Our top 10, at a glance.
Choose a plunge track saw and matching rail setup for sizing wood-based panels, balancing usable depth, included accessories, power platform and transport.
- #1Makita SP6000J1Makita SP6000J1
- #2Festool TS 55 FEQ-F-PlusFestool TS 55 FEQ-F-Plus
- #3Milwaukee M18 FUEL 2831-21Milwaukee M18 FUEL 2831-21
- #4DEWALT DCS520ST1DEWALT DCS520ST1
- #5Bosch GKT18V-20GCLBosch GKT18V-20GCL
- #6Metabo HPT C3606DPAMetabo HPT C3606DPA
- #7RYOBI PTS01KRYOBI PTS01K
- #8Festool TS 60 KEB-F-PlusFestool TS 60 KEB-F-Plus
- #9WEN CT1274WEN CT1274
- #10WEN CT1065WEN CT1065
All 10 picks, in order.
- #1
Makita SP6000J1
Makita SP6000J1
A corded starter kit with its rail included
Why it fits
- Makita leads for a practical starting package: the SP6000J1 includes the SP6000J 12A saw, a 55-inch Makita rail and a MAKPAC case. The included 6-1/2-inch, 48-tooth blade suits a buyer assembling the saw and guidance together. Bevel travel is -1° to 48°, with 22.5° and 45° stops. Makita lists maximum depths of 2-3/16 inches square and 1-9/16 inches at 45°, but the page does not explicitly identify the rail basis. Confirm usable on-rail depth for a close-capacity cut. A locking lever holds the blade-changing position, with an onboard hex wrench. A rear vacuum port provides an extraction connection; verify the hose fit because the page gives differing port diameters. The cord and separate rail need room during transport. [1] [2] [3]
Model: US SP6000J1; corded saw, 55-inch rail and case · One selected US physical plunge track saw; kit accessories and rails are not additional picks. · US
- #2
Festool TS 55 FEQ-F-Plus
Festool TS 55 FEQ-F-Plus
A dual depth scale and FastFix blade changes
Why it fits
- TS 55 suits buyers building a Festool FS rail system. The selected 576708 includes a 160mm fine-cut blade, sight window, splinter guard, hex key, power cord and Systainer. A guide rail is separate. The manual distinguishes 55mm maximum square depth without a rail from 51mm with an FS rail. Bevel range is -1° to 47°. The page lists 43mm maximum at 45° without separately specifying an on-rail 45° value; verify that value if it decides the purchase. FastFix provides a spindle stop for blade changes, and the dust connection is listed at 27/36mm. Choose the exact FS rail length and extraction hose before buying. The dual scale helps distinguish rail and free-base settings, while the case stores the saw separately from its long rail. [4] [5] [6]
Model: US 576708; 120V saw in Systainer, rail separate · One selected US physical plunge track saw; kit accessories and rails are not additional picks. · US
- #3
Milwaukee M18 FUEL 2831-21
Milwaukee M18 FUEL 2831-21
An M18 kit with battery and transport box
Why it fits
- 2831-21 suits a buyer choosing an M18 power setup and PACKOUT storage. Its kit includes the 6-1/2-inch saw, HIGH OUTPUT XC6.0 battery, rapid charger and PACKOUT XL box. A guide rail is not listed among those kit contents. The manual gives -1° to 48° bevel travel and separate depth pointers for using or omitting a rail. Its capacity table does not clearly label the rail basis and pairs differing inch/metric values at 45°. Confirm usable depth for your rail and bevel rather than treating the headline as on-track capacity. A blade-change lever locks the saw at the access window; blade removal uses a spindle lock and wrench. The rear dust port rotates to accommodate a vacuum hose or bag. Buy a matched Milwaukee rail of suitable length separately and account for the battery, hose and rail in transport. [7] [8] [9]
Model: US 2831-21; saw, 6.0Ah battery, rapid charger and PACKOUT · One selected US physical plunge track saw; kit accessories and rails are not additional picks. · US
- #4
DEWALT DCS520ST1
DEWALT DCS520ST1
A cordless package with a 59-inch rail
Why it fits
- DCS520ST1 supplies the DCS520 saw, FLEXVOLT battery, DCB118 charger, TSTAK box, 6-1/2-inch 42-tooth blade and DWS5022 59-inch rail. It suits buyers who want cordless power and the matching rail in one selected package. The page explicitly gives on-track depths of 2-1/8 inches square and 1-5/8 inches at 45°. The manual gives 55mm on-rail square depth while the page states 54mm, so confirm a close-capacity cut. Bevel adjustment is 0° to 47°. Blade changes use a spindle lock and lever, with a hex wrench stored in the front handle; the outer cover need not be removed. A dust port supports extraction. Use the specified FLEXVOLT power system rather than assuming an ordinary 20V MAX pack works, and match hose fit before purchase. [10] [11] [12]
Model: US DCS520ST1; FLEXVOLT kit with 59-inch rail · One selected US physical plunge track saw; kit accessories and rails are not additional picks. · US
- #5
Bosch GKT18V-20GCL
Bosch GKT18V-20GCL
A smaller blade with documented FSN rail options
Why it fits
- Bosch suits existing Bosch 18V/AMPShare users choosing a smaller 140mm blade. The bare-tool package includes a blade, wrench, dust bag, VAC024 adapter and L-BOXX. Battery, charger and FSN guide rail are separate. The manual lists FSN 800, 1100, 1600 and 2100 rails at 31.5, 43.3, 63 and 82.7 inches. Bevel adjustment extends from -1° to 47°. Its depth table lists 52mm square and 32mm at 45° without explicitly labeling the rail basis; confirm your usable on-rail capacity. Front and rear adjustments set rail fit. VAC024 is specified for 1-1/4 or 1-1/2-inch vacuum hoses; VAC002 explicitly does not fit. Choose the exact adapter combination rather than assuming a hose match. The smaller blade uses a 20mm bore, with blade removal addressed by the manual’s spindle-lock and wrench procedure. [13] [14] [15]
