrench to tighten its nut for non-DEWALT accessories. The maker says most accessory brands; that does not establish compatibility with every StarlockMax blade. [5] | Blade changes use a quick-release lever and a hand-tightened accessory bolt. The manual says an adapter may be necessary if an accessory does not fit snugly on the flange, and identifies separately available 48-03-2526 for certain arbor types. Confirm the exact blade fit rather than assuming StarlockMax snap-in compatibility. [8] | The StarlockMax mount supports Starlock, StarlockPlus and StarlockMax accessories, using QuickIN tool-free changes. FEIN describes a mechanical interface for depth stops and stationary holders. Check the exact additional holder or stop if guided work is part of the plan rather than assuming it is supplied. [11] | Its StarlockMax accessory system accepts Starlock, StarlockPlus and StarlockMax blades. Keyless blade eject is documented. The included depth guide gives this package a distinct accessory choice, but we have not measured plunge accuracy or verified every blade-and-guide combination. [14] | The StarlockMax holder accepts StarlockMax, StarlockPlus and Starlock accessories. Plunge base and depth stops are separate from this Basic package. The manual says a depth stop, dust extraction device and positioning aid mount to an adapter and can be offset in 30° increments. Price the exact accessory system you intend to use. [17] | The snap-in mount accepts Starlock and StarlockPlus accessories, explicitly not StarlockMax. Bosch lists OSC004 depth stop and a separate OSC005 dust collection attachment for sanding only with specified sanding accessories. Match the exact pad and attachment; do not extend that sanding support to cutting dust collection. [20] | The quick-release lever opens the mount, followed by removing and hand-tightening the accessory bolt. Its manual also identifies 48-03-2526 as a separately available adapter for certain arbor types. Match the blade to the flange and any required adapter rather than treating tool-free changes as universal blade fit. [23] | RIDGID documents tool-free accessory changes and says it accepts most multi-tool accessories. Exact interface exclusions and adapter requirements were not established here; confirm the chosen blade with the maker. The included sanding pad provides a starting point for detail sanding, not proof of fit for every aftermarket pad. [26] | RYOBI describes tool-free accessory changes and compatibility with most multi-tool accessories. Exact blade-interface exclusions were not established here, so confirm the specific blade and any adapter. The sanding pad is included; a grout blade is mentioned as an application accessory but is not listed in the supplied package. [29] |
| Form factor | Battery and charger are separate. The manual lists a 12-inch length with BL1820B and 12-5/8 inches with BL1860B, so pack choice changes the space needed behind the tool. This is the selected XMT04ZB, not a battery kit. Budget the optional sanding dust attachment and verify the complete extraction connection. [3] | The B package includes wood-with-nails and fast-cut wood blades plus the adapter. Battery, charger and tool guide system are separate. The manual shows depth and cut guides; budget them if controlling plunge depth matters. A model-matched dust attachment was not established here, so confirm that separately for detail sanding. [6] | It works with M18 batteries; battery and charger are separate. Milwaukee describes vibration dampening, but we do not rank measured vibration or cutting speed. Exact supplied blades and a dedicated dust attachment were not established from the reviewed page, so verify the selected seller package and extraction accessories before buying. [9] | The Top package includes a range of cutting blades, carbide rasp, rigid scraper, perforated sanding pad, sanding sheets, a dust extraction device and L-BOXX 136. Its cord is 16.4 feet. An included dust device does not establish capture efficiency or supply the extractor; confirm the material-specific setup and hose connection. [12] | This kit includes a 2.5Ah battery, 160W fast charger, two 1-1/4-inch plunge blades, depth guide and bag. It uses the FLEX 24V platform. Select the -1A kit rather than the FX4111-Z bare option. A dust collection device is not listed in the kit; confirm a model-matched setup if sanding dust decides the purchase. [15] | The selected Basic package lists a USB 78/32/Bi/OSC blade and SYS3 M 187 Systainer, without battery or charger. It uses 18V BP 18 batteries. The manual shows adapter-mounted extraction connected to a suction hose; the device and suitable extractor require separate planning. We have not measured cut accuracy or dust capture. [18] | The kit lists three plunge blades, a segment blade, rigid scraper, sanding pad, 25 sanding sheets, accessory box and carrying case. OSC004 and OSC005 appear as compatible accessories rather than included items. Bosch lists an 11-inch tool length; allow space for the cord and chosen blade orientation in confined work. [21] | It uses M12 batteries; battery and charger are separate. Vibration isolation is a documented design feature. We do not claim it is the smallest or lightest assembled option: compare the selected battery and blade orientation in the actual recess. Confirm seller box contents and a suitable dust setup, which were not established here. [24] | Battery and charger are separate, with all RIDGID 18V batteries listed compatible. The package includes sanding pad, sandpaper, segment blade and plunge blade. Check assembled head, pack and blade clearance for the recess; we do not reproduce the maker’s percentage size comparison. A matching dust attachment was not established. [27] | The B option is tool only and uses 18V ONE+ batteries, with battery and charger separate. Its described box includes two plunge blades, sanding pad and sandpaper. Check the battery-and-blade arrangement against the work area. A dust collection device is not listed; confirm a suitable attachment before making sanding dust the deciding factor. [30] |
Match blades and controls before comparing speed
Makita, FEIN, FLEX and Festool support Starlock, StarlockPlus and StarlockMax. Bosch GOP40-30C supports Starlock and StarlockPlus but explicitly excludes StarlockMax. The selected DEWALT uses a clamping system and included adapter; using that adapter requires a wrench. Both Milwaukees use a quick-release lever and accessory bolt, with some arbor types needing an additional adapter. [2] [11] [14] [17] [20] [5] [8] [23]
DEWALT and RIDGID combine a selector with a variable-speed trigger. M18 has ten dial settings plus Auto-Load; M12 has twelve settings. FLEX has five presets. These controls describe how you select speed. OPM and oscillation angle alone do not establish which tool cuts faster, so choose around the controls and blades needed for the job. [4] [25] [7] [22] [13]
For tight spaces, include the battery or cord and the blade orientation in the clearance check. Makita’s manual gives different lengths with BL1820B and BL1860B. Bosch lists an 11-inch tool but still needs room for the cord. We have not compared assembled tools in a recess; confirm the specific arrangement rather than choosing by an unverified smallest-tool claim. [3] [21] [24]
Budget guides, sanding equipment and extraction together
FLEX’s selected kit includes a battery, charger and depth guide. Festool Basic includes a blade and Systainer, with battery, charger, plunge base and depth accessories separate. FEIN’s Top package supplies a broad blade and sanding assortment. Compare the exact suffix and package rather than treating every kit from the same family as equivalent. [15] [17] [18] [12]
Dust attachments have specific limits. Makita’s optional attachment is for sanding and its manual excludes metal sanding. Bosch OSC005 is for sanding only with named accessories. FEIN Top includes a dust extraction device; Festool describes a separate adapter-mounted device with a suction-hose connection. Confirm the material, attachment and extractor combination; this comparison does not establish capture efficiency or regulatory compliance. [2] [20] [12] [18]
A sanding pad in the box does not establish a complete dust setup. RIDGID and RYOBI include sanding equipment, but a matching dust device was not established here. Likewise, manufacturer vibration-control descriptions are design features in this guide, not our comfort rankings. Price the approved accessory setup and assess grip, trigger reach and assembled clearance before committing to a battery platform. [26] [27] [30] [1] [24]
How we compared.
