Our top 10, at a glance.

Choose desktop monitor stands that support the speaker footprint and weight while placing the tweeters appropriately in the available workspace.

  1. #1IsoAcoustics ISO-155Best adjustable isolation frame
  2. #2K&M 26772 Table Monitor StandBest compact continuous-height steel stand
  3. #3Gravity SP 3102 TMBest clamp stand for a sit-stand desk
  4. #4Gator Frameworks Desktop Studio Monitor StandsBest large adjustable free-standing platform
  5. #5Kanto SP6HDBest fixed riser with cable routing
  6. #6Kanto SE6Best fixed-angle cantilever
  7. #7Ultimate Support MS-80BBest high-capacity angle-and-axis platform
  8. #8Soundrise PRO-5Best compact five-inch cantilever riser
  9. #9Genelec 8000-406 Short Table StandBest exact-fit threaded Genelec stand
  10. #10On-Stage SMS4500-P V2Best dual-mount base-or-clamp kit

All 10 picks, in order.

  1. #1

    Best adjustable isolation frame

    IsoAcoustics ISO-155

    Medium nearfields needing several height and tilt combinations in a compact footprint.

    Why it fits

    • Pair of adjustable isolation stands for medium studio monitors. [1]
    • The stands provide 14 height-and-tilt configurations, up to 6.5 degrees of tilt, and short or tall heights of 3 and 8.2 inches. [2]

    Before you choose

    • Each stand is 6.1 by 7.5 inches; capacity is 40 pounds in the short setting and 35 pounds in the tall setting. [3]

    Check before buying:

    • Manufacturer claims about sonic effects were not independently measured, and each speaker footprint still needs to be checked.

    Model: ISO-155 · Current official United States-facing product or document configuration reviewed for this comparison · United States

    Check current details at IsoAcoustics ↗

    Find on Amazon ↗

  2. #2

    Best compact continuous-height steel stand

    K&M 26772 Table Monitor Stand

    Small monitor footprints that need smooth height adjustment rather than fixed increments.

    Why it fits

    • Continuously height-adjustable steel table monitor stand with a flat base. [4]
    • Height adjusts from 6.57 to 10 inches, with four rubber pads on both the base and tray. [5]

    Before you choose

    • The tray is 5.91 by 6.69 inches and the listed maximum centered load is 33.069 pounds. [6]

    Check before buying:

    • The retained page does not provide tilt, rotation, or measured isolation performance.

    Model: 26772 · Current official United States-facing product or document configuration reviewed for this comparison · United States

    Check current details at König & Meyer ↗

    Find on Amazon ↗

  3. #3

    Best clamp stand for a sit-stand desk

    Gravity SP 3102 TM

    Desks that rise and lower together with the speakers and have a compatible rear edge.

    Why it fits

    • Height-adjustable studio-monitor stand with a compact table clamp. [7]
    • The stand rotates 360 degrees, tilts up to 15 degrees in either direction, and has an EVA-padded shelf with anti-tip protection. [8]

    Before you choose

    • The clamp accepts tabletops up to 100 millimeters thick and the speaker shelf measures 250 by 250 millimeters. [9]

    Check before buying:

    • The retained page does not publish a maximum speaker weight; desk strength, edge shape, and clearance require separate checks.

    Model: SP 3102 TM · Current official United States-facing product or document configuration reviewed for this comparison · United States

    Check current details at Gravity ↗

    Find on Amazon ↗

  4. #4

    Best large adjustable free-standing platform

    Gator Frameworks Desktop Studio Monitor Stands

    Larger desktop monitors that fit a 12-by-9-inch platform and need more than ten inches of rise.

    Why it fits

    • Pair of free-standing height- and tilt-adjustable desktop studio-monitor stands. [10]
    • Height adjusts from 10.5 to 14 inches and the platform tilts from 0 to 15 degrees. [11]

    Before you choose

    • Each EVA-lined platform is 12 by 9 inches and the catalog lists a 60-pound maximum capacity. [12]

    Check before buying:

    • The catalog does not establish measured isolation, bump resistance, or fit for a speaker whose center of mass extends beyond the platform.

