Our top 10, at a glance.

Match the vehicle attachment, phone-and-case fit and retention mechanism before buying a mount.

  1. #1Bulletpoint AMPS articulating kitBest fixed-base starting point
  2. #2RAM Mounts RAM-B-400-HOL-UN7BUBest rail-clamp option
  3. #3ProClip USA 511479Best fitted cradle with a vehicle-specific base
  4. #4Quad Lock Heavy Duty Suction MountBest case-lock suction alternative
  5. #5OFFROAM EE20164Best model-specific magnetic option if stocked
  6. #6iOttie Easy One Touch6 Dash & WindshieldBest broad-fit suction cradle
  7. #7Peak Design Car MountBest low-profile adhesive magnetic choice
  8. #8Peak Design Car Vent MountBest offset magnetic vent alternative
  9. #9iOttie Easy One Touch6 Vehicle ScreenBest screen-back cradle placement
  10. #10WeatherTech CupFone8ACF1Best cup-holder cradle option

All 10 picks, in order.

  1. #1

    Best fixed-base starting point

    Bulletpoint AMPS articulating kit

    A buyer willing to drill a suitable mounting panel.

    Why it fits

    • A screwed base and adjustable arm give a deliberate installation path. [1] [2] [3]

    Before you choose

    • Four holes are required; confirm panel access and the kit’s exact holder fit. [1] [2] [3]

    Check before buying:

    • Check the actual vehicle, phone with case, mounting instructions and installed visibility; rough-road retention is not independently measured.

    Model: AMPS articulating kit · Universal holder, articulating arm and AMPS base · US

    Check current details at Bulletpoint ↗

    Find on Amazon ↗

  2. #2

    Best rail-clamp option

    RAM Mounts RAM-B-400-HOL-UN7BU

    Vehicles with a suitable accessible rail or bar.

    Why it fits

    • The clamp and supplied tether provide a different retention arrangement from suction or adhesive bases. [4] [5] [6]

    Before you choose

    • A suitable rail and a phone within the listed range are required; capacity is maker-stated, not our rough-road result. [4] [5] [6]

    Check before buying:

    • Check the actual vehicle, phone with case, mounting instructions and installed visibility; rough-road retention is not independently measured.

    Model: RAM-B-400-HOL-UN7BU · X-Grip with small Tough-Claw and medium arm · US

    Check current details at RAM Mounts ↗

    Find on Amazon ↗

  3. #3

    Best fitted cradle with a vehicle-specific base

    ProClip USA 511479

    Owners prepared to select a base for their actual vehicle and adjust the cradle to the case.

    Why it fits

    • The defined case dimensions support a deliberate fitted-cradle setup. [7] [8] [9]

    Before you choose

    • The holder alone does not attach to every car; measure the phone with its case and choose the separate base. [7] [8] [9]

    Check before buying:

    • Check the actual vehicle, phone with case, mounting instructions and installed visibility; rough-road retention is not independently measured.

    Model: 511479 · Adjustable rugged-case holder; vehicle base separate · US

    Check current details at ProClip USA ↗

    Find on Amazon ↗

  4. #4

    Best case-lock suction alternative

    Quad Lock Heavy Duty Suction Mount

    A car with a suitable smooth mounting surface and a compatible case.

    Why it fits

    • The twist-lock phone connection and adjustable arm differ from magnetic-only retention. [10] [11] [12]

    Before you choose

    • The suction base still depends on surface fit; exclusions include ATVs and high-frequency engine vibration. [10] [11] [12]

    Check before buying:

    • Check the actual vehicle, phone with case, mounting instructions and installed visibility; rough-road retention is not independently measured.

    Model: Heavy Duty Suction Mount · Standard twist-lock head, without charging add-ons · US

    Check current details at Quad Lock ↗

    Find on Amazon ↗

  5. #5

    Best model-specific magnetic option if stocked

    OFFROAM EE20164

    Land Cruiser250 owners with the exact supported dashboard.

