Our top 10, at a glance.

Choose a physical soldering station for electronics repair by matching US power requirements, temperature-control workflow, handpiece and replacement-tip ecosystem.

  1. #1Hakko FX-888DXBest for a rotary temperature control and T18 replaceable tips
  2. #2Hakko FX-971Best for t39 tips, five presets and a sleep timer
  3. #3Weller WE1010NABest for eT tips with standby and password-protected settings
  4. #4PACE ADS200 PLUSBest for an adjustable Blue Series cartridge system with stand-triggered setback
  5. #5JBC CDB Soldering StationBest for c245 cartridges with an integrated cleaner and exchanger
  6. #6Weller WT1012 KitBest for lT tips with tool identification and offset controls
  7. #7Metcal PS-900 Soldering SystemBest for an induction system with a separately replaceable coil
  8. #8Metcal MX-5210Best for a two-port induction platform for adding a second handpiece
  9. #9X-Tronic 3020-XTSBest for a digital readout and fixed ten-minute sleep timer
  10. #10Aoyue Int 9378 ProBest for a tool-recognition station with programmable sleep and favourites

All 10 picks, in order.

  1. #1

    Best for a rotary temperature control and T18 replaceable tips

    Hakko FX-888DX

    A rotary temperature control and T18 replaceable tips.

    Why it fits

    • Hakko’s FX-888DX specification table lists 50–480°C, while its feature cards give 50–450°C; the upper limit needs confirmation. The maker lists closed-loop control. Its feature page describes a rotary knob used to change temperature. The US kit includes an FX-8801 handpiece rated 65 W, a T18-D16 tip, holder, sponge and cleaning wire. The selected FX888DX-010BY station is listed at 100 W consumption and 120 V AC. FX-8801 uses T18 tips; the maker lists replacement handpieces, holder parts and power cords. [1] [2] [3]

    Before you choose

    • The 100 W station rating is not a 100 W rating for the supplied iron. Confirm tip shape for your joints. [1] [2] [3]

    Check before buying:

    • Automatic standby and loaded temperature accuracy are not established here.

    Model: FX888DX-010BY, US 120 V · FX888DX-010BY, US 120 V · US

    Check current details at Hakko ↗

  2. #2

    Best for t39 tips, five presets and a sleep timer

    Hakko FX-971

    T39 tips, five presets and a sleep timer.

    Why it fits

    • Hakko lists 50–450°C settings, five presets, a sleep timer, auto shutoff and password lockout. The US station specification is 100 W consumption. FX971-010 includes an FX-9701 standard handpiece, FH-215 holder and USB cable; the package note says tips are not included. The maker specifies 120 V input and 24 V output. The standard FX-9701 uses T39 tips; the page lists tips, replacement handpieces and holder components. [4] [5] [6]

    Before you choose

    • Budget for a model-compatible T39 tip separately; the displayed temperature does not establish temperature at a solder joint. [4] [5] [6]

    Check before buying:

    • Heat-up, loaded recovery, calibration accuracy and comfort are untested.

    Model: FX971-010, US 120 V · FX971-010, US 120 V · US

    Check current details at Hakko ↗

  3. #3

    Best for eT tips with standby and password-protected settings

    Weller WE1010NA

    ET tips with standby and password-protected settings.

    Why it fits

    • Weller lists a 100–450°C range, standby, automatic setback and password protection. Its table lists station power as 85 W. The kit has a 70 W WEP70 iron, PH70 rest and cleaning sponge; Weller describes tool-free tip changes. WE1010NA is the 120 V model using ET tips. The maker names specific replacement tip variants for WEP70 and separately catalogs the handpiece and rest. [7] [8] [9]

    Before you choose

    • Weller does not recommend this model for micro-components or ground planes. Check the exact WEP70-compatible ET variant; generic family naming is not sufficient. [7] [8] [9]

    Check before buying:

    • Loaded recovery and accuracy are untested; the cause of the retained owner’s fit complaint is unresolved.

    Model: WE1010NA, 120 V · WE1010NA, 120 V · US

    Check current details at Weller ↗

  4. #4

    Best for an adjustable Blue Series cartridge system with stand-triggered setback

    PACE ADS200 PLUS

    An adjustable Blue Series cartridge system with stand-triggered setback.

    Why it fits

    • PACE lists a 193–454°C range adjusted with arrow keys and up to 120 W from its Blue Series tip-heater system. The 8007-0593 bundle includes a TD-200 handpiece, three cartridges and an Instant SetBack Cubby that lowers temperature when the iron is placed in it. This is the 120 V bundle. TD-200 uses AccuDrive Blue Series cartridges; the page lists Standard and Ultra-Performance tip families and replacement station/stand components. [10] [11] [12]

    Before you choose

    • Choose the PLUS model and exact bundle. The up-to rating does not establish continuous output or performance on your board. [10] [11] [12]

    Check before buying:

    • Heat-up, continuous power delivery, setback temperature and loaded recovery are unverified.

    Model: 8007-0593, 120 V three-tip/ISB bundle · 8007-0593, 120 V three-tip/ISB bundle · US

    Check current details at PACE ↗

  5. #5

    Best for c245 cartridges with an integrated cleaner and exchanger

    JBC CDB Soldering Station

    C245 cartridges with an integrated cleaner and exchanger.

    Why it fits

    • JBC lists a 90–450°C range, sleep and hibernation modes, nominal 175 W power and 130 W peak tool power. CDB includes a T245-A general-purpose handle and integrates tip cleaning and a cartridge exchanger; a cartridge is not included. CD-1BQF is the 120 V variant. T245 uses C245 cartridges; the maker catalogs replacement handles, holder and cleaner components. [13] [14] [15]

    Before you choose

    • A peak tool rating is not continuous measured output. Add the appropriate cartridge to the station purchase. [13] [14] [15]

    Check before buying:

    • Loaded thermal recovery, temperature accuracy and component-specific results are untested.