Model: US GKT18V-20GCL; 18V bare saw in L-BOXX · One selected US physical plunge track saw; kit accessories and rails are not additional picks. · US
- #6
Metabo HPT C3606DPA
Metabo HPT C3606DPA
Battery operation with an optional AC adapter
Why it fits
- C3606DPA suits a buyer who wants 36V MultiVolt battery operation and the option of the separately sold ET36A AC adapter. The kit supplies a 4.0Ah 36V battery, USB-equipped rapid charger, case, 6-1/2-inch blade and wrench. Matched optional rails include 31.5-inch 629010000 and 63-inch 379258M; the connector is separate. Bevel range is -1° to 46°. The page lists 2-3/5-inch square and 1-7/10-inch 45° capacities without identifying the rail basis. Verify on-rail depth for the chosen setup. A micro-adjust depth dial, blade window and 360° swiveling dust port provide useful setup controls. The dust bag is optional. Confirm hose fit and the exact blade-change procedure; an included wrench alone does not establish tool-free changes. Carry the rail separately from the supplied saw case. [16] [17] [18]
Model: US C3606DPA; 36V MultiVolt saw kit, rail separate · One selected US physical plunge track saw; kit accessories and rails are not additional picks. · US
- #7
RYOBI PTS01K
RYOBI PTS01K
Short rail sections for an ONE+ kit
Why it fits
- PTS01K suits buyers who want an 18V ONE+ kit with its tracks supplied. It includes a 4.0Ah battery, charger and two 27.5-inch track sections that join to 55 inches. The split rail arrangement is useful when packing shorter components. The manual specifies on-track depths of 1-15/16 inches square and 1-7/16 inches at 45°, versus 2-1/8 and 1-9/16 inches without the track. Bevel range is -1° to 48°. Joined track length is not a guarantee of that much finished cutting travel. Rail-fit and anti-tip adjustments accompany dust connections for 1-1/4 or 1-7/8-inch hoses. Blade changing uses a dedicated plunge-depth lever position, spindle lock and supplied wrench. Confirm the joined-track alignment and extractor setup rather than expecting a dust-capture or finished-edge guarantee. [19] [20] [21]
Model: US PTS01K; ONE+ HP kit with two 27.5-inch tracks · One selected US physical plunge track saw; kit accessories and rails are not additional picks. · US
- #8
Festool TS 60 KEB-F-Plus
Festool TS 60 KEB-F-Plus
More FS-rail square depth with FSK compatibility
Why it fits
- TS 60 is a distinct 168mm-blade saw for buyers wanting more documented square depth on Festool FS rails. The selected 576726 includes a fine-cut blade, window, splinter guard, hex key and Systainer. Rails are separate, with both FS and FSK systems supported. The manual gives 62mm maximum square depth without a rail and 57mm with an FS rail. Bevel range is -1° to 47°; the page gives 45mm maximum at 45° without separately establishing on-rail 45° capacity. Confirm that capacity for a thick bevel cut. FastFix provides a spindle lock for blade changes, and the extraction connection is 27/36mm. Its 120V corded setup needs an outlet and hose routing. Choose rail length for panels or the exact compatible FSK arrangement for crosscuts; neither rail type is included in this selection. [22] [23] [24]
Model: US 576726; 120V saw in Systainer, rail separate · One selected US physical plunge track saw; kit accessories and rails are not additional picks. · US
- #9
WEN CT1274
WEN CT1274
A larger blade and variable-speed corded setup
Why it fits
- CT1274 suits buyers who want a 7-1/4-inch blade and a 2,000–6,000 RPM speed dial in a corded track saw. The 12A saw includes a 40-tooth blade and a swiveling dust adapter. WEN CT9502 100-inch or CT9110 110-inch tracks are separate. The manual specifies 2.44-inch square and 1.73-inch 45° depths with a track. Without the track, those figures are 2.64 and 1.85 inches. Bevel travel is 0° to 45°. Match the on-track figure to the material rather than using the larger free-base headline. The blade has a 5/8-inch arbor, and the mode selector has a blade-change setting. The dust port rotates 360°. Choose the matched rail, connectors and hose as part of the purchase; the saw package does not supply the long-track setup. [25] [26] [27]
Model: US CT1274; 12A corded saw, rail separate · One selected US physical plunge track saw; kit accessories and rails are not additional picks. · US
- #10
WEN CT1065
WEN CT1065
A 6-1/2-inch corded setup with three blade modes
Why it fits
- CT1065 suits buyers choosing WEN’s 10A corded, 6-1/2-inch saw with a separately purchased CT9502 track. That track comprises two 50-inch sections with joining adapters. The saw includes a 24-tooth blade and scoring, full-plunge and blade-change modes. The manual gives on-track depths of 2.13 inches square and 1.50 inches at 45°, versus 2.32 and 1.65 inches without the track. Bevel travel is 0° to 45°. These are the manual’s capacities, not a measured cut-quality result. A rear dust port connects to extraction equipment. Replacement-blade fit needs confirmation: the product page and manual specification table list a 20mm arbor, while a manual safety paragraph says 22mm. Resolve that conflict with WEN before buying replacement blades. Rails, clamps and the hose are separate. [28] [29] [30]
Model: US CT1065; 10A corded saw, rail separate · One selected US physical plunge track saw; kit accessories and rails are not additional picks. · US
The details, side by side.