Source-based comparison of official US product pages and selected operator manuals read October 3, 2026. Pro Tool Reviews distinguishes Starlock from clamping-style blade changes and explicitly calls its vibration assessment subjective. That attributed context informed our interface-first comparison; it is one editorial source, not owner consensus. Makita XMT04ZB leads for its small barrel, documented battery-dependent dimensions, AVT design and broad Starlock support. Trigger controls, Auto-Load, complete kits and guided-accessory systems give the other picks distinct reasons to choose them. We have not tested cutting speed, vibration, dust capture, accuracy or runtime. Manufacturer features are not our measured results, and ranking is independent of commission.
How we chooseSources
Official product documentation, reviewed October 3, 2026.
Makita · US · Read October 4, 2026
DEWALT · US · Read October 4, 2026
Milwaukee Tool · US · Read October 4, 2026
FEIN · US · Read October 4, 2026
FLEX · US · Read October 4, 2026
Festool · US · Read October 4, 2026
Bosch · US · Read October 4, 2026
Milwaukee Tool · US · Read October 4, 2026
RIDGID · US · Read October 4, 2026
RYOBI · US · Read October 4, 2026
Makita · US · Read October 4, 2026
DEWALT · US · Read October 4, 2026
Milwaukee Tool · US · Read October 4, 2026
Milwaukee Tool · US · Read October 4, 2026
Festool · US · Read October 4, 2026
Pro Tool Reviews · US · Read October 4, 2026
Detailed source notes
- Makita XMT04ZB: XMT04ZB leads for LXT users prioritizing a small barrel and documented accessory fit. Makita lists 10,000–20,000 OPM, a 3.6° total oscillation angle, a speed dial and a lock-on slide switch. Its AVT internal counterbalance is a maker-described vibration feature, not our measured comfort result.
Exact selected US physical multi-tool and package. Stated OPM and oscillation angle are manufacturer specifications, not measured cutting speed or accuracy. Match blade interface and material use to the exact manual; tool-free changes do not establish universal compatibility. Vibration and electronic-control features do not establish measured comfort, runtime, protection or performance. A dust attachment does not establish capture or regulatory compliance; match extraction equipment to the material and attachment scope.
Makita XMT04ZB official product details · /private/tmp/tb234-makita-readable.txt lines535-580,588-619
XMT04ZB leads for LXT users prioritizing a small barrel and documented accessory fit. Makita lists 10,000–20,000 OPM, a 3.6° total oscillation angle, a speed dial and a lock-on slide switch. Its AVT internal counterbalance is a maker-described vibration feature, not our measured comfort result.Checked October 3, 2026
- Makita XMT04ZB: The tool supports Starlock, StarlockPlus and StarlockMax accessories with tool-less changes. Match the blade to the material and exact interface rather than treating every multi-tool blade as interchangeable. The optional dust attachment in the manual is for sanding and must not be used when sanding metal.
Exact selected US physical multi-tool and package. Stated OPM and oscillation angle are manufacturer specifications, not measured cutting speed or accuracy. Match blade interface and material use to the exact manual; tool-free changes do not establish universal compatibility. Vibration and electronic-control features do not establish measured comfort, runtime, protection or performance. A dust attachment does not establish capture or regulatory compliance; match extraction equipment to the material and attachment scope.
Makita XMT04ZB official product details · /private/tmp/tb234-makita-readable.txt lines535-580,588-619
The tool supports Starlock, StarlockPlus and StarlockMax accessories with tool-less changes. Match the blade to the material and exact interface rather than treating every multi-tool blade as interchangeable. The optional dust attachment in the manual is for sanding and must not be used when sanding metal.Makita XMT04ZB operator manual · /private/tmp/tb234-makita-manual-readable.txt lines12-28,715-721
The tool supports Starlock, StarlockPlus and StarlockMax accessories with tool-less changes. Match the blade to the material and exact interface rather than treating every multi-tool blade as interchangeable. The optional dust attachment in the manual is for sanding and must not be used when sanding metal.Checked October 3, 2026
- Makita XMT04ZB: Battery and charger are separate. The manual lists a 12-inch length with BL1820B and 12-5/8 inches with BL1860B, so pack choice changes the space needed behind the tool. This is the selected XMT04ZB, not a battery kit. Budget the optional sanding dust attachment and verify the complete extraction connection.