    Model: CD-1BQF, 120 V · CD-1BQF, 120 V · US

    Check current details at JBC ↗

  6. #6

    Best for lT tips with tool identification and offset controls

    Weller WT1012 Kit

    LT tips with tool identification and offset controls.

    Why it fits

    • Weller lists lock, offset and OFF-time functions and automatic tool identification for the single-channel WT1012N. Its station power rating is 95 W. The kit includes an 80 W, 24 V WSP80 iron and WSR201 rest with brass wool and a sponge. The selected kit uses 120 V input. WSP80 uses LT tips; the maker catalogs the iron and rest separately. The stated 50–450°C range is explicitly tool-dependent. [16] [17] [18]

    Before you choose

    • Do not treat the broad station range as a confirmed WSP80 range. This kit’s LT tips are a different named family from WE1010NA’s ET tips. [16] [17] [18]

    Check before buying:

    • Exact WSP80 operating range, standby timing and loaded recovery need confirmation.

    Model: WT1012N, 120 V · WT1012N, 120 V · US

    Check current details at Weller ↗

  7. #7

    Best for an induction system with a separately replaceable coil

    Metcal PS-900 Soldering System

    An induction system with a separately replaceable coil.

    Why it fits

    • Metcal’s manual describes SmartHeat temperature selection through the heater tip’s metallurgical properties, rather than an adjustable setpoint dial. It lists 60 W maximum output at 22°C ambient and 90 W maximum consumption. The manual lists a PS-HC3 handpiece/coil assembly, WS2-NS workstand and a removal pad. The PS-CA3 coil is separately replaceable. The manual specifies 100–240 V AC, 50/60 Hz. Metcal lists SxV soldering and CxV blade tips for PS-CA3 and a separate optional auto-sleep stand. [19] [20] [21]

    Before you choose

    • Temperature selection requires the appropriate heater-tip series. Do not assume the basic workstand has the optional stand’s auto-sleep feature. [19] [20] [21]

    Check before buying:

    • Current included tip, regional cord and loaded recovery need confirmation.

    Model: PS-900 complete system, US cord · PS-900 complete system, US cord · US

    Check current details at Metcal ↗

  8. #8

    Best for a two-port induction platform for adding a second handpiece

    Metcal MX-5210

    A two-port induction platform for adding a second handpiece.

    Why it fits

    • Metcal’s catalog describes MX-PS5200 with 80 W maximum output shared dynamically in dual mode, a power display and a programmable PowerSave mode. MX-5210 includes one advanced handpiece and one workstand; the catalog identifies MX-H1-AV and MX-W1AV, whose stand provides auto-sleep. The catalog specifies 100–240 V AC, 50/60 Hz and 125 W rated consumption. The advanced handpiece uses STTC and SMTC cartridges; replacement grips and handpieces are cataloged. [22] [23] [24]

    Before you choose

    • Two ports do not mean two supplied irons or 80 W for each simultaneously. SmartHeat uses cartridge-defined temperatures; this is not a dial-adjustable station. [22] [23] [24]

    Check before buying:

    • Current cartridge inclusion, regional cord and loaded power allocation are unverified.

    Model: MX-5210 complete system, US cord · MX-5210 complete system, US cord · US

    Check current details at Metcal ↗

  9. #9

    Best for a digital readout and fixed ten-minute sleep timer

    X-Tronic 3020-XTS

    A digital readout and fixed ten-minute sleep timer.

    Why it fits

    • X-Tronic lists 200–480°C settings, a Celsius/Fahrenheit switch, digital readout and a ten-minute sleep timer. The page calls it 75 W but also describes 60 W for iron heating and 15 W for electronics. The kit lists an iron, control base, side-mounted solder-roll holder, iron rest, brass cleaner and wet sponge. The maker specifies 110/120 V AC, 60 Hz with no 220 V version on this listing. Its model-series parts page catalogs 900M tips and a 3021 replacement heating element for 3020. [25] [26] [27]

    Before you choose

    • The conflicting wattage descriptions leave delivered iron power unresolved. Confirm tip assembly and current package contents with the maker. [25] [26] [27]

    Check before buying:

    • Measured recovery, accuracy and exact sleep temperature are unverified.

    Model: XTR-3020-XTS, 110/120 V 60 Hz · XTR-3020-XTS, 110/120 V 60 Hz · US

    Check current details at X-Tronic ↗

  10. #10

    Best for a tool-recognition station with programmable sleep and favourites

    Aoyue Int 9378 Pro

    A tool-recognition station with programmable sleep and favourites.

    Why it fits

    • Aoyue lists digital controls, offset, programmable sleep, wake-up, system lockout and favourite settings, with a 200–480°C range. The maker lists a 60 W ceramic-heater iron with 24 V output and a 2660 stand in the basic package. Choose the page’s 110–130 V input selection rather than its 210–240 V variant. The maker describes multi-tool connectivity and automatic tool recognition; additional tools are separate. [28] [29] [30]

    Before you choose

    • The retained page does not identify a replacement tip family or exact extra-tool compatibility. Resolve those before investing in this platform. [28] [29] [30]

    Check before buying:

    • Current US replacement-tip, heater and handpiece supply is unverified; standby timing and loaded performance are untested.

    Model: 141013248-1, 110–130 V selection · 141013248-1, 110–130 V selection · US

    Check current details at Aoyue ↗

The details, side by side.