    Model: GFWSPKSTMNDSK · Current official United States-facing product or document configuration reviewed for this comparison · United States

    Check current details at Gator Frameworks ↗

    Find on Amazon ↗

  5. #5

    Best fixed riser with cable routing

    Kanto SP6HD

    Speakers that fit one of two top plates and benefit from a hollow column for cable management.

    Why it fits

    • Pair of fixed six-inch steel desktop speaker stands with cable-routing columns. [13]
    • Each stand includes 4.3-by-7.1-inch and 7-by-7-inch top plates with closed-cell foam padding. [14]

    Before you choose

    • Kanto lists a 30-pound capacity per stand and includes a quarter-inch-20 screw for compatible speakers. [15]

    Check before buying:

    • The retained page does not establish measured isolation or screw compatibility beyond speakers with a matching threaded insert.

    Model: SP6HD · Current official United States-facing product or document configuration reviewed for this comparison · United States

    Check current details at Kanto ↗

    Find on Amazon ↗

  6. #6

    Best fixed-angle cantilever

    Kanto SE6

    A clean desktop that needs a shallow upward aim and open storage space below each speaker.

    Why it fits

    • Pair of fixed cantilever desktop speaker stands with a six-degree upward angle. [16]
    • The cantilever uses 2.5-millimeter silicone padding and leaves usable desk space below the speaker. [17]

    Before you choose

    • The product sheet shows a 5.3-inch-wide upper support and includes mounting screws for compatible speakers. [18]

    Check before buying:

    • The product sheet does not establish fit for every monitor footprint or measured vibration reduction.

    Model: SE6 · Current official United States-facing product or document configuration reviewed for this comparison · United States

    Check current details at Kanto ↗

    Find on Amazon ↗

  7. #7

    Best high-capacity angle-and-axis platform

    Ultimate Support MS-80B

    Heavy monitors that fit the broad base and need aiming adjustment without a tall riser.

    Why it fits

    • Desktop monitor stand with adjustable angle and axis. [19]
    • An absorptive foam platform and rubber-covered spiked feet provide multiple mechanical interfaces with the desk and speaker. [20]

    Before you choose

    • Ultimate Support lists a 75-pound capacity and a base measuring 10.25 by 11.75 inches. [21]

    Check before buying:

    • The retained page does not publish the supported speaker footprint or independently measured decoupling.

    Model: MS-80B · Current official United States-facing product or document configuration reviewed for this comparison · United States

    Check current details at Ultimate Support ↗

    Find on Amazon ↗

  8. #8

    Best compact five-inch cantilever riser

    Soundrise PRO-5

    Five-inch-class monitors that fit a narrow plate and need open desk space below.

    Why it fits

    • Pair of C-shaped aluminum desktop monitor risers with a fixed incline. [22]
    • The stand provides a five-inch rise, five-degree incline, and open space below the speaker. [23]

    Before you choose

    • Each 6.5-by-5.4-inch top plate supports up to 18 pounds according to the maker. [24]

    Check before buying:

    • The retained page does not establish fit for every five-inch monitor or independently measured vibration reduction.

    Model: PRO-5 · Current official United States-facing product or document configuration reviewed for this comparison · United States

    Check current details at Soundrise ↗

    Find on Amazon ↗

  9. #9

    Best exact-fit threaded Genelec stand

    Genelec 8000-406 Short Table Stand

    Owners of a listed Genelec model who want a heavy short stand built around the brand’s mounting system.

    Why it fits

    • Short cast-iron table stand with a threaded tube-top mount. [25]
    • The stand is 170 millimeters high with a 180-millimeter circular base and an anti-vibration rubber ring. [26]

    Before you choose

    • Its tube top uses a 3/8-inch thread, and Genelec publishes a specific compatibility list covering selected 8000, 8300, 4000, and G Series models. [27]

    Check before buying:

    • Some listed speakers require a separate stand plate, and the page does not make this a universal platform stand.

    Model: 8000-406 · Current official United States-facing product or document configuration reviewed for this comparison · United States

    Check current details at Genelec ↗

    Find on Amazon ↗

  10. #10

    Best dual-mount base-or-clamp kit

    On-Stage SMS4500-P V2

    A studio that wants to test flat-base and clamp mounting with one pair of stands.