Exact selected US physical multi-tool and package. Stated OPM and oscillation angle are manufacturer specifications, not measured cutting speed or accuracy. Match blade interface and material use to the exact manual; tool-free changes do not establish universal compatibility. Vibration and electronic-control features do not establish measured comfort, runtime, protection or performance. A dust attachment does not establish capture or regulatory compliance; match extraction equipment to the material and attachment scope.
Makita XMT04ZB official product details · /private/tmp/tb234-makita-readable.txt lines535-580,588-619
Battery and charger are separate. The manual lists a 12-inch length with BL1820B and 12-5/8 inches with BL1860B, so pack choice changes the space needed behind the tool. This is the selected XMT04ZB, not a battery kit. Budget the optional sanding dust attachment and verify the complete extraction connection.Makita XMT04ZB operator manual · /private/tmp/tb234-makita-manual-readable.txt lines12-28,715-721
Battery and charger are separate. The manual lists a 12-inch length with BL1820B and 12-5/8 inches with BL1860B, so pack choice changes the space needed behind the tool. This is the selected XMT04ZB, not a battery kit. Budget the optional sanding dust attachment and verify the complete extraction connection.Checked October 3, 2026
- DEWALT DCS356B: DCS356B suits 20V MAX users who prefer a variable-speed trigger to a slide switch. The three-speed selector sets the range while the DUAL-GRIP trigger controls speed within it. DEWALT lists a brushless motor and LED. Exact oscillation angle and speed ranges were not established in this comparison.
Exact selected US physical multi-tool and package. Stated OPM and oscillation angle are manufacturer specifications, not measured cutting speed or accuracy. Match blade interface and material use to the exact manual; tool-free changes do not establish universal compatibility. Vibration and electronic-control features do not establish measured comfort, runtime, protection or performance. A dust attachment does not establish capture or regulatory compliance; match extraction equipment to the material and attachment scope.
DEWALT DCS356B official product details · /private/tmp/tb234-dewalt-readable.txt lines30-66
DCS356B suits 20V MAX users who prefer a variable-speed trigger to a slide switch. The three-speed selector sets the range while the DUAL-GRIP trigger controls speed within it. DEWALT lists a brushless motor and LED. Exact oscillation angle and speed ranges were not established in this comparison.Checked October 3, 2026
- DEWALT DCS356B: The quick-change clamping system works without a wrench for matching accessories. A universal accessory adapter is included, but the manual requires a hex wrench to tighten its nut for non-DEWALT accessories. The maker says most accessory brands; that does not establish compatibility with every StarlockMax blade.
Exact selected US physical multi-tool and package. Stated OPM and oscillation angle are manufacturer specifications, not measured cutting speed or accuracy. Match blade interface and material use to the exact manual; tool-free changes do not establish universal compatibility. Vibration and electronic-control features do not establish measured comfort, runtime, protection or performance. A dust attachment does not establish capture or regulatory compliance; match extraction equipment to the material and attachment scope.
DEWALT DCS356B official product details · /private/tmp/tb234-dewalt-readable.txt lines30-66
The quick-change clamping system works without a wrench for matching accessories. A universal accessory adapter is included, but the manual requires a hex wrench to tighten its nut for non-DEWALT accessories. The maker says most accessory brands; that does not establish compatibility with every StarlockMax blade.DEWALT DCS356B operator manual · /private/tmp/tb234-dewalt-manual-readable.txt lines903-938,997-1036
The quick-change clamping system works without a wrench for matching accessories. A universal accessory adapter is included, but the manual requires a hex wrench to tighten its nut for non-DEWALT accessories. The maker says most accessory brands; that does not establish compatibility with every StarlockMax blade.Checked October 3, 2026
- DEWALT DCS356B: The B package includes wood-with-nails and fast-cut wood blades plus the adapter. Battery, charger and tool guide system are separate. The manual shows depth and cut guides; budget them if controlling plunge depth matters. A model-matched dust attachment was not established here, so confirm that separately for detail sanding.
Exact selected US physical multi-tool and package. Stated OPM and oscillation angle are manufacturer specifications, not measured cutting speed or accuracy. Match blade interface and material use to the exact manual; tool-free changes do not establish universal compatibility. Vibration and electronic-control features do not establish measured comfort, runtime, protection or performance. A dust attachment does not establish capture or regulatory compliance; match extraction equipment to the material and attachment scope.
DEWALT DCS356B official product details · /private/tmp/tb234-dewalt-readable.txt lines30-66
The B package includes wood-with-nails and fast-cut wood blades plus the adapter. Battery, charger and tool guide system are separate. The manual shows depth and cut guides; budget them if controlling plunge depth matters. A model-matched dust attachment was not established here, so confirm that separately for detail sanding.DEWALT DCS356B operator manual · /private/tmp/tb234-dewalt-manual-readable.txt lines903-938,997-1036
The B package includes wood-with-nails and fast-cut wood blades plus the adapter. Battery, charger and tool guide system are separate. The manual shows depth and cut guides; budget them if controlling plunge depth matters. A model-matched dust attachment was not established here, so confirm that separately for detail sanding.Checked October 3, 2026
- Milwaukee M18 FUEL 2836-20: 2836-20 suits M18 users wanting preset speed control plus Auto-Load. Milwaukee lists 10,000–20,000 OPM, a 4.2° angle and ten dial settings. The manual says Auto-Load starts at 15,000 OPM and increases to 20,000 when loaded. Its slide switch and 180° LED span are documented features.
Exact selected US physical multi-tool and package. Stated OPM and oscillation angle are manufacturer specifications, not measured cutting speed or accuracy. Match blade interface and material use to the exact manual; tool-free changes do not establish universal compatibility. Vibration and electronic-control features do not establish measured comfort, runtime, protection or performance. A dust attachment does not establish capture or regulatory compliance; match extraction equipment to the material and attachment scope.