    Why it fits

    • The vehicle-specific kit offers a defined fit instead of a generic vent or suction attachment. [13] [14] [15]

    Before you choose

    • Only the listed vehicle/dashboard fits; the page showed sold-out labeling during research, so confirm current stock and selected variant. [13] [14] [15]

    Check before buying:

    • Check the actual vehicle, phone with case, mounting instructions and installed visibility; rough-road retention is not independently measured.

    Model: EE20164 · Land Cruiser250 MagSafe-compatible, non-charging · US

    Check current details at OFFROAM ↗

    Find on Amazon ↗

  6. #6

    Best broad-fit suction cradle

    iOttie Easy One Touch6 Dash & Windshield

    Drivers wanting an ordinary cradle without adopting a case ecosystem.

    Why it fits

    • The self-centering arms and adjustable foot offer a straightforward alternative to case-specific mounts. [16] [17] [18]

    Before you choose

    • Confirm suction-surface and case fit; the maker’s rough-road wording is not our retention test. [16] [17] [18]

    Check before buying:

    • Check the actual vehicle, phone with case, mounting instructions and installed visibility; rough-road retention is not independently measured.

    Model: Easy One Touch6 Dash & Windshield · Non-wireless-charging dash/windshield mount · US

    Check current details at iOttie ↗

    Find on Amazon ↗

  7. #7

    Best low-profile adhesive magnetic choice

    Peak Design Car Mount

    Owners with a compatible magnetic case and a suitable smooth dash surface.

    Why it fits

    • Adhesive placement and a small ballhead offer a compact magnetic layout. [19] [20] [21]

    Before you choose

    • It uses magnetic retention and adhesive surface preparation; no mechanical phone lock or tested off-road retention is claimed. [19] [20] [21]

    Check before buying:

    • Check the actual vehicle, phone with case, mounting instructions and installed visibility; rough-road retention is not independently measured.

    Model: Car Mount · Non-Charging adhesive model · US

    Check current details at Peak Design ↗

    Find on Amazon ↗

  8. #8

    Best offset magnetic vent alternative

    Peak Design Car Vent Mount

    A vehicle with a compatible vent and a buyer avoiding dash adhesive.

    Why it fits

    • Two vent connections and the swivel arm give it a different placement design from a single vent clip. [22] [23] [24]

    Before you choose

    • Vent shape must be checked; the phone connection remains magnetic, and no off-road performance is independently established. [22] [23] [24]

    Check before buying:

    • Check the actual vehicle, phone with case, mounting instructions and installed visibility; rough-road retention is not independently measured.

    Model: Car Vent Mount · Non-Charging vent model · US

    Check current details at Peak Design ↗

    Find on Amazon ↗

  9. #9

    Best screen-back cradle placement

    iOttie Easy One Touch6 Vehicle Screen

    Vehicles with a suitable flat screen back where other mounting positions are poor.

    Why it fits

    • The screen-back attachment creates a distinct placement option while retaining a physical cradle. [25] [26] [27]

    Before you choose

    • Confirm the screen is suitable and the installed position leaves required controls and view clear; adhesive installation is semi-permanent. [25] [26] [27]

    Check before buying:

    • Check the actual vehicle, phone with case, mounting instructions and installed visibility; rough-road retention is not independently measured.

    Model: Easy One Touch6 Vehicle Screen · Non-wireless-charging screen-back mount · US

    Check current details at iOttie ↗

    Find on Amazon ↗

  10. #10

    Best cup-holder cradle option

    WeatherTech CupFone8ACF1

    Vehicles with a useful cup-holder location and no good dash or vent surface.

    Why it fits

    • Interchangeable cups avoid mounting to the dashboard, windshield or vent. [28] [29] [30]

    Before you choose

    • It occupies a cup holder and the standard head is portrait-only; actual cup-holder fit and viewing location need checking. [28] [29] [30]

    Check before buying:

    • Check the actual vehicle, phone with case, mounting instructions and installed visibility; rough-road retention is not independently measured.

    Model: CupFone8ACF1 · Standard portrait CupFone · US

    Check current details at WeatherTech ↗

    Find on Amazon ↗

The details, side by side.