    Why it fits

    • Pair of adjustable desktop monitor stands supplied with both flat bases and desk clamps. [28]
    • The assembly uses padded platforms, angle-adjustment knobs, height-adjustment pins, shafts, rubber feet, bases, and clamps. [29]

    Before you choose

    • The official instructions show two complete stand assemblies and require the user to follow the stated assembly and weight-capacity warnings. [30]

    Check before buying:

    • The retained official instructions do not provide platform dimensions, clamp range, or the numeric weight capacity in extractable text.

    Model: SMS4500-P V2 · Current official United States-facing product or document configuration reviewed for this comparison · United States

    Check current details at On-Stage ↗

    Find on Amazon ↗

The details, side by side.

Published specifications and features
What matters#1IsoAcoustics ISO-155#2K&M 26772 Table Monitor Stand#3Gravity SP 3102 TM#4Gator Frameworks Desktop Studio Monitor Stands#5Kanto SP6HD#6Kanto SE6#7Ultimate Support MS-80B#8Soundrise PRO-5#9Genelec 8000-406 Short Table Stand#10On-Stage SMS4500-P V2
TypePair of adjustable isolation stands for medium studio monitors. [1]Continuously height-adjustable steel table monitor stand with a flat base. [4]Height-adjustable studio-monitor stand with a compact table clamp. [7]Pair of free-standing height- and tilt-adjustable desktop studio-monitor stands. [10]Pair of fixed six-inch steel desktop speaker stands with cable-routing columns. [13]Pair of fixed cantilever desktop speaker stands with a six-degree upward angle. [16]Desktop monitor stand with adjustable angle and axis. [19]Pair of C-shaped aluminum desktop monitor risers with a fixed incline. [22]Short cast-iron table stand with a threaded tube-top mount. [25]Pair of adjustable desktop monitor stands supplied with both flat bases and desk clamps. [28]
DesignThe stands provide 14 height-and-tilt configurations, up to 6.5 degrees of tilt, and short or tall heights of 3 and 8.2 inches. [2]Height adjusts from 6.57 to 10 inches, with four rubber pads on both the base and tray. [5]The stand rotates 360 degrees, tilts up to 15 degrees in either direction, and has an EVA-padded shelf with anti-tip protection. [8]Height adjusts from 10.5 to 14 inches and the platform tilts from 0 to 15 degrees. [11]Each stand includes 4.3-by-7.1-inch and 7-by-7-inch top plates with closed-cell foam padding. [14]The cantilever uses 2.5-millimeter silicone padding and leaves usable desk space below the speaker. [17]An absorptive foam platform and rubber-covered spiked feet provide multiple mechanical interfaces with the desk and speaker. [20]The stand provides a five-inch rise, five-degree incline, and open space below the speaker. [23]The stand is 170 millimeters high with a 180-millimeter circular base and an anti-vibration rubber ring. [26]The assembly uses padded platforms, angle-adjustment knobs, height-adjustment pins, shafts, rubber feet, bases, and clamps. [29]
FitEach stand is 6.1 by 7.5 inches; capacity is 40 pounds in the short setting and 35 pounds in the tall setting. [3]The tray is 5.91 by 6.69 inches and the listed maximum centered load is 33.069 pounds. [6]The clamp accepts tabletops up to 100 millimeters thick and the speaker shelf measures 250 by 250 millimeters. [9]Each EVA-lined platform is 12 by 9 inches and the catalog lists a 60-pound maximum capacity. [12]Kanto lists a 30-pound capacity per stand and includes a quarter-inch-20 screw for compatible speakers. [15]The product sheet shows a 5.3-inch-wide upper support and includes mounting screws for compatible speakers. [18]Ultimate Support lists a 75-pound capacity and a base measuring 10.25 by 11.75 inches. [21]Each 6.5-by-5.4-inch top plate supports up to 18 pounds according to the maker. [24]Its tube top uses a 3/8-inch thread, and Genelec publishes a specific compatibility list covering selected 8000, 8300, 4000, and G Series models. [27]The official instructions show two complete stand assemblies and require the user to follow the stated assembly and weight-capacity warnings. [30]

Measure the speaker and the desk together

Check speaker width, depth, weight, and mounting inserts against the platform or exact compatibility list. Then verify base footprint, clamp clearance, desktop thickness, and room behind the desk. [3] [6] [9] [12] [15] [18] [21] [24] [27] [30]

Set height before relying on tilt

Adjustable stands make it easier to bring the listening axis toward ear level. Fixed risers and inclined cantilevers work best when their built-in height and angle already match the chair, desk, and monitor geometry. [2] [5] [8] [11] [14] [17] [20] [23] [26] [29]

Separate placement from isolation claims

A stand can raise, aim, or clamp a monitor, and some include foam, silicone, rubber, or isolation frames. None of those features alone proves the room response; desk reflections and final speaker placement still need listening or measurement in the actual room. [1] [4] [7] [10] [13] [16] [19] [22] [25] [28]

How we compared.