Published specifications and features
What matters#1Hakko FX-888DX#2Hakko FX-971#3Weller WE1010NA#4PACE ADS200 PLUS#5JBC CDB Soldering Station#6Weller WT1012 Kit#7Metcal PS-900 Soldering System#8Metcal MX-5210#9X-Tronic 3020-XTS#10Aoyue Int 9378 Pro
WorkflowHakko’s FX-888DX specification table lists 50–480°C, while its feature cards give 50–450°C; the upper limit needs confirmation. The maker lists closed-loop control. Its feature page describes a rotary knob used to change temperature. [1]Hakko lists 50–450°C settings, five presets, a sleep timer, auto shutoff and password lockout. The US station specification is 100 W consumption. [4]Weller lists a 100–450°C range, standby, automatic setback and password protection. Its table lists station power as 85 W. [7]PACE lists a 193–454°C range adjusted with arrow keys and up to 120 W from its Blue Series tip-heater system. [10]JBC lists a 90–450°C range, sleep and hibernation modes, nominal 175 W power and 130 W peak tool power. [13]Weller lists lock, offset and OFF-time functions and automatic tool identification for the single-channel WT1012N. Its station power rating is 95 W. [16]Metcal’s manual describes SmartHeat temperature selection through the heater tip’s metallurgical properties, rather than an adjustable setpoint dial. It lists 60 W maximum output at 22°C ambient and 90 W maximum consumption. [19]Metcal’s catalog describes MX-PS5200 with 80 W maximum output shared dynamically in dual mode, a power display and a programmable PowerSave mode. [22]X-Tronic lists 200–480°C settings, a Celsius/Fahrenheit switch, digital readout and a ten-minute sleep timer. The page calls it 75 W but also describes 60 W for iron heating and 15 W for electronics. [25]Aoyue lists digital controls, offset, programmable sleep, wake-up, system lockout and favourite settings, with a 200–480°C range. [28]
Form factorThe US kit includes an FX-8801 handpiece rated 65 W, a T18-D16 tip, holder, sponge and cleaning wire. [2]FX971-010 includes an FX-9701 standard handpiece, FH-215 holder and USB cable; the package note says tips are not included. [5]The kit has a 70 W WEP70 iron, PH70 rest and cleaning sponge; Weller describes tool-free tip changes. [8]The 8007-0593 bundle includes a TD-200 handpiece, three cartridges and an Instant SetBack Cubby that lowers temperature when the iron is placed in it. [11]CDB includes a T245-A general-purpose handle and integrates tip cleaning and a cartridge exchanger; a cartridge is not included. [14]The kit includes an 80 W, 24 V WSP80 iron and WSR201 rest with brass wool and a sponge. [17]The manual lists a PS-HC3 handpiece/coil assembly, WS2-NS workstand and a removal pad. The PS-CA3 coil is separately replaceable. [20]MX-5210 includes one advanced handpiece and one workstand; the catalog identifies MX-H1-AV and MX-W1AV, whose stand provides auto-sleep. [23]The kit lists an iron, control base, side-mounted solder-roll holder, iron rest, brass cleaner and wet sponge. [26]The maker lists a 60 W ceramic-heater iron with 24 V output and a 2660 stand in the basic package. [29]
CompatibilityThe selected FX888DX-010BY station is listed at 100 W consumption and 120 V AC. FX-8801 uses T18 tips; the maker lists replacement handpieces, holder parts and power cords. [3]The maker specifies 120 V input and 24 V output. The standard FX-9701 uses T39 tips; the page lists tips, replacement handpieces and holder components. [6]WE1010NA is the 120 V model using ET tips. The maker names specific replacement tip variants for WEP70 and separately catalogs the handpiece and rest. [9]This is the 120 V bundle. TD-200 uses AccuDrive Blue Series cartridges; the page lists Standard and Ultra-Performance tip families and replacement station/stand components. [12]CD-1BQF is the 120 V variant. T245 uses C245 cartridges; the maker catalogs replacement handles, holder and cleaner components. [15]The selected kit uses 120 V input. WSP80 uses LT tips; the maker catalogs the iron and rest separately. The stated 50–450°C range is explicitly tool-dependent. [18]The manual specifies 100–240 V AC, 50/60 Hz. Metcal lists SxV soldering and CxV blade tips for PS-CA3 and a separate optional auto-sleep stand. [21]The catalog specifies 100–240 V AC, 50/60 Hz and 125 W rated consumption. The advanced handpiece uses STTC and SMTC cartridges; replacement grips and handpieces are cataloged. [24]The maker specifies 110/120 V AC, 60 Hz with no 220 V version on this listing. Its model-series parts page catalogs 900M tips and a 3021 replacement heating element for 3020. [27]Choose the page’s 110–130 V input selection rather than its 210–240 V variant. The maker describes multi-tool connectivity and automatic tool recognition; additional tools are separate. [30]

Match the handpiece and tip family

FX-888DX’s standard iron uses T18 tips; FX-971’s uses T39. WEP70 uses ET variants, while WSP80 uses LT tips. Confirm the exact handpiece and replacement part number before ordering. JBC and FX-971 packages explicitly exclude a cartridge or tip. [3] [6] [9] [18] [14] [5]

Separate adjustable settings from cartridge temperatures

Hakko and PACE provide selectable station temperatures. Metcal PS-900 chooses temperature through the heater tip, while its optional auto-sleep stand is separate from the basic stand. A setpoint or nominal cartridge temperature does not establish the temperature of your solder joint. [1] [10] [19] [21]

Compare qualified power ratings and actual packages

Weller lists WE1010NA’s station at 85 W and its iron at 70 W. JBC distinguishes nominal station power from peak tool power. MX-5210 supplies one handpiece even though the platform has two ports. Compare the exact package and rating type, then check the selected voltage and supplied instructions. [7] [8] [13] [23] [22]

How we compared.

Source-based comparison of maker pages and manuals read October 2, 2026; no hands-on heat-up, recovery, temperature-accuracy, comfort or electrical-safety tests. Adjustable stations with named tip families and documented parts rank first, followed by fixed-temperature induction systems and options needing additional compatibility checks. Ten distinct stations are included; colour and accessory-only variants are not separate picks. Reddit poster alzee76 described WE1010NA tip wobble and oxidation in one owner post; authenticity and cause were unresolved. That anecdote informs our exact-tip-fit check, not a claim about all units. Wattage is qualified as source input, iron or output rating where available; a displayed setpoint is not a measured joint temperature.

How we choose

Sources

Official product documentation, reviewed October 2, 2026.