Published specifications and features
What matters#1Bulletpoint AMPS articulating kit#2RAM Mounts RAM-B-400-HOL-UN7BU#3ProClip USA 511479#4Quad Lock Heavy Duty Suction Mount#5OFFROAM EE20164#6iOttie Easy One Touch6 Dash & Windshield#7Peak Design Car Mount#8Peak Design Car Vent Mount#9iOttie Easy One Touch6 Vehicle Screen#10WeatherTech CupFone8ACF1
CompatibilityFour drilled holes are required to secure the AMPS base to a sturdy panel; base uses a 20mm ball. [1]Phone width1.875–3.25 inches and depth up to0.875 inch; clamp fits0.625–1.14-inch-diameter rails. [4]Adjustable width75–89mm and case thickness8–13mm; vehicle-specific mounting base is a separate part. [7]Needs a Quad Lock case or universal adapter and a smooth non-porous surface; base does not fit the smaller Dash Pad. [10]Maker specifies Toyota Land Cruiser250 model years2024–2027 with OEM dashboard, excluding third-party dashboard modifications; MagSafe-equipped phone or case required. [13]Suction base for dashboard or windshield; adjustable bottom foot provides four additional height settings. [16]Works with Peak Design case/adapter or MagSafe phones/cases; best attachment surfaces are flat, hard, non-porous and non-textured. [19]Compatible with many but not all car vents; Peak Design case/adapter or MagSafe phone/case required. [22]Semi-permanent adhesive base installs behind a flat vehicle screen; bottom foot has four additional height settings. [25]Standard model fits phones2.37–3.37 inches wide and up to0.56 inch deep; interchangeable base cups fit many vehicle cup holders. [28]
PowerMechanical holder kit; no integrated charger is selected. [2]Passive mechanical holder; no charger included in this selected kit. [5]Non-charging holder; separate chargers are offered as add-ons. [8]Standard twist-lock version; magnetic and wireless charging heads are optional, not included. [11]Select Non-Charging; Qi2 charging is a separate variant. [14]Non-wireless-charging mount with a cord organizer; charge the phone separately. [17]Select Non-Charging rather than Qi1/Qi2 charging variants. [20]Select Non-Charging; Qi2 is a separate powered variant. [23]Non-wireless-charging mount keeps a separate charging cord in its organizer. [26]No built-in wireless charging selected; the holder leaves access for a phone charging cable. [29]
OperationArticulating arm adjusts with an integrated thumbscrew; the separate universal-holder page lists spring-loaded jaws with rubber pads, up to 4 inches wide and 0.5 inch thick. [3]Three-inch socket-to-socket arm; optional tether supplied; maker lists a1-pound heavy-duty capacity. [6]One-time width adjustment,15-degree tilt/swivel and portrait/landscape rotation. [9]Lever suction base and dual-pivot arm; maker does not recommend it for motorcycles, scooters, ATVs or high-frequency engine vibration. [12]Package lists vehicle-specific base, installation hex key, regular articulating arm and non-charging magnetic holder. [15]Trigger closes self-centering cradle arms; telescopic arm adjusts position. [18]3M VHB adhesive attachment to dash/console, magnetic SlimLink connection and aluminum ballhead adjustment. [21]Vent attachment has two connection points;360-degree swivel arm, magnetic SlimLink attachment and adjustable ballhead. [24]Self-centering cradle arms, adjustable arm/cradle and a detachable adhesive base. [27]Adjustable portrait viewing; Two View is a different model for landscape operation. [30]

Vehicle attachment and phone retention are separate choices

Bulletpoint requires four drilled holes. RAM’s selected clamp needs a rail within its diameter range. ProClip511479 is a holder that still needs a separate vehicle base. A locked or fitted phone connection cannot solve an unsuitable mounting location. [1] [2] [3] [4] [5] [6] [7] [8] [9]