Source-based desk research from current official manufacturer pages, catalogs, and manuals reviewed September 22, 2026. A focused reading of audio-engineering discussions shaped checks for tweeter height, platform fit, desk reflections, clamp clearance, and sit-stand movement; anecdotes are not treated as product-specific proof or owner consensus. Ranking distinguishes isolation frames, fixed risers, adjustable bases, clamp mounts, exact-fit threaded stands, and compact cantilevers without claiming measured acoustic improvement, stability under impact, or universal speaker compatibility.

How we choose

Sources

Official product documentation, reviewed September 22, 2026.

IsoAcoustics ISO-155 official product page ↗

IsoAcoustics · United States · Read September 22, 2026

K&M 26772 official US product page ↗

König & Meyer · United States · Read September 22, 2026

Gravity SP 3102 TM official product page ↗

Gravity / Adam Hall Group · United States · Read September 22, 2026

Gator Frameworks official product catalog ↗

Gator · United States · Read September 22, 2026

Kanto SP desktop stands official product page ↗

Kanto Audio · United States · Read September 22, 2026

Kanto SE6 official product sheet ↗

Kanto Audio · United States · Read September 22, 2026

Ultimate Support MS-80B official product page ↗

Ultimate Support · United States · Read September 22, 2026

Soundrise PRO-5 official product page ↗

Soundrise · United States · Read September 22, 2026

Genelec 8000-406 official product page ↗

Genelec · United States · Read September 22, 2026

On-Stage SMS4500-P V2 official instructions ↗

On-Stage · United States · Read September 22, 2026

Detailed source notes
  1. IsoAcoustics ISO-155: Pair of adjustable isolation stands for medium studio monitors.

    Manufacturer-stated for IsoAcoustics ISO-155; verify exact model, dimensions, mounting surface, connected equipment, and intended use before purchase.

    IsoAcoustics ISO-155 official product page · Type field in retained evidence note from the official source.
    Pair of adjustable isolation stands for medium studio monitors.

    Checked September 22, 2026

  2. IsoAcoustics ISO-155: The stands provide 14 height-and-tilt configurations, up to 6.5 degrees of tilt, and short or tall heights of 3 and 8.2 inches.

    Manufacturer-stated for IsoAcoustics ISO-155; verify exact model, dimensions, mounting surface, connected equipment, and intended use before purchase.

    IsoAcoustics ISO-155 official product page · Design field in retained evidence note from the official source.
    The stands provide 14 height-and-tilt configurations, up to 6.5 degrees of tilt, and short or tall heights of 3 and 8.2 inches.

    Checked September 22, 2026

  3. IsoAcoustics ISO-155: Each stand is 6.1 by 7.5 inches; capacity is 40 pounds in the short setting and 35 pounds in the tall setting.

    Manufacturer-stated for IsoAcoustics ISO-155; verify exact model, dimensions, mounting surface, connected equipment, and intended use before purchase.

    IsoAcoustics ISO-155 official product page · Fit field in retained evidence note from the official source.
    Each stand is 6.1 by 7.5 inches; capacity is 40 pounds in the short setting and 35 pounds in the tall setting.

    Checked September 22, 2026

  4. K&M 26772 Table Monitor Stand: Continuously height-adjustable steel table monitor stand with a flat base.

    Manufacturer-stated for K&M 26772 Table Monitor Stand; verify exact model, dimensions, mounting surface, connected equipment, and intended use before purchase.

    K&M 26772 official US product page · Type field in retained evidence note from the official source.
    Continuously height-adjustable steel table monitor stand with a flat base.

    Checked September 22, 2026

  5. K&M 26772 Table Monitor Stand: Height adjusts from 6.57 to 10 inches, with four rubber pads on both the base and tray.