Milwaukee M18 FUEL 2836-20 official product details · /private/tmp/tb234-m18-readable.txt lines572-601
2836-20 suits M18 users wanting preset speed control plus Auto-Load. Milwaukee lists 10,000–20,000 OPM, a 4.2° angle and ten dial settings. The manual says Auto-Load starts at 15,000 OPM and increases to 20,000 when loaded. Its slide switch and 180° LED span are documented features.Milwaukee M18 FUEL 2836-20 operator manual · /private/tmp/tb234-m18-manual-readable.txt lines278-292,425-445
2836-20 suits M18 users wanting preset speed control plus Auto-Load. Milwaukee lists 10,000–20,000 OPM, a 4.2° angle and ten dial settings. The manual says Auto-Load starts at 15,000 OPM and increases to 20,000 when loaded. Its slide switch and 180° LED span are documented features.Checked October 3, 2026
- Milwaukee M18 FUEL 2836-20: Blade changes use a quick-release lever and a hand-tightened accessory bolt. The manual says an adapter may be necessary if an accessory does not fit snugly on the flange, and identifies separately available 48-03-2526 for certain arbor types. Confirm the exact blade fit rather than assuming StarlockMax snap-in compatibility.
Exact selected US physical multi-tool and package. Stated OPM and oscillation angle are manufacturer specifications, not measured cutting speed or accuracy. Match blade interface and material use to the exact manual; tool-free changes do not establish universal compatibility. Vibration and electronic-control features do not establish measured comfort, runtime, protection or performance. A dust attachment does not establish capture or regulatory compliance; match extraction equipment to the material and attachment scope.
Milwaukee M18 FUEL 2836-20 official product details · /private/tmp/tb234-m18-readable.txt lines572-601
Blade changes use a quick-release lever and a hand-tightened accessory bolt. The manual says an adapter may be necessary if an accessory does not fit snugly on the flange, and identifies separately available 48-03-2526 for certain arbor types. Confirm the exact blade fit rather than assuming StarlockMax snap-in compatibility.Milwaukee M18 FUEL 2836-20 operator manual · /private/tmp/tb234-m18-manual-readable.txt lines278-292,425-445
Blade changes use a quick-release lever and a hand-tightened accessory bolt. The manual says an adapter may be necessary if an accessory does not fit snugly on the flange, and identifies separately available 48-03-2526 for certain arbor types. Confirm the exact blade fit rather than assuming StarlockMax snap-in compatibility.Checked October 3, 2026
- Milwaukee M18 FUEL 2836-20: It works with M18 batteries; battery and charger are separate. Milwaukee describes vibration dampening, but we do not rank measured vibration or cutting speed. Exact supplied blades and a dedicated dust attachment were not established from the reviewed page, so verify the selected seller package and extraction accessories before buying.
Exact selected US physical multi-tool and package. Stated OPM and oscillation angle are manufacturer specifications, not measured cutting speed or accuracy. Match blade interface and material use to the exact manual; tool-free changes do not establish universal compatibility. Vibration and electronic-control features do not establish measured comfort, runtime, protection or performance. A dust attachment does not establish capture or regulatory compliance; match extraction equipment to the material and attachment scope.
Milwaukee M18 FUEL 2836-20 official product details · /private/tmp/tb234-m18-readable.txt lines572-601
It works with M18 batteries; battery and charger are separate. Milwaukee describes vibration dampening, but we do not rank measured vibration or cutting speed. Exact supplied blades and a dedicated dust attachment were not established from the reviewed page, so verify the selected seller package and extraction accessories before buying.Checked October 3, 2026
- FEIN MULTIMASTER MM 700 Max Top: MM 700 Max Top suits a corded renovation station with a broad accessory kit. FEIN specifies 450W power consumption, 10,000–19,500 OPM and an angle of 2 × 2°. Infinitely variable electronic control and an anti-vibration system are documented; the input wattage is not blade output or a cutting-speed result.
Exact selected US physical multi-tool and package. Stated OPM and oscillation angle are manufacturer specifications, not measured cutting speed or accuracy. Match blade interface and material use to the exact manual; tool-free changes do not establish universal compatibility. Vibration and electronic-control features do not establish measured comfort, runtime, protection or performance. A dust attachment does not establish capture or regulatory compliance; match extraction equipment to the material and attachment scope.
FEIN MULTIMASTER MM 700 Max Top official product details · /private/tmp/tb234-fein-readable.txt lines327-406
MM 700 Max Top suits a corded renovation station with a broad accessory kit. FEIN specifies 450W power consumption, 10,000–19,500 OPM and an angle of 2 × 2°. Infinitely variable electronic control and an anti-vibration system are documented; the input wattage is not blade output or a cutting-speed result.Checked October 3, 2026
- FEIN MULTIMASTER MM 700 Max Top: The StarlockMax mount supports Starlock, StarlockPlus and StarlockMax accessories, using QuickIN tool-free changes. FEIN describes a mechanical interface for depth stops and stationary holders. Check the exact additional holder or stop if guided work is part of the plan rather than assuming it is supplied.
Exact selected US physical multi-tool and package. Stated OPM and oscillation angle are manufacturer specifications, not measured cutting speed or accuracy. Match blade interface and material use to the exact manual; tool-free changes do not establish universal compatibility. Vibration and electronic-control features do not establish measured comfort, runtime, protection or performance. A dust attachment does not establish capture or regulatory compliance; match extraction equipment to the material and attachment scope.
FEIN MULTIMASTER MM 700 Max Top official product details · /private/tmp/tb234-fein-readable.txt lines327-406
The StarlockMax mount supports Starlock, StarlockPlus and StarlockMax accessories, using QuickIN tool-free changes. FEIN describes a mechanical interface for depth stops and stationary holders. Check the exact additional holder or stop if guided work is part of the plan rather than assuming it is supplied.Checked October 3, 2026
- FEIN MULTIMASTER MM 700 Max Top: The Top package includes a range of cutting blades, carbide rasp, rigid scraper, perforated sanding pad, sanding sheets, a dust extraction device and L-BOXX 136. Its cord is 16.4 feet. An included dust device does not establish capture efficiency or supply the extractor; confirm the material-specific setup and hose connection.