Measure the phone with its case

RAM’s selected X-Grip stops at3.25 inches wide. ProClip511479 lists75–89mm width and8–13mm case thickness. The standard CupFone has a different range. Quad Lock requires its case or adapter; the selected Peak Design models can use compatible magnetic cases. Check the exact model and connection. [4] [5] [6] [7] [8] [9] [10] [11] [12] [19] [20] [21] [22] [23] [24] [28] [29] [30]

Keep convenience options conditional

Peak Design vent fit is not universal, and its adhesive model works best on hard smooth surfaces. iOttie’s screen mount attaches behind a suitable flat screen. OFFROAM’s listed LandCruiser kit requires the specified OEM dashboard and showed sold-out labeling during research. None of those facts proves rough-road retention in your vehicle. [13] [14] [15] [19] [20] [21] [22] [23] [24] [25] [26] [27]

How we compared.

Source-based research reviewed September30,2026. Actual LandCruiser250 owner comments describe different placement preferences and one individual’s repeated mount failures; they do not establish model-specific reliability or consensus. Maker pages and instructions supply dimensions, mounting requirements and selected variants. We did not install, shake-test or drive with these mounts. Ranking prioritizes deliberate fixed or clamp installations and fitted/locking holders, then convenient suction, magnetic and alternative placements. Rough-road performance remains unmeasured. Vehicle-specific and sold-out picks are conditional; no camera-vibration protection or universally safe placement is promised.

How we choose

Sources

Official product documentation, reviewed September 30, 2026.

Bulletpoint AMPS articulating kit actual maker facts ↗

Bulletpoint · US · Read October 1, 2026

RAM Mounts RAM-B-400-HOL-UN7BU actual maker facts ↗

RAM Mounts · US · Read October 1, 2026

ProClip USA 511479 actual maker facts ↗

ProClip USA · US · Read October 1, 2026

Quad Lock Heavy Duty Suction Mount actual maker facts ↗

Quad Lock · US · Read October 1, 2026

OFFROAM EE20164 actual maker facts ↗

OFFROAM · US · Read October 1, 2026

Peak Design Car Mount actual maker facts ↗

Peak Design · US · Read October 1, 2026

Peak Design Car Vent Mount actual maker facts ↗

Peak Design · US · Read October 1, 2026

WeatherTech CupFone8ACF1 actual maker facts ↗

WeatherTech · US · Read October 1, 2026

Bulletpoint universal holder dimensions ↗

Reddit r/LandCruiser250 commenters · US · Read October 1, 2026

Individual vehicle-mount placement reports ↗

Reddit r/LandCruiser250 commenters · US · Read October 1, 2026

Detailed source notes
  1. Bulletpoint AMPS articulating kit: Four drilled holes are required to secure the AMPS base to a sturdy panel; base uses a 20mm ball.

    Exact selected non-charging variant and mounting arrangement. Maker-stated dimensions and mechanisms; no hands-on retention or vibration-protection result. Verify case, vehicle and surface fit.

    Bulletpoint AMPS articulating kit actual maker facts · Actual selected maker page compatibility, specifications, installation and variant descriptions.
    Four drilled holes are required to secure the AMPS base to a sturdy panel; base uses a 20mm ball.

    Checked September 30, 2026

  2. Bulletpoint AMPS articulating kit: Mechanical holder kit; no integrated charger is selected.

    Exact selected non-charging variant and mounting arrangement. Maker-stated dimensions and mechanisms; no hands-on retention or vibration-protection result. Verify case, vehicle and surface fit.

    Bulletpoint AMPS articulating kit actual maker facts · Actual selected maker page compatibility, specifications, installation and variant descriptions.
    Mechanical holder kit; no integrated charger is selected.

    Checked September 30, 2026

  3. Bulletpoint AMPS articulating kit: Articulating arm adjusts with an integrated thumbscrew; the separate universal-holder page lists spring-loaded jaws with rubber pads, up to 4 inches wide and 0.5 inch thick.

    Exact selected non-charging variant and mounting arrangement. Maker-stated dimensions and mechanisms; no hands-on retention or vibration-protection result. Verify case, vehicle and surface fit.