| What matters | #1Makita SP6000J1 | #2Festool TS 55 FEQ-F-Plus | #3Milwaukee M18 FUEL 2831-21 | #4DEWALT DCS520ST1 | #5Bosch GKT18V-20GCL | #6Metabo HPT C3606DPA | #7RYOBI PTS01K | #8Festool TS 60 KEB-F-Plus | #9WEN CT1274 | #10WEN CT1065 |
|---|---|---|---|---|---|---|---|---|---|---|
| Workflow | Makita leads for a practical starting package: the SP6000J1 includes the SP6000J 12A saw, a 55-inch Makita rail and a MAKPAC case. The included 6-1/2-inch, 48-tooth blade suits a buyer assembling the saw and guidance together. [1] | TS 55 suits buyers building a Festool FS rail system. The selected 576708 includes a 160mm fine-cut blade, sight window, splinter guard, hex key, power cord and Systainer. A guide rail is separate. [4] | 2831-21 suits a buyer choosing an M18 power setup and PACKOUT storage. Its kit includes the 6-1/2-inch saw, HIGH OUTPUT XC6.0 battery, rapid charger and PACKOUT XL box. A guide rail is not listed among those kit contents. [7] | DCS520ST1 supplies the DCS520 saw, FLEXVOLT battery, DCB118 charger, TSTAK box, 6-1/2-inch 42-tooth blade and DWS5022 59-inch rail. It suits buyers who want cordless power and the matching rail in one selected package. [10] | Bosch suits existing Bosch 18V/AMPShare users choosing a smaller 140mm blade. The bare-tool package includes a blade, wrench, dust bag, VAC024 adapter and L-BOXX. Battery, charger and FSN guide rail are separate. [13] | C3606DPA suits a buyer who wants 36V MultiVolt battery operation and the option of the separately sold ET36A AC adapter. The kit supplies a 4.0Ah 36V battery, USB-equipped rapid charger, case, 6-1/2-inch blade and wrench. [16] | PTS01K suits buyers who want an 18V ONE+ kit with its tracks supplied. It includes a 4.0Ah battery, charger and two 27.5-inch track sections that join to 55 inches. The split rail arrangement is useful when packing shorter components. [19] | TS 60 is a distinct 168mm-blade saw for buyers wanting more documented square depth on Festool FS rails. The selected 576726 includes a fine-cut blade, window, splinter guard, hex key and Systainer. Rails are separate, with both FS and FSK systems supported. [22] | CT1274 suits buyers who want a 7-1/4-inch blade and a 2,000–6,000 RPM speed dial in a corded track saw. The 12A saw includes a 40-tooth blade and a swiveling dust adapter. WEN CT9502 100-inch or CT9110 110-inch tracks are separate. [25] | CT1065 suits buyers choosing WEN’s 10A corded, 6-1/2-inch saw with a separately purchased CT9502 track. That track comprises two 50-inch sections with joining adapters. The saw includes a 24-tooth blade and scoring, full-plunge and blade-change modes. [28] |
| Compatibility | Bevel travel is -1° to 48°, with 22.5° and 45° stops. Makita lists maximum depths of 2-3/16 inches square and 1-9/16 inches at 45°, but the page does not explicitly identify the rail basis. Confirm usable on-rail depth for a close-capacity cut. [2] | The manual distinguishes 55mm maximum square depth without a rail from 51mm with an FS rail. Bevel range is -1° to 47°. The page lists 43mm maximum at 45° without separately specifying an on-rail 45° value; verify that value if it decides the purchase. [5] | The manual gives -1° to 48° bevel travel and separate depth pointers for using or omitting a rail. Its capacity table does not clearly label the rail basis and pairs differing inch/metric values at 45°. Confirm usable depth for your rail and bevel rather than treating the headline as on-track capacity. [8] | The page explicitly gives on-track depths of 2-1/8 inches square and 1-5/8 inches at 45°. The manual gives 55mm on-rail square depth while the page states 54mm, so confirm a close-capacity cut. Bevel adjustment is 0° to 47°. [11] | The manual lists FSN 800, 1100, 1600 and 2100 rails at 31.5, 43.3, 63 and 82.7 inches. Bevel adjustment extends from -1° to 47°. Its depth table lists 52mm square and 32mm at 45° without explicitly labeling the rail basis; confirm your usable on-rail capacity. [14] | Matched optional rails include 31.5-inch 629010000 and 63-inch 379258M; the connector is separate. Bevel range is -1° to 46°. The page lists 2-3/5-inch square and 1-7/10-inch 45° capacities without identifying the rail basis. Verify on-rail depth for the chosen setup. [17] | The manual specifies on-track depths of 1-15/16 inches square and 1-7/16 inches at 45°, versus 2-1/8 and 1-9/16 inches without the track. Bevel range is -1° to 48°. Joined track length is not a guarantee of that much finished cutting travel. [20] | The manual gives 62mm maximum square depth without a rail and 57mm with an FS rail. Bevel range is -1° to 47°; the page gives 45mm maximum at 45° without separately establishing on-rail 45° capacity. Confirm that capacity for a thick bevel cut. [23] | The manual specifies 2.44-inch square and 1.73-inch 45° depths with a track. Without the track, those figures are 2.64 and 1.85 inches. Bevel travel is 0° to 45°. Match the on-track figure to the material rather than using the larger free-base headline. [26] | The manual gives on-track depths of 2.13 inches square and 1.50 inches at 45°, versus 2.32 and 1.65 inches without the track. Bevel travel is 0° to 45°. These are the manual’s capacities, not a measured cut-quality result. [29] |