    Manufacturer-stated for K&M 26772 Table Monitor Stand; verify exact model, dimensions, mounting surface, connected equipment, and intended use before purchase.

    K&M 26772 official US product page · Design field in retained evidence note from the official source.
    Height adjusts from 6.57 to 10 inches, with four rubber pads on both the base and tray.

    Checked September 22, 2026

  6. K&M 26772 Table Monitor Stand: The tray is 5.91 by 6.69 inches and the listed maximum centered load is 33.069 pounds.

    Manufacturer-stated for K&M 26772 Table Monitor Stand; verify exact model, dimensions, mounting surface, connected equipment, and intended use before purchase.

    K&M 26772 official US product page · Fit field in retained evidence note from the official source.
    The tray is 5.91 by 6.69 inches and the listed maximum centered load is 33.069 pounds.

    Checked September 22, 2026

  7. Gravity SP 3102 TM: Height-adjustable studio-monitor stand with a compact table clamp.

    Manufacturer-stated for Gravity SP 3102 TM; verify exact model, dimensions, mounting surface, connected equipment, and intended use before purchase.

    Gravity SP 3102 TM official product page · Type field in retained evidence note from the official source.
    Height-adjustable studio-monitor stand with a compact table clamp.

    Checked September 22, 2026

  8. Gravity SP 3102 TM: The stand rotates 360 degrees, tilts up to 15 degrees in either direction, and has an EVA-padded shelf with anti-tip protection.

    Manufacturer-stated for Gravity SP 3102 TM; verify exact model, dimensions, mounting surface, connected equipment, and intended use before purchase.

    Gravity SP 3102 TM official product page · Design field in retained evidence note from the official source.
    The stand rotates 360 degrees, tilts up to 15 degrees in either direction, and has an EVA-padded shelf with anti-tip protection.

    Checked September 22, 2026

  9. Gravity SP 3102 TM: The clamp accepts tabletops up to 100 millimeters thick and the speaker shelf measures 250 by 250 millimeters.

    Manufacturer-stated for Gravity SP 3102 TM; verify exact model, dimensions, mounting surface, connected equipment, and intended use before purchase.

    Gravity SP 3102 TM official product page · Fit field in retained evidence note from the official source.
    The clamp accepts tabletops up to 100 millimeters thick and the speaker shelf measures 250 by 250 millimeters.

    Checked September 22, 2026

  10. Gator Frameworks Desktop Studio Monitor Stands: Pair of free-standing height- and tilt-adjustable desktop studio-monitor stands.

    Manufacturer-stated for Gator Frameworks Desktop Studio Monitor Stands; verify exact model, dimensions, mounting surface, connected equipment, and intended use before purchase.

    Gator Frameworks official product catalog · Type field in retained evidence note from the official source.
    Pair of free-standing height- and tilt-adjustable desktop studio-monitor stands.

    Checked September 22, 2026

  11. Gator Frameworks Desktop Studio Monitor Stands: Height adjusts from 10.5 to 14 inches and the platform tilts from 0 to 15 degrees.

    Manufacturer-stated for Gator Frameworks Desktop Studio Monitor Stands; verify exact model, dimensions, mounting surface, connected equipment, and intended use before purchase.

    Gator Frameworks official product catalog · Design field in retained evidence note from the official source.
    Height adjusts from 10.5 to 14 inches and the platform tilts from 0 to 15 degrees.

    Checked September 22, 2026

  12. Gator Frameworks Desktop Studio Monitor Stands: Each EVA-lined platform is 12 by 9 inches and the catalog lists a 60-pound maximum capacity.

    Manufacturer-stated for Gator Frameworks Desktop Studio Monitor Stands; verify exact model, dimensions, mounting surface, connected equipment, and intended use before purchase.

    Gator Frameworks official product catalog · Fit field in retained evidence note from the official source.
    Each EVA-lined platform is 12 by 9 inches and the catalog lists a 60-pound maximum capacity.

    Checked September 22, 2026

  13. Kanto SP6HD: Pair of fixed six-inch steel desktop speaker stands with cable-routing columns.

    Manufacturer-stated for Kanto SP6HD; verify exact model, dimensions, mounting surface, connected equipment, and intended use before purchase.