    Bulletpoint AMPS articulating kit actual maker facts · Actual selected maker page compatibility, specifications, installation and variant descriptions.
    Articulating arm adjusts with an integrated thumbscrew; the separate universal-holder page lists spring-loaded jaws with rubber pads, up to 4 inches wide and 0.5 inch thick.

    Bulletpoint universal holder dimensions · Holder FEATURES and PHONE COMPATIBILITY
    Spring jaws and rubber pads; phone limit4 inches wide and0.5 inch thick.

    Checked September 30, 2026

  4. RAM Mounts RAM-B-400-HOL-UN7BU: Phone width1.875–3.25 inches and depth up to0.875 inch; clamp fits0.625–1.14-inch-diameter rails.

    Exact selected non-charging variant and mounting arrangement. Maker-stated dimensions and mechanisms; no hands-on retention or vibration-protection result. Verify case, vehicle and surface fit.

    RAM Mounts RAM-B-400-HOL-UN7BU actual maker facts · Actual selected maker page compatibility, specifications, installation and variant descriptions.
    Phone width1.875–3.25 inches and depth up to0.875 inch; clamp fits0.625–1.14-inch-diameter rails.

    Checked September 30, 2026

  5. RAM Mounts RAM-B-400-HOL-UN7BU: Passive mechanical holder; no charger included in this selected kit.

    Exact selected non-charging variant and mounting arrangement. Maker-stated dimensions and mechanisms; no hands-on retention or vibration-protection result. Verify case, vehicle and surface fit.

    RAM Mounts RAM-B-400-HOL-UN7BU actual maker facts · Actual selected maker page compatibility, specifications, installation and variant descriptions.
    Passive mechanical holder; no charger included in this selected kit.

    Checked September 30, 2026

  6. RAM Mounts RAM-B-400-HOL-UN7BU: Three-inch socket-to-socket arm; optional tether supplied; maker lists a1-pound heavy-duty capacity.

    Exact selected non-charging variant and mounting arrangement. Maker-stated dimensions and mechanisms; no hands-on retention or vibration-protection result. Verify case, vehicle and surface fit.

    RAM Mounts RAM-B-400-HOL-UN7BU actual maker facts · Actual selected maker page compatibility, specifications, installation and variant descriptions.
    Three-inch socket-to-socket arm; optional tether supplied; maker lists a1-pound heavy-duty capacity.

    Checked September 30, 2026

  7. ProClip USA 511479: Adjustable width75–89mm and case thickness8–13mm; vehicle-specific mounting base is a separate part.

    Exact selected non-charging variant and mounting arrangement. Maker-stated dimensions and mechanisms; no hands-on retention or vibration-protection result. Verify case, vehicle and surface fit.

    ProClip USA 511479 actual maker facts · Actual selected maker page compatibility, specifications, installation and variant descriptions.
    Adjustable width75–89mm and case thickness8–13mm; vehicle-specific mounting base is a separate part.

    Checked September 30, 2026

  8. ProClip USA 511479: Non-charging holder; separate chargers are offered as add-ons.

    Exact selected non-charging variant and mounting arrangement. Maker-stated dimensions and mechanisms; no hands-on retention or vibration-protection result. Verify case, vehicle and surface fit.

    ProClip USA 511479 actual maker facts · Actual selected maker page compatibility, specifications, installation and variant descriptions.
    Non-charging holder; separate chargers are offered as add-ons.

    Checked September 30, 2026

  9. ProClip USA 511479: One-time width adjustment,15-degree tilt/swivel and portrait/landscape rotation.

    Exact selected non-charging variant and mounting arrangement. Maker-stated dimensions and mechanisms; no hands-on retention or vibration-protection result. Verify case, vehicle and surface fit.

    ProClip USA 511479 actual maker facts · Actual selected maker page compatibility, specifications, installation and variant descriptions.
    One-time width adjustment,15-degree tilt/swivel and portrait/landscape rotation.

    Checked September 30, 2026

  10. Quad Lock Heavy Duty Suction Mount: Needs a Quad Lock case or universal adapter and a smooth non-porous surface; base does not fit the smaller Dash Pad.