Hakko FX-888DX model and specifications ↗

Hakko · US · Read October 2, 2026

Hakko FX-971 model and specifications ↗

Hakko · US · Read October 2, 2026

Weller WE1010NA model and specifications ↗

Weller · US · Read October 2, 2026

PACE ADS200 PLUS model and specifications ↗

PACE · US · Read October 2, 2026

Weller WT1012 Kit model and specifications ↗

Weller · US · Read October 2, 2026

Metcal MX-5210 model and specifications ↗

Metcal · US · Read October 2, 2026

X-Tronic 3020-XTS model and specifications ↗

X-Tronic · US · Read October 2, 2026

Aoyue Int 9378 Pro model and specifications ↗

Aoyue · US · Read October 2, 2026

FX-888DX rotary control ↗

Hakko · US · Read October 2, 2026

WE1010NA maker application limitations ↗

Weller · US · Read October 2, 2026

PS-900 user manual ↗

Metcal · US · Read October 2, 2026

Metcal catalog 2022 exact MX-5210 and PS-900 rows ↗

Metcal · US · Read October 2, 2026

3020-XTS maker replacement parts ↗

X-Tronic · US · Read October 2, 2026

alzee76 WE1010NA tip-fit owner post ↗

Reddit · US · Read October 2, 2026

Detailed source notes
  1. Hakko FX-888DX: Hakko’s FX-888DX specification table lists 50–480°C, while its feature cards give 50–450°C; the upper limit needs confirmation. The maker lists closed-loop control. Its feature page describes a rotary knob used to change temperature.

    Exact selected model/region. Maker settings, power ratings and package details, not measured joint temperature, sustained output, heat-up, recovery, comfort or electrical-safety results. Check current tip/handpiece and power instructions.

    Hakko FX-888DX model and specifications · Named model feature, specifications, package and parts sections
    US FX888DX-010BY:100W120VAC;specification table50-480C but feature cards50-450C, conflicting upper limit;closedloopsensor;FX8801-02 65W26VAC,T18,T18-D16included;FH800-03BY holder,spongeA1559,wireA1561;replacementhandpiece and cordB3741 listed.

    FX-888DX rotary control · Named model specifications, control, package, compatibility or replacement-parts section
    FX888DXrotaryencoder:turnknobfor temperature;pushselect;adjustmode accepts measuredtiptemp;standardFX8801handpiece.

    Checked October 2, 2026

  2. Hakko FX-888DX: The US kit includes an FX-8801 handpiece rated 65 W, a T18-D16 tip, holder, sponge and cleaning wire.

    Exact selected model/region. Maker settings, power ratings and package details, not measured joint temperature, sustained output, heat-up, recovery, comfort or electrical-safety results. Check current tip/handpiece and power instructions.

    Hakko FX-888DX model and specifications · Named model feature, specifications, package and parts sections
    US FX888DX-010BY:100W120VAC;specification table50-480C but feature cards50-450C, conflicting upper limit;closedloopsensor;FX8801-02 65W26VAC,T18,T18-D16included;FH800-03BY holder,spongeA1559,wireA1561;replacementhandpiece and cordB3741 listed.

    FX-888DX rotary control · Named model specifications, control, package, compatibility or replacement-parts section
    FX888DXrotaryencoder:turnknobfor temperature;pushselect;adjustmode accepts measuredtiptemp;standardFX8801handpiece.

    Checked October 2, 2026

  3. Hakko FX-888DX: The selected FX888DX-010BY station is listed at 100 W consumption and 120 V AC. FX-8801 uses T18 tips; the maker lists replacement handpieces, holder parts and power cords.

    Exact selected model/region. Maker settings, power ratings and package details, not measured joint temperature, sustained output, heat-up, recovery, comfort or electrical-safety results. Check current tip/handpiece and power instructions.

    Hakko FX-888DX model and specifications · Named model feature, specifications, package and parts sections
    US FX888DX-010BY:100W120VAC;specification table50-480C but feature cards50-450C, conflicting upper limit;closedloopsensor;FX8801-02 65W26VAC,T18,T18-D16included;FH800-03BY holder,spongeA1559,wireA1561;replacementhandpiece and cordB3741 listed.

    FX-888DX rotary control · Named model specifications, control, package, compatibility or replacement-parts section
    FX888DXrotaryencoder:turnknobfor temperature;pushselect;adjustmode accepts measuredtiptemp;standardFX8801handpiece.

    Checked October 2, 2026

  4. Hakko FX-971: Hakko lists 50–450°C settings, five presets, a sleep timer, auto shutoff and password lockout. The US station specification is 100 W consumption.

    Exact selected model/region. Maker settings, power ratings and package details, not measured joint temperature, sustained output, heat-up, recovery, comfort or electrical-safety results. Check current tip/handpiece and power instructions.

    Hakko FX-971 model and specifications · Named model feature, specifications, package and parts sections
    FX971-010;100W120V;24Vout;50-450C;5presets,sleep,autooff,password;FX9701standardhandpieceT39;FH215holderUSBcable;tipsnotincluded;T39tip and replacementhandpiece listings.

    Checked October 2, 2026

  5. Hakko FX-971: FX971-010 includes an FX-9701 standard handpiece, FH-215 holder and USB cable; the package note says tips are not included.

    Exact selected model/region. Maker settings, power ratings and package details, not measured joint temperature, sustained output, heat-up, recovery, comfort or electrical-safety results. Check current tip/handpiece and power instructions.

    Hakko FX-971 model and specifications · Named model feature, specifications, package and parts sections
    FX971-010;100W120V;24Vout;50-450C;5presets,sleep,autooff,password;FX9701standardhandpieceT39;FH215holderUSBcable;tipsnotincluded;T39tip and replacementhandpiece listings.

    Checked October 2, 2026

  6. Hakko FX-971: The maker specifies 120 V input and 24 V output. The standard FX-9701 uses T39 tips; the page lists tips, replacement handpieces and holder components.