    Kanto SP desktop stands official product page · Type field in retained evidence note from the official source.
    Pair of fixed six-inch steel desktop speaker stands with cable-routing columns.

    Checked September 22, 2026

  14. Kanto SP6HD: Each stand includes 4.3-by-7.1-inch and 7-by-7-inch top plates with closed-cell foam padding.

    Manufacturer-stated for Kanto SP6HD; verify exact model, dimensions, mounting surface, connected equipment, and intended use before purchase.

    Kanto SP desktop stands official product page · Design field in retained evidence note from the official source.
    Each stand includes 4.3-by-7.1-inch and 7-by-7-inch top plates with closed-cell foam padding.

    Checked September 22, 2026

  15. Kanto SP6HD: Kanto lists a 30-pound capacity per stand and includes a quarter-inch-20 screw for compatible speakers.

    Manufacturer-stated for Kanto SP6HD; verify exact model, dimensions, mounting surface, connected equipment, and intended use before purchase.

    Kanto SP desktop stands official product page · Fit field in retained evidence note from the official source.
    Kanto lists a 30-pound capacity per stand and includes a quarter-inch-20 screw for compatible speakers.

    Checked September 22, 2026

  16. Kanto SE6: Pair of fixed cantilever desktop speaker stands with a six-degree upward angle.

    Manufacturer-stated for Kanto SE6; verify exact model, dimensions, mounting surface, connected equipment, and intended use before purchase.

    Kanto SE6 official product sheet · Type field in retained evidence note from the official source.
    Pair of fixed cantilever desktop speaker stands with a six-degree upward angle.

    Checked September 22, 2026

  17. Kanto SE6: The cantilever uses 2.5-millimeter silicone padding and leaves usable desk space below the speaker.

    Manufacturer-stated for Kanto SE6; verify exact model, dimensions, mounting surface, connected equipment, and intended use before purchase.

    Kanto SE6 official product sheet · Design field in retained evidence note from the official source.
    The cantilever uses 2.5-millimeter silicone padding and leaves usable desk space below the speaker.

    Checked September 22, 2026

  18. Kanto SE6: The product sheet shows a 5.3-inch-wide upper support and includes mounting screws for compatible speakers.

    Manufacturer-stated for Kanto SE6; verify exact model, dimensions, mounting surface, connected equipment, and intended use before purchase.

    Kanto SE6 official product sheet · Fit field in retained evidence note from the official source.
    The product sheet shows a 5.3-inch-wide upper support and includes mounting screws for compatible speakers.

    Checked September 22, 2026

  19. Ultimate Support MS-80B: Desktop monitor stand with adjustable angle and axis.

    Manufacturer-stated for Ultimate Support MS-80B; verify exact model, dimensions, mounting surface, connected equipment, and intended use before purchase.

    Ultimate Support MS-80B official product page · Type field in retained evidence note from the official source.
    Desktop monitor stand with adjustable angle and axis.

    Checked September 22, 2026

  20. Ultimate Support MS-80B: An absorptive foam platform and rubber-covered spiked feet provide multiple mechanical interfaces with the desk and speaker.

    Manufacturer-stated for Ultimate Support MS-80B; verify exact model, dimensions, mounting surface, connected equipment, and intended use before purchase.

    Ultimate Support MS-80B official product page · Design field in retained evidence note from the official source.
    An absorptive foam platform and rubber-covered spiked feet provide multiple mechanical interfaces with the desk and speaker.

    Checked September 22, 2026

  21. Ultimate Support MS-80B: Ultimate Support lists a 75-pound capacity and a base measuring 10.25 by 11.75 inches.

    Manufacturer-stated for Ultimate Support MS-80B; verify exact model, dimensions, mounting surface, connected equipment, and intended use before purchase.

    Ultimate Support MS-80B official product page · Fit field in retained evidence note from the official source.
    Ultimate Support lists a 75-pound capacity and a base measuring 10.25 by 11.75 inches.

    Checked September 22, 2026

  22. Soundrise PRO-5: Pair of C-shaped aluminum desktop monitor risers with a fixed incline.

    Manufacturer-stated for Soundrise PRO-5; verify exact model, dimensions, mounting surface, connected equipment, and intended use before purchase.