Exact selected US physical multi-tool and package. Stated OPM and oscillation angle are manufacturer specifications, not measured cutting speed or accuracy. Match blade interface and material use to the exact manual; tool-free changes do not establish universal compatibility. Vibration and electronic-control features do not establish measured comfort, runtime, protection or performance. A dust attachment does not establish capture or regulatory compliance; match extraction equipment to the material and attachment scope.
FEIN MULTIMASTER MM 700 Max Top official product details · /private/tmp/tb234-fein-readable.txt lines327-406
The Top package includes a range of cutting blades, carbide rasp, rigid scraper, perforated sanding pad, sanding sheets, a dust extraction device and L-BOXX 136. Its cord is 16.4 feet. An included dust device does not establish capture efficiency or supply the extractor; confirm the material-specific setup and hose connection.Checked October 3, 2026
- FLEX FX4111-1A Kit: FX4111-1A suits buyers starting a FLEX setup. The brushless tool has five speed settings, 10,000–20,000 no-load OPM and a 4° total angle, stated as ±2°. FLEX lists vibration suppression and an LED; neither establishes our measured handling or cutting result.
Exact selected US physical multi-tool and package. Stated OPM and oscillation angle are manufacturer specifications, not measured cutting speed or accuracy. Match blade interface and material use to the exact manual; tool-free changes do not establish universal compatibility. Vibration and electronic-control features do not establish measured comfort, runtime, protection or performance. A dust attachment does not establish capture or regulatory compliance; match extraction equipment to the material and attachment scope.
FLEX FX4111-1A Kit official product details · /private/tmp/tb234-flex-readable.txt lines75-126
FX4111-1A suits buyers starting a FLEX setup. The brushless tool has five speed settings, 10,000–20,000 no-load OPM and a 4° total angle, stated as ±2°. FLEX lists vibration suppression and an LED; neither establishes our measured handling or cutting result.Checked October 3, 2026
- FLEX FX4111-1A Kit: Its StarlockMax accessory system accepts Starlock, StarlockPlus and StarlockMax blades. Keyless blade eject is documented. The included depth guide gives this package a distinct accessory choice, but we have not measured plunge accuracy or verified every blade-and-guide combination.
Exact selected US physical multi-tool and package. Stated OPM and oscillation angle are manufacturer specifications, not measured cutting speed or accuracy. Match blade interface and material use to the exact manual; tool-free changes do not establish universal compatibility. Vibration and electronic-control features do not establish measured comfort, runtime, protection or performance. A dust attachment does not establish capture or regulatory compliance; match extraction equipment to the material and attachment scope.
FLEX FX4111-1A Kit official product details · /private/tmp/tb234-flex-readable.txt lines75-126
Its StarlockMax accessory system accepts Starlock, StarlockPlus and StarlockMax blades. Keyless blade eject is documented. The included depth guide gives this package a distinct accessory choice, but we have not measured plunge accuracy or verified every blade-and-guide combination.Checked October 3, 2026
- FLEX FX4111-1A Kit: This kit includes a 2.5Ah battery, 160W fast charger, two 1-1/4-inch plunge blades, depth guide and bag. It uses the FLEX 24V platform. Select the -1A kit rather than the FX4111-Z bare option. A dust collection device is not listed in the kit; confirm a model-matched setup if sanding dust decides the purchase.
Exact selected US physical multi-tool and package. Stated OPM and oscillation angle are manufacturer specifications, not measured cutting speed or accuracy. Match blade interface and material use to the exact manual; tool-free changes do not establish universal compatibility. Vibration and electronic-control features do not establish measured comfort, runtime, protection or performance. A dust attachment does not establish capture or regulatory compliance; match extraction equipment to the material and attachment scope.
FLEX FX4111-1A Kit official product details · /private/tmp/tb234-flex-readable.txt lines75-126
This kit includes a 2.5Ah battery, 160W fast charger, two 1-1/4-inch plunge blades, depth guide and bag. It uses the FLEX 24V platform. Select the -1A kit rather than the FX4111-Z bare option. A dust collection device is not listed in the kit; confirm a model-matched setup if sanding dust decides the purchase.Checked October 3, 2026
- Festool VECTURO OSC 18 E-Basic: OSC 18 E-Basic suits buyers who want to build around optional guided-cut accessories. Festool documents a brushless EC-TEC motor, variable-speed control, a 10,000–19,500 min−1 speed range and a 2 × 2° angle. Housing-and-motor vibration isolation is a maker feature, not a measured comfort comparison.
Exact selected US physical multi-tool and package. Stated OPM and oscillation angle are manufacturer specifications, not measured cutting speed or accuracy. Match blade interface and material use to the exact manual; tool-free changes do not establish universal compatibility. Vibration and electronic-control features do not establish measured comfort, runtime, protection or performance. A dust attachment does not establish capture or regulatory compliance; match extraction equipment to the material and attachment scope.
Festool VECTURO OSC 18 E-Basic official product details · /private/tmp/tb234-festool-readable.txt lines531-612 and actual official Basic contains list
OSC 18 E-Basic suits buyers who want to build around optional guided-cut accessories. Festool documents a brushless EC-TEC motor, variable-speed control, a 10,000–19,500 min−1 speed range and a 2 × 2° angle. Housing-and-motor vibration isolation is a maker feature, not a measured comfort comparison.Festool VECTURO OSC 18 E-Basic operator manual · /private/tmp/tb234-festool-manual-readable.txt lines430-465,657-691
OSC 18 E-Basic suits buyers who want to build around optional guided-cut accessories. Festool documents a brushless EC-TEC motor, variable-speed control, a 10,000–19,500 min−1 speed range and a 2 × 2° angle. Housing-and-motor vibration isolation is a maker feature, not a measured comfort comparison.Checked October 3, 2026
- Festool VECTURO OSC 18 E-Basic: The StarlockMax holder accepts StarlockMax, StarlockPlus and Starlock accessories. Plunge base and depth stops are separate from this Basic package. The manual says a depth stop, dust extraction device and positioning aid mount to an adapter and can be offset in 30° increments. Price the exact accessory system you intend to use.