    Exact selected model/region. Maker settings, power ratings and package details, not measured joint temperature, sustained output, heat-up, recovery, comfort or electrical-safety results. Check current tip/handpiece and power instructions.

    Hakko FX-971 model and specifications · Named model feature, specifications, package and parts sections
    FX971-010;100W120V;24Vout;50-450C;5presets,sleep,autooff,password;FX9701standardhandpieceT39;FH215holderUSBcable;tipsnotincluded;T39tip and replacementhandpiece listings.

    Checked October 2, 2026

  7. Weller WE1010NA: Weller lists a 100–450°C range, standby, automatic setback and password protection. Its table lists station power as 85 W.

    Exact selected model/region. Maker settings, power ratings and package details, not measured joint temperature, sustained output, heat-up, recovery, comfort or electrical-safety results. Check current tip/handpiece and power instructions.

    Weller WE1010NA model and specifications · Named model feature, specifications, package and parts sections
    WE1010NA120V;100-450C;85Wtable;70WWEP70;PH70rest,sponge;ETtips;standbyautosetbackpassword;replacement variants4ETHL4ETKL4EKOL4ETSL forWEP70;handpiece/rest links.

    WE1010NA maker application limitations · Named model specifications, control, package, compatibility or replacement-parts section
    Maker doesnotrecommend microcomponents,groundplanes,heatsinks,metalart,jewelry,automotive/marine.ETA1.6mm included;3pushbuttonsLCD.Explicitreplacementtipvariant listforWEP70 conflicts with looseolderETfamily examples:followexactcurrentvariant.

    Checked October 2, 2026

  8. Weller WE1010NA: The kit has a 70 W WEP70 iron, PH70 rest and cleaning sponge; Weller describes tool-free tip changes.

    Exact selected model/region. Maker settings, power ratings and package details, not measured joint temperature, sustained output, heat-up, recovery, comfort or electrical-safety results. Check current tip/handpiece and power instructions.

    Weller WE1010NA model and specifications · Named model feature, specifications, package and parts sections
    WE1010NA120V;100-450C;85Wtable;70WWEP70;PH70rest,sponge;ETtips;standbyautosetbackpassword;replacement variants4ETHL4ETKL4EKOL4ETSL forWEP70;handpiece/rest links.

    WE1010NA maker application limitations · Named model specifications, control, package, compatibility or replacement-parts section
    Maker doesnotrecommend microcomponents,groundplanes,heatsinks,metalart,jewelry,automotive/marine.ETA1.6mm included;3pushbuttonsLCD.Explicitreplacementtipvariant listforWEP70 conflicts with looseolderETfamily examples:followexactcurrentvariant.

    Checked October 2, 2026

  9. Weller WE1010NA: WE1010NA is the 120 V model using ET tips. The maker names specific replacement tip variants for WEP70 and separately catalogs the handpiece and rest.

    Exact selected model/region. Maker settings, power ratings and package details, not measured joint temperature, sustained output, heat-up, recovery, comfort or electrical-safety results. Check current tip/handpiece and power instructions.

    Weller WE1010NA model and specifications · Named model feature, specifications, package and parts sections
    WE1010NA120V;100-450C;85Wtable;70WWEP70;PH70rest,sponge;ETtips;standbyautosetbackpassword;replacement variants4ETHL4ETKL4EKOL4ETSL forWEP70;handpiece/rest links.

    WE1010NA maker application limitations · Named model specifications, control, package, compatibility or replacement-parts section
    Maker doesnotrecommend microcomponents,groundplanes,heatsinks,metalart,jewelry,automotive/marine.ETA1.6mm included;3pushbuttonsLCD.Explicitreplacementtipvariant listforWEP70 conflicts with looseolderETfamily examples:followexactcurrentvariant.

    Checked October 2, 2026

  10. PACE ADS200 PLUS: PACE lists a 193–454°C range adjusted with arrow keys and up to 120 W from its Blue Series tip-heater system.

    Exact selected model/region. Maker settings, power ratings and package details, not measured joint temperature, sustained output, heat-up, recovery, comfort or electrical-safety results. Check current tip/handpiece and power instructions.

    PACE ADS200 PLUS model and specifications · Named model feature, specifications, package and parts sections
    8007-0593title120Vonly;PLUSupdated2024;193-454C,arrowkeys;up120Wmakerclaim;TD200BlueSeries;ISBautomaticlowertempwhenparked;3tips11300012P1,11300019P1,11300001P1;Standard/UltraPerformance compatibilitylinks.

    Checked October 2, 2026

  11. PACE ADS200 PLUS: The 8007-0593 bundle includes a TD-200 handpiece, three cartridges and an Instant SetBack Cubby that lowers temperature when the iron is placed in it.

    Exact selected model/region. Maker settings, power ratings and package details, not measured joint temperature, sustained output, heat-up, recovery, comfort or electrical-safety results. Check current tip/handpiece and power instructions.

    PACE ADS200 PLUS model and specifications · Named model feature, specifications, package and parts sections
    8007-0593title120Vonly;PLUSupdated2024;193-454C,arrowkeys;up120Wmakerclaim;TD200BlueSeries;ISBautomaticlowertempwhenparked;3tips11300012P1,11300019P1,11300001P1;Standard/UltraPerformance compatibilitylinks.

    Checked October 2, 2026

  12. PACE ADS200 PLUS: This is the 120 V bundle. TD-200 uses AccuDrive Blue Series cartridges; the page lists Standard and Ultra-Performance tip families and replacement station/stand components.

    Exact selected model/region. Maker settings, power ratings and package details, not measured joint temperature, sustained output, heat-up, recovery, comfort or electrical-safety results. Check current tip/handpiece and power instructions.

    PACE ADS200 PLUS model and specifications · Named model feature, specifications, package and parts sections
    8007-0593title120Vonly;PLUSupdated2024;193-454C,arrowkeys;up120Wmakerclaim;TD200BlueSeries;ISBautomaticlowertempwhenparked;3tips11300012P1,11300019P1,11300001P1;Standard/UltraPerformance compatibilitylinks.