| Form factor | A locking lever holds the blade-changing position, with an onboard hex wrench. A rear vacuum port provides an extraction connection; verify the hose fit because the page gives differing port diameters. The cord and separate rail need room during transport. [3] | FastFix provides a spindle stop for blade changes, and the dust connection is listed at 27/36mm. Choose the exact FS rail length and extraction hose before buying. The dual scale helps distinguish rail and free-base settings, while the case stores the saw separately from its long rail. [6] | A blade-change lever locks the saw at the access window; blade removal uses a spindle lock and wrench. The rear dust port rotates to accommodate a vacuum hose or bag. Buy a matched Milwaukee rail of suitable length separately and account for the battery, hose and rail in transport. [9] | Blade changes use a spindle lock and lever, with a hex wrench stored in the front handle; the outer cover need not be removed. A dust port supports extraction. Use the specified FLEXVOLT power system rather than assuming an ordinary 20V MAX pack works, and match hose fit before purchase. [12] | Front and rear adjustments set rail fit. VAC024 is specified for 1-1/4 or 1-1/2-inch vacuum hoses; VAC002 explicitly does not fit. Choose the exact adapter combination rather than assuming a hose match. The smaller blade uses a 20mm bore, with blade removal addressed by the manual’s spindle-lock and wrench procedure. [15] | A micro-adjust depth dial, blade window and 360° swiveling dust port provide useful setup controls. The dust bag is optional. Confirm hose fit and the exact blade-change procedure; an included wrench alone does not establish tool-free changes. Carry the rail separately from the supplied saw case. [18] | Rail-fit and anti-tip adjustments accompany dust connections for 1-1/4 or 1-7/8-inch hoses. Blade changing uses a dedicated plunge-depth lever position, spindle lock and supplied wrench. Confirm the joined-track alignment and extractor setup rather than expecting a dust-capture or finished-edge guarantee. [21] | FastFix provides a spindle lock for blade changes, and the extraction connection is 27/36mm. Its 120V corded setup needs an outlet and hose routing. Choose rail length for panels or the exact compatible FSK arrangement for crosscuts; neither rail type is included in this selection. [24] | The blade has a 5/8-inch arbor, and the mode selector has a blade-change setting. The dust port rotates 360°. Choose the matched rail, connectors and hose as part of the purchase; the saw package does not supply the long-track setup. [27] | A rear dust port connects to extraction equipment. Replacement-blade fit needs confirmation: the product page and manual specification table list a 20mm arbor, while a manual safety paragraph says 22mm. Resolve that conflict with WEN before buying replacement blades. Rails, clamps and the hose are separate. [30] |
Buy the rail setup, not just the saw
Makita supplies a 55-inch rail, DEWALT a 59-inch rail, and RYOBI two 27.5-inch sections. The selected Milwaukee, Bosch, Metabo HPT, Festool and WEN packages need rails separately. Bosch documents specific FSN lengths; Metabo HPT identifies exact optional rails. Use the matched system and check required travel, connectors and transport length before buying. [1] [10] [19] [7] [14] [17] [4] [22] [28] [25]
Power choice changes what travels with the saw. Makita, both Festools and both WENs are corded. Milwaukee, DEWALT, Metabo HPT and RYOBI are the selected battery kits; Bosch is a bare tool. Metabo HPT also supports an optional ET36A AC adapter. Include the battery, charger, hose and long rail when planning the complete setup. [1] [4] [24] [28] [25] [7] [10] [16] [19] [13]
Compare usable depth and accessory fit
The rail reduces usable depth. Festool’s manuals give square depths on FS rails of 51mm for TS 55 and 57mm for TS 60. RYOBI and both WEN manuals also separate on-track and free-base capacities at square and 45° cuts. Use the angle-specific on-rail figure; do not assume a page’s unlabelled maximum includes the rail. [5] [23] [20] [29] [26]
Official-document uncertainties matter near the limit. Makita, Bosch and Metabo HPT’s retained tables do not clearly identify the rail basis. Milwaukee’s table leaves the basis unclear and differs in its inch/metric 45° pair; DEWALT’s page and manual differ by 1mm at on-rail square depth. Confirm those values for the exact setup. WEN CT1065 also has conflicting arbor entries that need resolving before a replacement-blade purchase. [2] [14] [17] [8] [11] [30]
Blade-change locks and dust ports are practical provisions, not performance guarantees. Festool lists FastFix and a 27/36mm connection, Bosch excludes VAC002 while listing VAC024, and RYOBI specifies hose sizes. Makita’s port diameter differs within its page. Match the blade and hose to the exact model; a connected extractor does not establish a measured capture rate. [6] [24] [15] [21] [3]
How we compared.
Source-based comparison of US manufacturer pages and manuals read October 3, 2026. Richard Kent’s Pro Trade Craft review of the Makita SP6000J describes adjusting rail play and initially trimming the rail’s chip guard; that attributed setup experience informed our emphasis on the complete rail system. It is one review, not owner consensus. Makita leads for its included rail and case; other picks emphasize power-platform fit, documented on-rail depths or blade-changing provisions. We have not tested cut accuracy, finish, speed, runtime, dust capture or safety outcomes. Capacities are maker statements. Ranking is independent of commission.
How we chooseSources
Official product documentation, reviewed October 3, 2026.