    Exact selected non-charging variant and mounting arrangement. Maker-stated dimensions and mechanisms; no hands-on retention or vibration-protection result. Verify case, vehicle and surface fit.

    Quad Lock Heavy Duty Suction Mount actual maker facts · Actual selected maker page compatibility, specifications, installation and variant descriptions.
    Needs a Quad Lock case or universal adapter and a smooth non-porous surface; base does not fit the smaller Dash Pad.

    Checked September 30, 2026

  11. Quad Lock Heavy Duty Suction Mount: Standard twist-lock version; magnetic and wireless charging heads are optional, not included.

    Exact selected non-charging variant and mounting arrangement. Maker-stated dimensions and mechanisms; no hands-on retention or vibration-protection result. Verify case, vehicle and surface fit.

    Quad Lock Heavy Duty Suction Mount actual maker facts · Actual selected maker page compatibility, specifications, installation and variant descriptions.
    Standard twist-lock version; magnetic and wireless charging heads are optional, not included.

    Checked September 30, 2026

  12. Quad Lock Heavy Duty Suction Mount: Lever suction base and dual-pivot arm; maker does not recommend it for motorcycles, scooters, ATVs or high-frequency engine vibration.

    Exact selected non-charging variant and mounting arrangement. Maker-stated dimensions and mechanisms; no hands-on retention or vibration-protection result. Verify case, vehicle and surface fit.

    Quad Lock Heavy Duty Suction Mount actual maker facts · Actual selected maker page compatibility, specifications, installation and variant descriptions.
    Lever suction base and dual-pivot arm; maker does not recommend it for motorcycles, scooters, ATVs or high-frequency engine vibration.

    Checked September 30, 2026

  13. OFFROAM EE20164: Maker specifies Toyota Land Cruiser250 model years2024–2027 with OEM dashboard, excluding third-party dashboard modifications; MagSafe-equipped phone or case required.

    Exact selected non-charging variant and mounting arrangement. Maker-stated dimensions and mechanisms; no hands-on retention or vibration-protection result. Verify case, vehicle and surface fit.

    OFFROAM EE20164 actual maker facts · Actual selected maker page compatibility, specifications, installation and variant descriptions.
    Maker specifies Toyota Land Cruiser250 model years2024–2027 with OEM dashboard, excluding third-party dashboard modifications; MagSafe-equipped phone or case required.

    Checked September 30, 2026

  14. OFFROAM EE20164: Select Non-Charging; Qi2 charging is a separate variant.

    Exact selected non-charging variant and mounting arrangement. Maker-stated dimensions and mechanisms; no hands-on retention or vibration-protection result. Verify case, vehicle and surface fit.

    OFFROAM EE20164 actual maker facts · Actual selected maker page compatibility, specifications, installation and variant descriptions.
    Select Non-Charging; Qi2 charging is a separate variant.

    Checked September 30, 2026

  15. OFFROAM EE20164: Package lists vehicle-specific base, installation hex key, regular articulating arm and non-charging magnetic holder.

    Exact selected non-charging variant and mounting arrangement. Maker-stated dimensions and mechanisms; no hands-on retention or vibration-protection result. Verify case, vehicle and surface fit.

    OFFROAM EE20164 actual maker facts · Actual selected maker page compatibility, specifications, installation and variant descriptions.
    Package lists vehicle-specific base, installation hex key, regular articulating arm and non-charging magnetic holder.

    Checked September 30, 2026

  16. iOttie Easy One Touch6 Dash & Windshield: Suction base for dashboard or windshield; adjustable bottom foot provides four additional height settings.

    Exact selected non-charging variant and mounting arrangement. Maker-stated dimensions and mechanisms; no hands-on retention or vibration-protection result. Verify case, vehicle and surface fit.

    iOttie Easy One Touch6 Dash & Windshield actual maker facts · Actual selected maker page compatibility, specifications, installation and variant descriptions.
    Suction base for dashboard or windshield; adjustable bottom foot provides four additional height settings.