    Checked October 2, 2026

  13. JBC CDB Soldering Station: JBC lists a 90–450°C range, sleep and hibernation modes, nominal 175 W power and 130 W peak tool power.

    Exact selected model/region. Maker settings, power ratings and package details, not measured joint temperature, sustained output, heat-up, recovery, comfort or electrical-safety results. Check current tip/handpiece and power instructions.

    JBC CDB Soldering Station model and specifications · Named model feature, specifications, package and parts sections
    CD1BQF120V;90-450C;175Wnominal,130Wpeaktool;Sleep/Hibernation;T245A C245;cartridgenotincluded;integratedcleaning/exchanger;replacementhandleH2994holderCL7984wiper links.

    Checked October 2, 2026

  14. JBC CDB Soldering Station: CDB includes a T245-A general-purpose handle and integrates tip cleaning and a cartridge exchanger; a cartridge is not included.

    Exact selected model/region. Maker settings, power ratings and package details, not measured joint temperature, sustained output, heat-up, recovery, comfort or electrical-safety results. Check current tip/handpiece and power instructions.

    JBC CDB Soldering Station model and specifications · Named model feature, specifications, package and parts sections
    CD1BQF120V;90-450C;175Wnominal,130Wpeaktool;Sleep/Hibernation;T245A C245;cartridgenotincluded;integratedcleaning/exchanger;replacementhandleH2994holderCL7984wiper links.

    Checked October 2, 2026

  15. JBC CDB Soldering Station: CD-1BQF is the 120 V variant. T245 uses C245 cartridges; the maker catalogs replacement handles, holder and cleaner components.

    Exact selected model/region. Maker settings, power ratings and package details, not measured joint temperature, sustained output, heat-up, recovery, comfort or electrical-safety results. Check current tip/handpiece and power instructions.

    JBC CDB Soldering Station model and specifications · Named model feature, specifications, package and parts sections
    CD1BQF120V;90-450C;175Wnominal,130Wpeaktool;Sleep/Hibernation;T245A C245;cartridgenotincluded;integratedcleaning/exchanger;replacementhandleH2994holderCL7984wiper links.

    Checked October 2, 2026

  16. Weller WT1012 Kit: Weller lists lock, offset and OFF-time functions and automatic tool identification for the single-channel WT1012N. Its station power rating is 95 W.

    Exact selected model/region. Maker settings, power ratings and package details, not measured joint temperature, sustained output, heat-up, recovery, comfort or electrical-safety results. Check current tip/handpiece and power instructions.

    Weller WT1012 Kit model and specifications · Named model feature, specifications, package and parts sections
    WT1012N120V;1channel95W;WSP80iron80W24VLTtips;WSR201brasswool/sponge;lockOFFtimeoffset;automatictoolidentification;50-450Ctool-dependent;standandironlinks.

    Checked October 2, 2026

  17. Weller WT1012 Kit: The kit includes an 80 W, 24 V WSP80 iron and WSR201 rest with brass wool and a sponge.

    Exact selected model/region. Maker settings, power ratings and package details, not measured joint temperature, sustained output, heat-up, recovery, comfort or electrical-safety results. Check current tip/handpiece and power instructions.

    Weller WT1012 Kit model and specifications · Named model feature, specifications, package and parts sections
    WT1012N120V;1channel95W;WSP80iron80W24VLTtips;WSR201brasswool/sponge;lockOFFtimeoffset;automatictoolidentification;50-450Ctool-dependent;standandironlinks.

    Checked October 2, 2026

  18. Weller WT1012 Kit: The selected kit uses 120 V input. WSP80 uses LT tips; the maker catalogs the iron and rest separately. The stated 50–450°C range is explicitly tool-dependent.

    Exact selected model/region. Maker settings, power ratings and package details, not measured joint temperature, sustained output, heat-up, recovery, comfort or electrical-safety results. Check current tip/handpiece and power instructions.

    Weller WT1012 Kit model and specifications · Named model feature, specifications, package and parts sections
    WT1012N120V;1channel95W;WSP80iron80W24VLTtips;WSR201brasswool/sponge;lockOFFtimeoffset;automatictoolidentification;50-450Ctool-dependent;standandironlinks.

    Checked October 2, 2026

  19. Metcal PS-900 Soldering System: Metcal’s manual describes SmartHeat temperature selection through the heater tip’s metallurgical properties, rather than an adjustable setpoint dial. It lists 60 W maximum output at 22°C ambient and 90 W maximum consumption.

    Exact selected model/region. Maker settings, power ratings and package details, not measured joint temperature, sustained output, heat-up, recovery, comfort or electrical-safety results. Check current tip/handpiece and power instructions.

    Metcal PS-900 Soldering System model and specifications · Named model feature, specifications, package and parts sections
    CurrentUSmakerPS900identity and accessorySFVSCVSTVtips listing.

    PS-900 user manual · Named model specifications, control, package, compatibility or replacement-parts section
    PS900manualpages1-5:PSHC3handpiececoil,WS2NSstand,PSCA3replacementcoil,PSH3handle;WS2Gautosleepstandoptional.100-240VAC50/60Hz90Wmaxconsumption60Wmaxoutputat22C;heatermetallurgyselectstemperature;powerofftipchanges.

    Metcal catalog 2022 exact MX-5210 and PS-900 rows · Named model specifications, control, package, compatibility or replacement-parts section
    PDF13-15:MX5210=MXPS5200+MXH1AV+MXW1AV;80Wmaxshareddualports,125Winput100-240VAC50/60Hz;PowerSave10-120min;TipSaverautosleep;SmartHeatfixedcartridgetemps;advancedhandleSTTC/SMTC.PDF34:PS900PSCA3coilSxVsolderCxVbladeonly.

    Checked October 2, 2026

  20. Metcal PS-900 Soldering System: The manual lists a PS-HC3 handpiece/coil assembly, WS2-NS workstand and a removal pad. The PS-CA3 coil is separately replaceable.