Makita · US · Read October 4, 2026
Festool USA · US · Read October 4, 2026
Festool · US · Read October 4, 2026
Milwaukee Tool · US · Read October 4, 2026
Milwaukee Tool · US · Read October 4, 2026
DEWALT · US · Read October 4, 2026
DEWALT · US · Read October 4, 2026
Bosch · US · Read October 4, 2026
Bosch · US · Read October 4, 2026
Metabo HPT · US · Read October 4, 2026
RYOBI · US · Read October 4, 2026
RYOBI / TTI Consumer Power Tools · US · Read October 4, 2026
Festool USA · US · Read October 4, 2026
Festool · US · Read October 4, 2026
WEN Products · US · Read October 4, 2026
WEN Products · US · Read October 4, 2026
WEN Products · US · Read October 4, 2026
WEN Products · US · Read October 4, 2026
Pro Trade Craft; Richard Kent · US · Read October 4, 2026
Detailed source notes
- Makita SP6000J1: Makita leads for a practical starting package: the SP6000J1 includes the SP6000J 12A saw, a 55-inch Makita rail and a MAKPAC case. The included 6-1/2-inch, 48-tooth blade suits a buyer assembling the saw and guidance together.
Exact US model and stated package. Square is 0° bevel, blade perpendicular to base. On-rail and free-base depths differ; no unlabelled capacity is presumed on-rail. Follow exact saw, blade, rail and material instructions. No universal rail or cross-brand battery compatibility, measured cutting accuracy, splinter-free finish, runtime, dust capture or safety outcome is asserted.
SP6000J1 plunge saw with 55-inch guide rail · Actual direct fetched HTML /private/tmp/tb229-makita-readable.txt Product details Specs Includes
Makita leads for a practical starting package: the SP6000J1 includes the SP6000J 12A saw, a 55-inch Makita rail and a MAKPAC case. The included 6-1/2-inch, 48-tooth blade suits a buyer assembling the saw and guidance together.Checked October 3, 2026
- Makita SP6000J1: Bevel travel is -1° to 48°, with 22.5° and 45° stops. Makita lists maximum depths of 2-3/16 inches square and 1-9/16 inches at 45°, but the page does not explicitly identify the rail basis. Confirm usable on-rail depth for a close-capacity cut.
Exact US model and stated package. Square is 0° bevel, blade perpendicular to base. On-rail and free-base depths differ; no unlabelled capacity is presumed on-rail. Follow exact saw, blade, rail and material instructions. No universal rail or cross-brand battery compatibility, measured cutting accuracy, splinter-free finish, runtime, dust capture or safety outcome is asserted.
SP6000J1 plunge saw with 55-inch guide rail · Actual direct fetched HTML /private/tmp/tb229-makita-readable.txt Product details Specs Includes
Bevel travel is -1° to 48°, with 22.5° and 45° stops. Makita lists maximum depths of 2-3/16 inches square and 1-9/16 inches at 45°, but the page does not explicitly identify the rail basis. Confirm usable on-rail depth for a close-capacity cut.Checked October 3, 2026
- Makita SP6000J1: A locking lever holds the blade-changing position, with an onboard hex wrench. A rear vacuum port provides an extraction connection; verify the hose fit because the page gives differing port diameters. The cord and separate rail need room during transport.
Exact US model and stated package. Square is 0° bevel, blade perpendicular to base. On-rail and free-base depths differ; no unlabelled capacity is presumed on-rail. Follow exact saw, blade, rail and material instructions. No universal rail or cross-brand battery compatibility, measured cutting accuracy, splinter-free finish, runtime, dust capture or safety outcome is asserted.
SP6000J1 plunge saw with 55-inch guide rail · Actual direct fetched HTML /private/tmp/tb229-makita-readable.txt Product details Specs Includes
A locking lever holds the blade-changing position, with an onboard hex wrench. A rear vacuum port provides an extraction connection; verify the hose fit because the page gives differing port diameters. The cord and separate rail need room during transport.Checked October 3, 2026
- Festool TS 55 FEQ-F-Plus: TS 55 suits buyers building a Festool FS rail system. The selected 576708 includes a 160mm fine-cut blade, sight window, splinter guard, hex key, power cord and Systainer. A guide rail is separate.
Exact US model and stated package. Square is 0° bevel, blade perpendicular to base. On-rail and free-base depths differ; no unlabelled capacity is presumed on-rail. Follow exact saw, blade, rail and material instructions. No universal rail or cross-brand battery compatibility, measured cutting accuracy, splinter-free finish, runtime, dust capture or safety outcome is asserted.
TS 55 FEQ-F-Plus 576708 scope of delivery and specs · turn1818view2/4 Contains lines537-568 Specs607-652 Highlights749-756
TS 55 suits buyers building a Festool FS rail system. The selected 576708 includes a 160mm fine-cut blade, sight window, splinter guard, hex key, power cord and Systainer. A guide rail is separate.TS 55 FEQ instruction manual · turn1822view1 PDFpage12 section8.2; turn1822view2 guide system
TS 55 suits buyers building a Festool FS rail system. The selected 576708 includes a 160mm fine-cut blade, sight window, splinter guard, hex key, power cord and Systainer. A guide rail is separate.Checked October 3, 2026
- Festool TS 55 FEQ-F-Plus: The manual distinguishes 55mm maximum square depth without a rail from 51mm with an FS rail. Bevel range is -1° to 47°. The page lists 43mm maximum at 45° without separately specifying an on-rail 45° value; verify that value if it decides the purchase.
Exact US model and stated package. Square is 0° bevel, blade perpendicular to base. On-rail and free-base depths differ; no unlabelled capacity is presumed on-rail. Follow exact saw, blade, rail and material instructions. No universal rail or cross-brand battery compatibility, measured cutting accuracy, splinter-free finish, runtime, dust capture or safety outcome is asserted.