    Checked September 30, 2026

  17. iOttie Easy One Touch6 Dash & Windshield: Non-wireless-charging mount with a cord organizer; charge the phone separately.

    Exact selected non-charging variant and mounting arrangement. Maker-stated dimensions and mechanisms; no hands-on retention or vibration-protection result. Verify case, vehicle and surface fit.

    iOttie Easy One Touch6 Dash & Windshield actual maker facts · Actual selected maker page compatibility, specifications, installation and variant descriptions.
    Non-wireless-charging mount with a cord organizer; charge the phone separately.

    Checked September 30, 2026

  18. iOttie Easy One Touch6 Dash & Windshield: Trigger closes self-centering cradle arms; telescopic arm adjusts position.

    Exact selected non-charging variant and mounting arrangement. Maker-stated dimensions and mechanisms; no hands-on retention or vibration-protection result. Verify case, vehicle and surface fit.

    iOttie Easy One Touch6 Dash & Windshield actual maker facts · Actual selected maker page compatibility, specifications, installation and variant descriptions.
    Trigger closes self-centering cradle arms; telescopic arm adjusts position.

    Checked September 30, 2026

  19. Peak Design Car Mount: Works with Peak Design case/adapter or MagSafe phones/cases; best attachment surfaces are flat, hard, non-porous and non-textured.

    Exact selected non-charging variant and mounting arrangement. Maker-stated dimensions and mechanisms; no hands-on retention or vibration-protection result. Verify case, vehicle and surface fit.

    Peak Design Car Mount actual maker facts · Actual selected maker page compatibility, specifications, installation and variant descriptions.
    Works with Peak Design case/adapter or MagSafe phones/cases; best attachment surfaces are flat, hard, non-porous and non-textured.

    Checked September 30, 2026

  20. Peak Design Car Mount: Select Non-Charging rather than Qi1/Qi2 charging variants.

    Exact selected non-charging variant and mounting arrangement. Maker-stated dimensions and mechanisms; no hands-on retention or vibration-protection result. Verify case, vehicle and surface fit.

    Peak Design Car Mount actual maker facts · Actual selected maker page compatibility, specifications, installation and variant descriptions.
    Select Non-Charging rather than Qi1/Qi2 charging variants.

    Checked September 30, 2026

  21. Peak Design Car Mount: 3M VHB adhesive attachment to dash/console, magnetic SlimLink connection and aluminum ballhead adjustment.

    Exact selected non-charging variant and mounting arrangement. Maker-stated dimensions and mechanisms; no hands-on retention or vibration-protection result. Verify case, vehicle and surface fit.

    Peak Design Car Mount actual maker facts · Actual selected maker page compatibility, specifications, installation and variant descriptions.
    3M VHB adhesive attachment to dash/console, magnetic SlimLink connection and aluminum ballhead adjustment.

    Checked September 30, 2026

  22. Peak Design Car Vent Mount: Compatible with many but not all car vents; Peak Design case/adapter or MagSafe phone/case required.

    Exact selected non-charging variant and mounting arrangement. Maker-stated dimensions and mechanisms; no hands-on retention or vibration-protection result. Verify case, vehicle and surface fit.

    Peak Design Car Vent Mount actual maker facts · Actual selected maker page compatibility, specifications, installation and variant descriptions.
    Compatible with many but not all car vents; Peak Design case/adapter or MagSafe phone/case required.

    Checked September 30, 2026

  23. Peak Design Car Vent Mount: Select Non-Charging; Qi2 is a separate powered variant.

    Exact selected non-charging variant and mounting arrangement. Maker-stated dimensions and mechanisms; no hands-on retention or vibration-protection result. Verify case, vehicle and surface fit.

    Peak Design Car Vent Mount actual maker facts · Actual selected maker page compatibility, specifications, installation and variant descriptions.
    Select Non-Charging; Qi2 is a separate powered variant.

    Checked September 30, 2026

  24. Peak Design Car Vent Mount: Vent attachment has two connection points;360-degree swivel arm, magnetic SlimLink attachment and adjustable ballhead.