    Exact selected model/region. Maker settings, power ratings and package details, not measured joint temperature, sustained output, heat-up, recovery, comfort or electrical-safety results. Check current tip/handpiece and power instructions.

    Metcal PS-900 Soldering System model and specifications · Named model feature, specifications, package and parts sections
    CurrentUSmakerPS900identity and accessorySFVSCVSTVtips listing.

    PS-900 user manual · Named model specifications, control, package, compatibility or replacement-parts section
    PS900manualpages1-5:PSHC3handpiececoil,WS2NSstand,PSCA3replacementcoil,PSH3handle;WS2Gautosleepstandoptional.100-240VAC50/60Hz90Wmaxconsumption60Wmaxoutputat22C;heatermetallurgyselectstemperature;powerofftipchanges.

    Metcal catalog 2022 exact MX-5210 and PS-900 rows · Named model specifications, control, package, compatibility or replacement-parts section
    PDF13-15:MX5210=MXPS5200+MXH1AV+MXW1AV;80Wmaxshareddualports,125Winput100-240VAC50/60Hz;PowerSave10-120min;TipSaverautosleep;SmartHeatfixedcartridgetemps;advancedhandleSTTC/SMTC.PDF34:PS900PSCA3coilSxVsolderCxVbladeonly.

    Checked October 2, 2026

  21. Metcal PS-900 Soldering System: The manual specifies 100–240 V AC, 50/60 Hz. Metcal lists SxV soldering and CxV blade tips for PS-CA3 and a separate optional auto-sleep stand.

    Exact selected model/region. Maker settings, power ratings and package details, not measured joint temperature, sustained output, heat-up, recovery, comfort or electrical-safety results. Check current tip/handpiece and power instructions.

    Metcal PS-900 Soldering System model and specifications · Named model feature, specifications, package and parts sections
    CurrentUSmakerPS900identity and accessorySFVSCVSTVtips listing.

    PS-900 user manual · Named model specifications, control, package, compatibility or replacement-parts section
    PS900manualpages1-5:PSHC3handpiececoil,WS2NSstand,PSCA3replacementcoil,PSH3handle;WS2Gautosleepstandoptional.100-240VAC50/60Hz90Wmaxconsumption60Wmaxoutputat22C;heatermetallurgyselectstemperature;powerofftipchanges.

    Metcal catalog 2022 exact MX-5210 and PS-900 rows · Named model specifications, control, package, compatibility or replacement-parts section
    PDF13-15:MX5210=MXPS5200+MXH1AV+MXW1AV;80Wmaxshareddualports,125Winput100-240VAC50/60Hz;PowerSave10-120min;TipSaverautosleep;SmartHeatfixedcartridgetemps;advancedhandleSTTC/SMTC.PDF34:PS900PSCA3coilSxVsolderCxVbladeonly.

    Checked October 2, 2026

  22. Metcal MX-5210: Metcal’s catalog describes MX-PS5200 with 80 W maximum output shared dynamically in dual mode, a power display and a programmable PowerSave mode.

    Exact selected model/region. Maker settings, power ratings and package details, not measured joint temperature, sustained output, heat-up, recovery, comfort or electrical-safety results. Check current tip/handpiece and power instructions.

    Metcal MX-5210 model and specifications · Named model feature, specifications, package and parts sections
    CurrentUSMX5210listing80WMXsystemMXPS5200,1advancedhandpiece1workstand;replacementMXH1AV/gripMXH1BSS5 links;STTCaccessories.

    Metcal catalog 2022 exact MX-5210 and PS-900 rows · Named model specifications, control, package, compatibility or replacement-parts section
    PDF13-15:MX5210=MXPS5200+MXH1AV+MXW1AV;80Wmaxshareddualports,125Winput100-240VAC50/60Hz;PowerSave10-120min;TipSaverautosleep;SmartHeatfixedcartridgetemps;advancedhandleSTTC/SMTC.PDF34:PS900PSCA3coilSxVsolderCxVbladeonly.

    Checked October 2, 2026

  23. Metcal MX-5210: MX-5210 includes one advanced handpiece and one workstand; the catalog identifies MX-H1-AV and MX-W1AV, whose stand provides auto-sleep.

    Exact selected model/region. Maker settings, power ratings and package details, not measured joint temperature, sustained output, heat-up, recovery, comfort or electrical-safety results. Check current tip/handpiece and power instructions.

    Metcal MX-5210 model and specifications · Named model feature, specifications, package and parts sections
    CurrentUSMX5210listing80WMXsystemMXPS5200,1advancedhandpiece1workstand;replacementMXH1AV/gripMXH1BSS5 links;STTCaccessories.

    Metcal catalog 2022 exact MX-5210 and PS-900 rows · Named model specifications, control, package, compatibility or replacement-parts section
    PDF13-15:MX5210=MXPS5200+MXH1AV+MXW1AV;80Wmaxshareddualports,125Winput100-240VAC50/60Hz;PowerSave10-120min;TipSaverautosleep;SmartHeatfixedcartridgetemps;advancedhandleSTTC/SMTC.PDF34:PS900PSCA3coilSxVsolderCxVbladeonly.

    Checked October 2, 2026

  24. Metcal MX-5210: The catalog specifies 100–240 V AC, 50/60 Hz and 125 W rated consumption. The advanced handpiece uses STTC and SMTC cartridges; replacement grips and handpieces are cataloged.

    Exact selected model/region. Maker settings, power ratings and package details, not measured joint temperature, sustained output, heat-up, recovery, comfort or electrical-safety results. Check current tip/handpiece and power instructions.

    Metcal MX-5210 model and specifications · Named model feature, specifications, package and parts sections
    CurrentUSMX5210listing80WMXsystemMXPS5200,1advancedhandpiece1workstand;replacementMXH1AV/gripMXH1BSS5 links;STTCaccessories.