TS 55 FEQ-F-Plus 576708 scope of delivery and specs · turn1818view2/4 Contains lines537-568 Specs607-652 Highlights749-756
The manual distinguishes 55mm maximum square depth without a rail from 51mm with an FS rail. Bevel range is -1° to 47°. The page lists 43mm maximum at 45° without separately specifying an on-rail 45° value; verify that value if it decides the purchase.TS 55 FEQ instruction manual · turn1822view1 PDFpage12 section8.2; turn1822view2 guide system
The manual distinguishes 55mm maximum square depth without a rail from 51mm with an FS rail. Bevel range is -1° to 47°. The page lists 43mm maximum at 45° without separately specifying an on-rail 45° value; verify that value if it decides the purchase.Checked October 3, 2026
- Festool TS 55 FEQ-F-Plus: FastFix provides a spindle stop for blade changes, and the dust connection is listed at 27/36mm. Choose the exact FS rail length and extraction hose before buying. The dual scale helps distinguish rail and free-base settings, while the case stores the saw separately from its long rail.
Exact US model and stated package. Square is 0° bevel, blade perpendicular to base. On-rail and free-base depths differ; no unlabelled capacity is presumed on-rail. Follow exact saw, blade, rail and material instructions. No universal rail or cross-brand battery compatibility, measured cutting accuracy, splinter-free finish, runtime, dust capture or safety outcome is asserted.
TS 55 FEQ-F-Plus 576708 scope of delivery and specs · turn1818view2/4 Contains lines537-568 Specs607-652 Highlights749-756
FastFix provides a spindle stop for blade changes, and the dust connection is listed at 27/36mm. Choose the exact FS rail length and extraction hose before buying. The dual scale helps distinguish rail and free-base settings, while the case stores the saw separately from its long rail.TS 55 FEQ instruction manual · turn1822view1 PDFpage12 section8.2; turn1822view2 guide system
FastFix provides a spindle stop for blade changes, and the dust connection is listed at 27/36mm. Choose the exact FS rail length and extraction hose before buying. The dual scale helps distinguish rail and free-base settings, while the case stores the saw separately from its long rail.Checked October 3, 2026
- Milwaukee M18 FUEL 2831-21: 2831-21 suits a buyer choosing an M18 power setup and PACKOUT storage. Its kit includes the 6-1/2-inch saw, HIGH OUTPUT XC6.0 battery, rapid charger and PACKOUT XL box. A guide rail is not listed among those kit contents.
Exact US model and stated package. Square is 0° bevel, blade perpendicular to base. On-rail and free-base depths differ; no unlabelled capacity is presumed on-rail. Follow exact saw, blade, rail and material instructions. No universal rail or cross-brand battery compatibility, measured cutting accuracy, splinter-free finish, runtime, dust capture or safety outcome is asserted.
M18 FUEL 2831-21 plunge track saw kit · Actual maker page turn1814view0 kit Includes and Features
2831-21 suits a buyer choosing an M18 power setup and PACKOUT storage. Its kit includes the 6-1/2-inch saw, HIGH OUTPUT XC6.0 battery, rapid charger and PACKOUT XL box. A guide rail is not listed among those kit contents.2831-20 operator manual · Actual direct fetched PDF /private/tmp/tb229-milwaukee-manual-readable.txt Specs lines373-386 Depth575-595 Bladechange503-528 Dust763-772
2831-21 suits a buyer choosing an M18 power setup and PACKOUT storage. Its kit includes the 6-1/2-inch saw, HIGH OUTPUT XC6.0 battery, rapid charger and PACKOUT XL box. A guide rail is not listed among those kit contents.Checked October 3, 2026
- Milwaukee M18 FUEL 2831-21: The manual gives -1° to 48° bevel travel and separate depth pointers for using or omitting a rail. Its capacity table does not clearly label the rail basis and pairs differing inch/metric values at 45°. Confirm usable depth for your rail and bevel rather than treating the headline as on-track capacity.
Exact US model and stated package. Square is 0° bevel, blade perpendicular to base. On-rail and free-base depths differ; no unlabelled capacity is presumed on-rail. Follow exact saw, blade, rail and material instructions. No universal rail or cross-brand battery compatibility, measured cutting accuracy, splinter-free finish, runtime, dust capture or safety outcome is asserted.
M18 FUEL 2831-21 plunge track saw kit · Actual maker page turn1814view0 kit Includes and Features
The manual gives -1° to 48° bevel travel and separate depth pointers for using or omitting a rail. Its capacity table does not clearly label the rail basis and pairs differing inch/metric values at 45°. Confirm usable depth for your rail and bevel rather than treating the headline as on-track capacity.2831-20 operator manual · Actual direct fetched PDF /private/tmp/tb229-milwaukee-manual-readable.txt Specs lines373-386 Depth575-595 Bladechange503-528 Dust763-772
The manual gives -1° to 48° bevel travel and separate depth pointers for using or omitting a rail. Its capacity table does not clearly label the rail basis and pairs differing inch/metric values at 45°. Confirm usable depth for your rail and bevel rather than treating the headline as on-track capacity.Checked October 3, 2026
- Milwaukee M18 FUEL 2831-21: A blade-change lever locks the saw at the access window; blade removal uses a spindle lock and wrench. The rear dust port rotates to accommodate a vacuum hose or bag. Buy a matched Milwaukee rail of suitable length separately and account for the battery, hose and rail in transport.
Exact US model and stated package. Square is 0° bevel, blade perpendicular to base. On-rail and free-base depths differ; no unlabelled capacity is presumed on-rail. Follow exact saw, blade, rail and material instructions. No universal rail or cross-brand battery compatibility, measured cutting accuracy, splinter-free finish, runtime, dust capture or safety outcome is asserted.