Exact selected US physical multi-tool and package. Stated OPM and oscillation angle are manufacturer specifications, not measured cutting speed or accuracy. Match blade interface and material use to the exact manual; tool-free changes do not establish universal compatibility. Vibration and electronic-control features do not establish measured comfort, runtime, protection or performance. A dust attachment does not establish capture or regulatory compliance; match extraction equipment to the material and attachment scope.
Festool VECTURO OSC 18 E-Basic official product details · /private/tmp/tb234-festool-readable.txt lines531-612 and actual official Basic contains list
The StarlockMax holder accepts StarlockMax, StarlockPlus and Starlock accessories. Plunge base and depth stops are separate from this Basic package. The manual says a depth stop, dust extraction device and positioning aid mount to an adapter and can be offset in 30° increments. Price the exact accessory system you intend to use.Festool VECTURO OSC 18 E-Basic operator manual · /private/tmp/tb234-festool-manual-readable.txt lines430-465,657-691
The StarlockMax holder accepts StarlockMax, StarlockPlus and Starlock accessories. Plunge base and depth stops are separate from this Basic package. The manual says a depth stop, dust extraction device and positioning aid mount to an adapter and can be offset in 30° increments. Price the exact accessory system you intend to use.Checked October 3, 2026
- Festool VECTURO OSC 18 E-Basic: The selected Basic package lists a USB 78/32/Bi/OSC blade and SYS3 M 187 Systainer, without battery or charger. It uses 18V BP 18 batteries. The manual shows adapter-mounted extraction connected to a suction hose; the device and suitable extractor require separate planning. We have not measured cut accuracy or dust capture.
Exact selected US physical multi-tool and package. Stated OPM and oscillation angle are manufacturer specifications, not measured cutting speed or accuracy. Match blade interface and material use to the exact manual; tool-free changes do not establish universal compatibility. Vibration and electronic-control features do not establish measured comfort, runtime, protection or performance. A dust attachment does not establish capture or regulatory compliance; match extraction equipment to the material and attachment scope.
Festool VECTURO OSC 18 E-Basic official product details · /private/tmp/tb234-festool-readable.txt lines531-612 and actual official Basic contains list
The selected Basic package lists a USB 78/32/Bi/OSC blade and SYS3 M 187 Systainer, without battery or charger. It uses 18V BP 18 batteries. The manual shows adapter-mounted extraction connected to a suction hose; the device and suitable extractor require separate planning. We have not measured cut accuracy or dust capture.Festool VECTURO OSC 18 E-Basic operator manual · /private/tmp/tb234-festool-manual-readable.txt lines430-465,657-691
The selected Basic package lists a USB 78/32/Bi/OSC blade and SYS3 M 187 Systainer, without battery or charger. It uses 18V BP 18 batteries. The manual shows adapter-mounted extraction connected to a suction hose; the device and suitable extractor require separate planning. We have not measured cut accuracy or dust capture.Checked October 3, 2026
- Bosch GOP40-30C: GOP40-30C suits a corded setup where StarlockPlus blades and a documented sanding attachment are enough. Bosch lists a 4A, 120V motor, a 3° angle, 8,000–20,000 OPM and a variable-speed dial. The slide switch, LED and ball-joint cord swivel are useful layout distinctions; no tested cutting advantage is claimed here.
Exact selected US physical multi-tool and package. Stated OPM and oscillation angle are manufacturer specifications, not measured cutting speed or accuracy. Match blade interface and material use to the exact manual; tool-free changes do not establish universal compatibility. Vibration and electronic-control features do not establish measured comfort, runtime, protection or performance. A dust attachment does not establish capture or regulatory compliance; match extraction equipment to the material and attachment scope.
Bosch GOP40-30C official product details · Actual official US web body lines406-506 at https://www.boschtools.com/us/en/products/gop40-30c-0601231011
GOP40-30C suits a corded setup where StarlockPlus blades and a documented sanding attachment are enough. Bosch lists a 4A, 120V motor, a 3° angle, 8,000–20,000 OPM and a variable-speed dial. The slide switch, LED and ball-joint cord swivel are useful layout distinctions; no tested cutting advantage is claimed here.Checked October 3, 2026
- Bosch GOP40-30C: The snap-in mount accepts Starlock and StarlockPlus accessories, explicitly not StarlockMax. Bosch lists OSC004 depth stop and a separate OSC005 dust collection attachment for sanding only with specified sanding accessories. Match the exact pad and attachment; do not extend that sanding support to cutting dust collection.
Exact selected US physical multi-tool and package. Stated OPM and oscillation angle are manufacturer specifications, not measured cutting speed or accuracy. Match blade interface and material use to the exact manual; tool-free changes do not establish universal compatibility. Vibration and electronic-control features do not establish measured comfort, runtime, protection or performance. A dust attachment does not establish capture or regulatory compliance; match extraction equipment to the material and attachment scope.
Bosch GOP40-30C official product details · Actual official US web body lines406-506 at https://www.boschtools.com/us/en/products/gop40-30c-0601231011
The snap-in mount accepts Starlock and StarlockPlus accessories, explicitly not StarlockMax. Bosch lists OSC004 depth stop and a separate OSC005 dust collection attachment for sanding only with specified sanding accessories. Match the exact pad and attachment; do not extend that sanding support to cutting dust collection.Checked October 3, 2026
- Bosch GOP40-30C: The kit lists three plunge blades, a segment blade, rigid scraper, sanding pad, 25 sanding sheets, accessory box and carrying case. OSC004 and OSC005 appear as compatible accessories rather than included items. Bosch lists an 11-inch tool length; allow space for the cord and chosen blade orientation in confined work.