    Exact selected non-charging variant and mounting arrangement. Maker-stated dimensions and mechanisms; no hands-on retention or vibration-protection result. Verify case, vehicle and surface fit.

    Peak Design Car Vent Mount actual maker facts · Actual selected maker page compatibility, specifications, installation and variant descriptions.
    Vent attachment has two connection points;360-degree swivel arm, magnetic SlimLink attachment and adjustable ballhead.

    Checked September 30, 2026

  25. iOttie Easy One Touch6 Vehicle Screen: Semi-permanent adhesive base installs behind a flat vehicle screen; bottom foot has four additional height settings.

    Exact selected non-charging variant and mounting arrangement. Maker-stated dimensions and mechanisms; no hands-on retention or vibration-protection result. Verify case, vehicle and surface fit.

    iOttie Easy One Touch6 Vehicle Screen actual maker facts · Actual selected maker page compatibility, specifications, installation and variant descriptions.
    Semi-permanent adhesive base installs behind a flat vehicle screen; bottom foot has four additional height settings.

    Checked September 30, 2026

  26. iOttie Easy One Touch6 Vehicle Screen: Non-wireless-charging mount keeps a separate charging cord in its organizer.

    Exact selected non-charging variant and mounting arrangement. Maker-stated dimensions and mechanisms; no hands-on retention or vibration-protection result. Verify case, vehicle and surface fit.

    iOttie Easy One Touch6 Vehicle Screen actual maker facts · Actual selected maker page compatibility, specifications, installation and variant descriptions.
    Non-wireless-charging mount keeps a separate charging cord in its organizer.

    Checked September 30, 2026

  27. iOttie Easy One Touch6 Vehicle Screen: Self-centering cradle arms, adjustable arm/cradle and a detachable adhesive base.

    Exact selected non-charging variant and mounting arrangement. Maker-stated dimensions and mechanisms; no hands-on retention or vibration-protection result. Verify case, vehicle and surface fit.

    iOttie Easy One Touch6 Vehicle Screen actual maker facts · Actual selected maker page compatibility, specifications, installation and variant descriptions.
    Self-centering cradle arms, adjustable arm/cradle and a detachable adhesive base.

    Checked September 30, 2026

  28. WeatherTech CupFone8ACF1: Standard model fits phones2.37–3.37 inches wide and up to0.56 inch deep; interchangeable base cups fit many vehicle cup holders.

    Exact selected non-charging variant and mounting arrangement. Maker-stated dimensions and mechanisms; no hands-on retention or vibration-protection result. Verify case, vehicle and surface fit.

    WeatherTech CupFone8ACF1 actual maker facts · Actual selected maker page compatibility, specifications, installation and variant descriptions.
    Standard model fits phones2.37–3.37 inches wide and up to0.56 inch deep; interchangeable base cups fit many vehicle cup holders.

    Checked September 30, 2026

  29. WeatherTech CupFone8ACF1: No built-in wireless charging selected; the holder leaves access for a phone charging cable.

    Exact selected non-charging variant and mounting arrangement. Maker-stated dimensions and mechanisms; no hands-on retention or vibration-protection result. Verify case, vehicle and surface fit.

    WeatherTech CupFone8ACF1 actual maker facts · Actual selected maker page compatibility, specifications, installation and variant descriptions.
    No built-in wireless charging selected; the holder leaves access for a phone charging cable.

    Checked September 30, 2026

  30. WeatherTech CupFone8ACF1: Adjustable portrait viewing; Two View is a different model for landscape operation.

    Exact selected non-charging variant and mounting arrangement. Maker-stated dimensions and mechanisms; no hands-on retention or vibration-protection result. Verify case, vehicle and surface fit.

    WeatherTech CupFone8ACF1 actual maker facts · Actual selected maker page compatibility, specifications, installation and variant descriptions.
    Adjustable portrait viewing; Two View is a different model for landscape operation.

    Checked September 30, 2026

Something changed? Help us correct the record.