M18 FUEL 2831-21 plunge track saw kit · Actual maker page turn1814view0 kit Includes and Features
A blade-change lever locks the saw at the access window; blade removal uses a spindle lock and wrench. The rear dust port rotates to accommodate a vacuum hose or bag. Buy a matched Milwaukee rail of suitable length separately and account for the battery, hose and rail in transport.2831-20 operator manual · Actual direct fetched PDF /private/tmp/tb229-milwaukee-manual-readable.txt Specs lines373-386 Depth575-595 Bladechange503-528 Dust763-772
A blade-change lever locks the saw at the access window; blade removal uses a spindle lock and wrench. The rear dust port rotates to accommodate a vacuum hose or bag. Buy a matched Milwaukee rail of suitable length separately and account for the battery, hose and rail in transport.Checked October 3, 2026
- DEWALT DCS520ST1: DCS520ST1 supplies the DCS520 saw, FLEXVOLT battery, DCB118 charger, TSTAK box, 6-1/2-inch 42-tooth blade and DWS5022 59-inch rail. It suits buyers who want cordless power and the matching rail in one selected package.
Exact US model and stated package. Square is 0° bevel, blade perpendicular to base. On-rail and free-base depths differ; no unlabelled capacity is presumed on-rail. Follow exact saw, blade, rail and material instructions. No universal rail or cross-brand battery compatibility, measured cutting accuracy, splinter-free finish, runtime, dust capture or safety outcome is asserted.
DCS520ST1 FLEXVOLT kit with 59-inch rail · Actual direct fetched HTML /private/tmp/tb229-dewalt-readable.txt Includes On Track Cut Depth
DCS520ST1 supplies the DCS520 saw, FLEXVOLT battery, DCB118 charger, TSTAK box, 6-1/2-inch 42-tooth blade and DWS5022 59-inch rail. It suits buyers who want cordless power and the matching rail in one selected package.DCS520 instruction manual · Actual direct fetched PDF /private/tmp/tb229-dewalt-manual-readable.txt Bevel915-920 Bladechange921-933 Depth981-984 Dust/GuideRailSystem
DCS520ST1 supplies the DCS520 saw, FLEXVOLT battery, DCB118 charger, TSTAK box, 6-1/2-inch 42-tooth blade and DWS5022 59-inch rail. It suits buyers who want cordless power and the matching rail in one selected package.Checked October 3, 2026
- DEWALT DCS520ST1: The page explicitly gives on-track depths of 2-1/8 inches square and 1-5/8 inches at 45°. The manual gives 55mm on-rail square depth while the page states 54mm, so confirm a close-capacity cut. Bevel adjustment is 0° to 47°.
Exact US model and stated package. Square is 0° bevel, blade perpendicular to base. On-rail and free-base depths differ; no unlabelled capacity is presumed on-rail. Follow exact saw, blade, rail and material instructions. No universal rail or cross-brand battery compatibility, measured cutting accuracy, splinter-free finish, runtime, dust capture or safety outcome is asserted.
DCS520ST1 FLEXVOLT kit with 59-inch rail · Actual direct fetched HTML /private/tmp/tb229-dewalt-readable.txt Includes On Track Cut Depth
The page explicitly gives on-track depths of 2-1/8 inches square and 1-5/8 inches at 45°. The manual gives 55mm on-rail square depth while the page states 54mm, so confirm a close-capacity cut. Bevel adjustment is 0° to 47°.DCS520 instruction manual · Actual direct fetched PDF /private/tmp/tb229-dewalt-manual-readable.txt Bevel915-920 Bladechange921-933 Depth981-984 Dust/GuideRailSystem
The page explicitly gives on-track depths of 2-1/8 inches square and 1-5/8 inches at 45°. The manual gives 55mm on-rail square depth while the page states 54mm, so confirm a close-capacity cut. Bevel adjustment is 0° to 47°.Checked October 3, 2026
- DEWALT DCS520ST1: Blade changes use a spindle lock and lever, with a hex wrench stored in the front handle; the outer cover need not be removed. A dust port supports extraction. Use the specified FLEXVOLT power system rather than assuming an ordinary 20V MAX pack works, and match hose fit before purchase.
Exact US model and stated package. Square is 0° bevel, blade perpendicular to base. On-rail and free-base depths differ; no unlabelled capacity is presumed on-rail. Follow exact saw, blade, rail and material instructions. No universal rail or cross-brand battery compatibility, measured cutting accuracy, splinter-free finish, runtime, dust capture or safety outcome is asserted.
DCS520ST1 FLEXVOLT kit with 59-inch rail · Actual direct fetched HTML /private/tmp/tb229-dewalt-readable.txt Includes On Track Cut Depth
Blade changes use a spindle lock and lever, with a hex wrench stored in the front handle; the outer cover need not be removed. A dust port supports extraction. Use the specified FLEXVOLT power system rather than assuming an ordinary 20V MAX pack works, and match hose fit before purchase.DCS520 instruction manual · Actual direct fetched PDF /private/tmp/tb229-dewalt-manual-readable.txt Bevel915-920 Bladechange921-933 Depth981-984 Dust/GuideRailSystem
Blade changes use a spindle lock and lever, with a hex wrench stored in the front handle; the outer cover need not be removed. A dust port supports extraction. Use the specified FLEXVOLT power system rather than assuming an ordinary 20V MAX pack works, and match hose fit before purchase.Checked October 3, 2026
- Bosch GKT18V-20GCL: Bosch suits existing Bosch 18V/AMPShare users choosing a smaller 140mm blade. The bare-tool package includes a blade, wrench, dust bag, VAC024 adapter and L-BOXX. Battery, charger and FSN guide rail are separate.