Exact selected US physical multi-tool and package. Stated OPM and oscillation angle are manufacturer specifications, not measured cutting speed or accuracy. Match blade interface and material use to the exact manual; tool-free changes do not establish universal compatibility. Vibration and electronic-control features do not establish measured comfort, runtime, protection or performance. A dust attachment does not establish capture or regulatory compliance; match extraction equipment to the material and attachment scope.
Bosch GOP40-30C official product details · Actual official US web body lines406-506 at https://www.boschtools.com/us/en/products/gop40-30c-0601231011
The kit lists three plunge blades, a segment blade, rigid scraper, sanding pad, 25 sanding sheets, accessory box and carrying case. OSC004 and OSC005 appear as compatible accessories rather than included items. Bosch lists an 11-inch tool length; allow space for the cord and chosen blade orientation in confined work.Checked October 3, 2026
- Milwaukee M12 FUEL 2526-20: 2526-20 suits an existing M12 tool setup and a buyer wanting twelve dial settings. Milwaukee lists a brushless motor, 10,000–20,000 OPM, a 3.9° angle and an LED. The manual documents a slide switch. Unlike the selected M18 pick, Auto-Load is not established for this model.
Exact selected US physical multi-tool and package. Stated OPM and oscillation angle are manufacturer specifications, not measured cutting speed or accuracy. Match blade interface and material use to the exact manual; tool-free changes do not establish universal compatibility. Vibration and electronic-control features do not establish measured comfort, runtime, protection or performance. A dust attachment does not establish capture or regulatory compliance; match extraction equipment to the material and attachment scope.
Milwaukee M12 FUEL 2526-20 official product details · /private/tmp/tb234-m12-readable.txt lines572-598
2526-20 suits an existing M12 tool setup and a buyer wanting twelve dial settings. Milwaukee lists a brushless motor, 10,000–20,000 OPM, a 3.9° angle and an LED. The manual documents a slide switch. Unlike the selected M18 pick, Auto-Load is not established for this model.Milwaukee M12 FUEL 2526-20 operator manual · /private/tmp/tb234-m12-manual-readable.txt lines291-306,356-379
2526-20 suits an existing M12 tool setup and a buyer wanting twelve dial settings. Milwaukee lists a brushless motor, 10,000–20,000 OPM, a 3.9° angle and an LED. The manual documents a slide switch. Unlike the selected M18 pick, Auto-Load is not established for this model.Checked October 3, 2026
- Milwaukee M12 FUEL 2526-20: The quick-release lever opens the mount, followed by removing and hand-tightening the accessory bolt. Its manual also identifies 48-03-2526 as a separately available adapter for certain arbor types. Match the blade to the flange and any required adapter rather than treating tool-free changes as universal blade fit.
Exact selected US physical multi-tool and package. Stated OPM and oscillation angle are manufacturer specifications, not measured cutting speed or accuracy. Match blade interface and material use to the exact manual; tool-free changes do not establish universal compatibility. Vibration and electronic-control features do not establish measured comfort, runtime, protection or performance. A dust attachment does not establish capture or regulatory compliance; match extraction equipment to the material and attachment scope.
Milwaukee M12 FUEL 2526-20 official product details · /private/tmp/tb234-m12-readable.txt lines572-598
The quick-release lever opens the mount, followed by removing and hand-tightening the accessory bolt. Its manual also identifies 48-03-2526 as a separately available adapter for certain arbor types. Match the blade to the flange and any required adapter rather than treating tool-free changes as universal blade fit.Milwaukee M12 FUEL 2526-20 operator manual · /private/tmp/tb234-m12-manual-readable.txt lines291-306,356-379
The quick-release lever opens the mount, followed by removing and hand-tightening the accessory bolt. Its manual also identifies 48-03-2526 as a separately available adapter for certain arbor types. Match the blade to the flange and any required adapter rather than treating tool-free changes as universal blade fit.Checked October 3, 2026
- Milwaukee M12 FUEL 2526-20: It uses M12 batteries; battery and charger are separate. Vibration isolation is a documented design feature. We do not claim it is the smallest or lightest assembled option: compare the selected battery and blade orientation in the actual recess. Confirm seller box contents and a suitable dust setup, which were not established here.
Exact selected US physical multi-tool and package. Stated OPM and oscillation angle are manufacturer specifications, not measured cutting speed or accuracy. Match blade interface and material use to the exact manual; tool-free changes do not establish universal compatibility. Vibration and electronic-control features do not establish measured comfort, runtime, protection or performance. A dust attachment does not establish capture or regulatory compliance; match extraction equipment to the material and attachment scope.
Milwaukee M12 FUEL 2526-20 official product details · /private/tmp/tb234-m12-readable.txt lines572-598
It uses M12 batteries; battery and charger are separate. Vibration isolation is a documented design feature. We do not claim it is the smallest or lightest assembled option: compare the selected battery and blade orientation in the actual recess. Confirm seller box contents and a suitable dust setup, which were not established here.Checked October 3, 2026
- RIDGID R86242B: R86242B suits RIDGID 18V users who want both a variable-speed trigger and three-speed selector. The maker lists a 4° angle, 0–20,000 OPM, brushless motor and LED. Its vibration-reduction description is not our measurement, and the angle alone does not establish faster cutting.
Exact selected US physical multi-tool and package. Stated OPM and oscillation angle are manufacturer specifications, not measured cutting speed or accuracy. Match blade interface and material use to the exact manual; tool-free changes do not establish universal compatibility. Vibration and electronic-control features do not establish measured comfort, runtime, protection or performance. A dust attachment does not establish capture or regulatory compliance; match extraction equipment to the material and attachment scope.