    Soundrise PRO-5 official product page · Type field in retained evidence note from the official source.
    Pair of C-shaped aluminum desktop monitor risers with a fixed incline.

    Checked September 22, 2026

  23. Soundrise PRO-5: The stand provides a five-inch rise, five-degree incline, and open space below the speaker.

    Manufacturer-stated for Soundrise PRO-5; verify exact model, dimensions, mounting surface, connected equipment, and intended use before purchase.

    Soundrise PRO-5 official product page · Design field in retained evidence note from the official source.
    The stand provides a five-inch rise, five-degree incline, and open space below the speaker.

    Checked September 22, 2026

  24. Soundrise PRO-5: Each 6.5-by-5.4-inch top plate supports up to 18 pounds according to the maker.

    Manufacturer-stated for Soundrise PRO-5; verify exact model, dimensions, mounting surface, connected equipment, and intended use before purchase.

    Soundrise PRO-5 official product page · Fit field in retained evidence note from the official source.
    Each 6.5-by-5.4-inch top plate supports up to 18 pounds according to the maker.

    Checked September 22, 2026

  25. Genelec 8000-406 Short Table Stand: Short cast-iron table stand with a threaded tube-top mount.

    Manufacturer-stated for Genelec 8000-406 Short Table Stand; verify exact model, dimensions, mounting surface, connected equipment, and intended use before purchase.

    Genelec 8000-406 official product page · Type field in retained evidence note from the official source.
    Short cast-iron table stand with a threaded tube-top mount.

    Checked September 22, 2026

  26. Genelec 8000-406 Short Table Stand: The stand is 170 millimeters high with a 180-millimeter circular base and an anti-vibration rubber ring.

    Manufacturer-stated for Genelec 8000-406 Short Table Stand; verify exact model, dimensions, mounting surface, connected equipment, and intended use before purchase.

    Genelec 8000-406 official product page · Design field in retained evidence note from the official source.
    The stand is 170 millimeters high with a 180-millimeter circular base and an anti-vibration rubber ring.

    Checked September 22, 2026

  27. Genelec 8000-406 Short Table Stand: Its tube top uses a 3/8-inch thread, and Genelec publishes a specific compatibility list covering selected 8000, 8300, 4000, and G Series models.

    Manufacturer-stated for Genelec 8000-406 Short Table Stand; verify exact model, dimensions, mounting surface, connected equipment, and intended use before purchase.

    Genelec 8000-406 official product page · Fit field in retained evidence note from the official source.
    Its tube top uses a 3/8-inch thread, and Genelec publishes a specific compatibility list covering selected 8000, 8300, 4000, and G Series models.

    Checked September 22, 2026

  28. On-Stage SMS4500-P V2: Pair of adjustable desktop monitor stands supplied with both flat bases and desk clamps.

    Manufacturer-stated for On-Stage SMS4500-P V2; verify exact model, dimensions, mounting surface, connected equipment, and intended use before purchase.

    On-Stage SMS4500-P V2 official instructions · Type field in retained evidence note from the official source.
    Pair of adjustable desktop monitor stands supplied with both flat bases and desk clamps.

    Checked September 22, 2026

  29. On-Stage SMS4500-P V2: The assembly uses padded platforms, angle-adjustment knobs, height-adjustment pins, shafts, rubber feet, bases, and clamps.

    Manufacturer-stated for On-Stage SMS4500-P V2; verify exact model, dimensions, mounting surface, connected equipment, and intended use before purchase.

    On-Stage SMS4500-P V2 official instructions · Design field in retained evidence note from the official source.
    The assembly uses padded platforms, angle-adjustment knobs, height-adjustment pins, shafts, rubber feet, bases, and clamps.

    Checked September 22, 2026

  30. On-Stage SMS4500-P V2: The official instructions show two complete stand assemblies and require the user to follow the stated assembly and weight-capacity warnings.

    Manufacturer-stated for On-Stage SMS4500-P V2; verify exact model, dimensions, mounting surface, connected equipment, and intended use before purchase.

    On-Stage SMS4500-P V2 official instructions · Fit field in retained evidence note from the official source.
    The official instructions show two complete stand assemblies and require the user to follow the stated assembly and weight-capacity warnings.

    Checked September 22, 2026

Something changed? Help us correct the record.