    Metcal catalog 2022 exact MX-5210 and PS-900 rows · Named model specifications, control, package, compatibility or replacement-parts section
    PDF13-15:MX5210=MXPS5200+MXH1AV+MXW1AV;80Wmaxshareddualports,125Winput100-240VAC50/60Hz;PowerSave10-120min;TipSaverautosleep;SmartHeatfixedcartridgetemps;advancedhandleSTTC/SMTC.PDF34:PS900PSCA3coilSxVsolderCxVbladeonly.

    Checked October 2, 2026

  25. X-Tronic 3020-XTS: X-Tronic lists 200–480°C settings, a Celsius/Fahrenheit switch, digital readout and a ten-minute sleep timer. The page calls it 75 W but also describes 60 W for iron heating and 15 W for electronics.

    Exact selected model/region. Maker settings, power ratings and package details, not measured joint temperature, sustained output, heat-up, recovery, comfort or electrical-safety results. Check current tip/handpiece and power instructions.

    X-Tronic 3020-XTS model and specifications · Named model feature, specifications, package and parts sections
    XTR3020XTS110/120V60Hzno220;200-480C;10minsleepautocooldown,C/FLED;75Woutputtablevs60Wiron+15Welectronicsprose;iron/base/rest/rollholder/brassandsponge.

    3020-XTS maker replacement parts · Named model specifications, control, package, compatibility or replacement-parts section
    3020seriespartslisting:3021heatingelements for3020,3030,3040,3060;originaltipassembly,cap,900Mtipassortments.Confirm exactcurrenttipassembly before genericfitassumption.

    Checked October 2, 2026

  26. X-Tronic 3020-XTS: The kit lists an iron, control base, side-mounted solder-roll holder, iron rest, brass cleaner and wet sponge.

    Exact selected model/region. Maker settings, power ratings and package details, not measured joint temperature, sustained output, heat-up, recovery, comfort or electrical-safety results. Check current tip/handpiece and power instructions.

    X-Tronic 3020-XTS model and specifications · Named model feature, specifications, package and parts sections
    XTR3020XTS110/120V60Hzno220;200-480C;10minsleepautocooldown,C/FLED;75Woutputtablevs60Wiron+15Welectronicsprose;iron/base/rest/rollholder/brassandsponge.

    3020-XTS maker replacement parts · Named model specifications, control, package, compatibility or replacement-parts section
    3020seriespartslisting:3021heatingelements for3020,3030,3040,3060;originaltipassembly,cap,900Mtipassortments.Confirm exactcurrenttipassembly before genericfitassumption.

    Checked October 2, 2026

  27. X-Tronic 3020-XTS: The maker specifies 110/120 V AC, 60 Hz with no 220 V version on this listing. Its model-series parts page catalogs 900M tips and a 3021 replacement heating element for 3020.

    Exact selected model/region. Maker settings, power ratings and package details, not measured joint temperature, sustained output, heat-up, recovery, comfort or electrical-safety results. Check current tip/handpiece and power instructions.

    X-Tronic 3020-XTS model and specifications · Named model feature, specifications, package and parts sections
    XTR3020XTS110/120V60Hzno220;200-480C;10minsleepautocooldown,C/FLED;75Woutputtablevs60Wiron+15Welectronicsprose;iron/base/rest/rollholder/brassandsponge.

    3020-XTS maker replacement parts · Named model specifications, control, package, compatibility or replacement-parts section
    3020seriespartslisting:3021heatingelements for3020,3030,3040,3060;originaltipassembly,cap,900Mtipassortments.Confirm exactcurrenttipassembly before genericfitassumption.

    Checked October 2, 2026

  28. Aoyue Int 9378 Pro: Aoyue lists digital controls, offset, programmable sleep, wake-up, system lockout and favourite settings, with a 200–480°C range.

    Exact selected model/region. Maker settings, power ratings and package details, not measured joint temperature, sustained output, heat-up, recovery, comfort or electrical-safety results. Check current tip/handpiece and power instructions.

    Aoyue Int 9378 Pro model and specifications · Named model feature, specifications, package and parts sections
    141013248-1Int9378Pro;select110-130Vvs210-240V;60Wceramicheater24V200-480C;digitaloffsetcontrols,programmablesleepwake,lockoutfavorites;autotoolrecognition;basiciron2660standpowercordmanual;extra toolsseparate;tipfamily notspecified.

    Checked October 2, 2026

  29. Aoyue Int 9378 Pro: The maker lists a 60 W ceramic-heater iron with 24 V output and a 2660 stand in the basic package.

    Exact selected model/region. Maker settings, power ratings and package details, not measured joint temperature, sustained output, heat-up, recovery, comfort or electrical-safety results. Check current tip/handpiece and power instructions.

    Aoyue Int 9378 Pro model and specifications · Named model feature, specifications, package and parts sections
    141013248-1Int9378Pro;select110-130Vvs210-240V;60Wceramicheater24V200-480C;digitaloffsetcontrols,programmablesleepwake,lockoutfavorites;autotoolrecognition;basiciron2660standpowercordmanual;extra toolsseparate;tipfamily notspecified.

    Checked October 2, 2026

  30. Aoyue Int 9378 Pro: Choose the page’s 110–130 V input selection rather than its 210–240 V variant. The maker describes multi-tool connectivity and automatic tool recognition; additional tools are separate.

    Exact selected model/region. Maker settings, power ratings and package details, not measured joint temperature, sustained output, heat-up, recovery, comfort or electrical-safety results. Check current tip/handpiece and power instructions.

    Aoyue Int 9378 Pro model and specifications · Named model feature, specifications, package and parts sections
    141013248-1Int9378Pro;select110-130Vvs210-240V;60Wceramicheater24V200-480C;digitaloffsetcontrols,programmablesleepwake,lockoutfavorites;autotoolrecognition;basiciron2660standpowercordmanual;extra toolsseparate;tipfamily notspecified.

    Checked October 2, 2026

Something changed? Help us correct the record.