RIDGID R86242B official product details · Actual official RIDGID US web body lines184-248 at https://www.ridgid.com/us/en/r86242b
R86242B suits RIDGID 18V users who want both a variable-speed trigger and three-speed selector. The maker lists a 4° angle, 0–20,000 OPM, brushless motor and LED. Its vibration-reduction description is not our measurement, and the angle alone does not establish faster cutting.Checked October 3, 2026
- RIDGID R86242B: RIDGID documents tool-free accessory changes and says it accepts most multi-tool accessories. Exact interface exclusions and adapter requirements were not established here; confirm the chosen blade with the maker. The included sanding pad provides a starting point for detail sanding, not proof of fit for every aftermarket pad.
Exact selected US physical multi-tool and package. Stated OPM and oscillation angle are manufacturer specifications, not measured cutting speed or accuracy. Match blade interface and material use to the exact manual; tool-free changes do not establish universal compatibility. Vibration and electronic-control features do not establish measured comfort, runtime, protection or performance. A dust attachment does not establish capture or regulatory compliance; match extraction equipment to the material and attachment scope.
RIDGID R86242B official product details · Actual official RIDGID US web body lines184-248 at https://www.ridgid.com/us/en/r86242b
RIDGID documents tool-free accessory changes and says it accepts most multi-tool accessories. Exact interface exclusions and adapter requirements were not established here; confirm the chosen blade with the maker. The included sanding pad provides a starting point for detail sanding, not proof of fit for every aftermarket pad.Checked October 3, 2026
- RIDGID R86242B: Battery and charger are separate, with all RIDGID 18V batteries listed compatible. The package includes sanding pad, sandpaper, segment blade and plunge blade. Check assembled head, pack and blade clearance for the recess; we do not reproduce the maker’s percentage size comparison. A matching dust attachment was not established.
Exact selected US physical multi-tool and package. Stated OPM and oscillation angle are manufacturer specifications, not measured cutting speed or accuracy. Match blade interface and material use to the exact manual; tool-free changes do not establish universal compatibility. Vibration and electronic-control features do not establish measured comfort, runtime, protection or performance. A dust attachment does not establish capture or regulatory compliance; match extraction equipment to the material and attachment scope.
RIDGID R86242B official product details · Actual official RIDGID US web body lines184-248 at https://www.ridgid.com/us/en/r86242b
Battery and charger are separate, with all RIDGID 18V batteries listed compatible. The package includes sanding pad, sandpaper, segment blade and plunge blade. Check assembled head, pack and blade clearance for the recess; we do not reproduce the maker’s percentage size comparison. A matching dust attachment was not established.Checked October 3, 2026
- RYOBI PBLMT51B ONE+ HP: PBLMT51B suits ONE+ users wanting a speed dial and lock-on button for extended tasks. The actual official description lists a 3.8° angle, 10,000–20,000 OPM, brushless motor and LED. Choose the selected 51B model rather than transferring specifications from the earlier PBLMT50B.
Exact selected US physical multi-tool and package. Stated OPM and oscillation angle are manufacturer specifications, not measured cutting speed or accuracy. Match blade interface and material use to the exact manual; tool-free changes do not establish universal compatibility. Vibration and electronic-control features do not establish measured comfort, runtime, protection or performance. A dust attachment does not establish capture or regulatory compliance; match extraction equipment to the material and attachment scope.
RYOBI PBLMT51B ONE+ HP official product details · /private/tmp/tb234-ryobi-readable.txt plus actual embedded description /private/tmp/tb234-ryobi-detail-readable.txt first2lines
PBLMT51B suits ONE+ users wanting a speed dial and lock-on button for extended tasks. The actual official description lists a 3.8° angle, 10,000–20,000 OPM, brushless motor and LED. Choose the selected 51B model rather than transferring specifications from the earlier PBLMT50B.Checked October 3, 2026
- RYOBI PBLMT51B ONE+ HP: RYOBI describes tool-free accessory changes and compatibility with most multi-tool accessories. Exact blade-interface exclusions were not established here, so confirm the specific blade and any adapter. The sanding pad is included; a grout blade is mentioned as an application accessory but is not listed in the supplied package.
Exact selected US physical multi-tool and package. Stated OPM and oscillation angle are manufacturer specifications, not measured cutting speed or accuracy. Match blade interface and material use to the exact manual; tool-free changes do not establish universal compatibility. Vibration and electronic-control features do not establish measured comfort, runtime, protection or performance. A dust attachment does not establish capture or regulatory compliance; match extraction equipment to the material and attachment scope.
RYOBI PBLMT51B ONE+ HP official product details · /private/tmp/tb234-ryobi-readable.txt plus actual embedded description /private/tmp/tb234-ryobi-detail-readable.txt first2lines
RYOBI describes tool-free accessory changes and compatibility with most multi-tool accessories. Exact blade-interface exclusions were not established here, so confirm the specific blade and any adapter. The sanding pad is included; a grout blade is mentioned as an application accessory but is not listed in the supplied package.Checked October 3, 2026
- RYOBI PBLMT51B ONE+ HP: The B option is tool only and uses 18V ONE+ batteries, with battery and charger separate. Its described box includes two plunge blades, sanding pad and sandpaper. Check the battery-and-blade arrangement against the work area. A dust collection device is not listed; confirm a suitable attachment before making sanding dust the deciding factor.
Exact selected US physical multi-tool and package. Stated OPM and oscillation angle are manufacturer specifications, not measured cutting speed or accuracy. Match blade interface and material use to the exact manual; tool-free changes do not establish universal compatibility. Vibration and electronic-control features do not establish measured comfort, runtime, protection or performance. A dust attachment does not establish capture or regulatory compliance; match extraction equipment to the material and attachment scope.
RYOBI PBLMT51B ONE+ HP official product details · /private/tmp/tb234-ryobi-readable.txt plus actual embedded description /private/tmp/tb234-ryobi-detail-readable.txt first2lines
The B option is tool only and uses 18V ONE+ batteries, with battery and charger separate. Its described box includes two plunge blades, sanding pad and sandpaper. Check the battery-and-blade arrangement against the work area. A dust collection device is not listed; confirm a suitable attachment before making sanding dust the deciding factor.Checked October 3, 2026