Exact US model and stated package. Square is 0° bevel, blade perpendicular to base. On-rail and free-base depths differ; no unlabelled capacity is presumed on-rail. Follow exact saw, blade, rail and material instructions. No universal rail or cross-brand battery compatibility, measured cutting accuracy, splinter-free finish, runtime, dust capture or safety outcome is asserted.
GKT18V-20GCL PROFACTOR bare saw · Actual maker body turn1813view0 and turn1814view5/1815view6
Bosch suits existing Bosch 18V/AMPShare users choosing a smaller 140mm blade. The bare-tool package includes a blade, wrench, dust bag, VAC024 adapter and L-BOXX. Battery, charger and FSN guide rail are separate.GKT18V-20GC operating instructions · Actual direct fetched PDF /private/tmp/tb229-bosch-manual-readable.txt Specs578-590 Track896-899 Depth/bevel1109-1142
Bosch suits existing Bosch 18V/AMPShare users choosing a smaller 140mm blade. The bare-tool package includes a blade, wrench, dust bag, VAC024 adapter and L-BOXX. Battery, charger and FSN guide rail are separate.Checked October 3, 2026
- Bosch GKT18V-20GCL: The manual lists FSN 800, 1100, 1600 and 2100 rails at 31.5, 43.3, 63 and 82.7 inches. Bevel adjustment extends from -1° to 47°. Its depth table lists 52mm square and 32mm at 45° without explicitly labeling the rail basis; confirm your usable on-rail capacity.
Exact US model and stated package. Square is 0° bevel, blade perpendicular to base. On-rail and free-base depths differ; no unlabelled capacity is presumed on-rail. Follow exact saw, blade, rail and material instructions. No universal rail or cross-brand battery compatibility, measured cutting accuracy, splinter-free finish, runtime, dust capture or safety outcome is asserted.
GKT18V-20GCL PROFACTOR bare saw · Actual maker body turn1813view0 and turn1814view5/1815view6
The manual lists FSN 800, 1100, 1600 and 2100 rails at 31.5, 43.3, 63 and 82.7 inches. Bevel adjustment extends from -1° to 47°. Its depth table lists 52mm square and 32mm at 45° without explicitly labeling the rail basis; confirm your usable on-rail capacity.GKT18V-20GC operating instructions · Actual direct fetched PDF /private/tmp/tb229-bosch-manual-readable.txt Specs578-590 Track896-899 Depth/bevel1109-1142
The manual lists FSN 800, 1100, 1600 and 2100 rails at 31.5, 43.3, 63 and 82.7 inches. Bevel adjustment extends from -1° to 47°. Its depth table lists 52mm square and 32mm at 45° without explicitly labeling the rail basis; confirm your usable on-rail capacity.Checked October 3, 2026
- Bosch GKT18V-20GCL: Front and rear adjustments set rail fit. VAC024 is specified for 1-1/4 or 1-1/2-inch vacuum hoses; VAC002 explicitly does not fit. Choose the exact adapter combination rather than assuming a hose match. The smaller blade uses a 20mm bore, with blade removal addressed by the manual’s spindle-lock and wrench procedure.
Exact US model and stated package. Square is 0° bevel, blade perpendicular to base. On-rail and free-base depths differ; no unlabelled capacity is presumed on-rail. Follow exact saw, blade, rail and material instructions. No universal rail or cross-brand battery compatibility, measured cutting accuracy, splinter-free finish, runtime, dust capture or safety outcome is asserted.
GKT18V-20GCL PROFACTOR bare saw · Actual maker body turn1813view0 and turn1814view5/1815view6
Front and rear adjustments set rail fit. VAC024 is specified for 1-1/4 or 1-1/2-inch vacuum hoses; VAC002 explicitly does not fit. Choose the exact adapter combination rather than assuming a hose match. The smaller blade uses a 20mm bore, with blade removal addressed by the manual’s spindle-lock and wrench procedure.GKT18V-20GC operating instructions · Actual direct fetched PDF /private/tmp/tb229-bosch-manual-readable.txt Specs578-590 Track896-899 Depth/bevel1109-1142
Front and rear adjustments set rail fit. VAC024 is specified for 1-1/4 or 1-1/2-inch vacuum hoses; VAC002 explicitly does not fit. Choose the exact adapter combination rather than assuming a hose match. The smaller blade uses a 20mm bore, with blade removal addressed by the manual’s spindle-lock and wrench procedure.Checked October 3, 2026
- Metabo HPT C3606DPA: C3606DPA suits a buyer who wants 36V MultiVolt battery operation and the option of the separately sold ET36A AC adapter. The kit supplies a 4.0Ah 36V battery, USB-equipped rapid charger, case, 6-1/2-inch blade and wrench.
Exact US model and stated package. Square is 0° bevel, blade perpendicular to base. On-rail and free-base depths differ; no unlabelled capacity is presumed on-rail. Follow exact saw, blade, rail and material instructions. No universal rail or cross-brand battery compatibility, measured cutting accuracy, splinter-free finish, runtime, dust capture or safety outcome is asserted.
C3606DPA MultiVolt track saw kit · Actual full maker body turn1815view1 lines128-290
C3606DPA suits a buyer who wants 36V MultiVolt battery operation and the option of the separately sold ET36A AC adapter. The kit supplies a 4.0Ah 36V battery, USB-equipped rapid charger, case, 6-1/2-inch blade and wrench.Checked October 3, 2026
- Metabo HPT C3606DPA: Matched optional rails include 31.5-inch 629010000 and 63-inch 379258M; the connector is separate. Bevel range is -1° to 46°. The page lists 2-3/5-inch square and 1-7/10-inch 45° capacities without identifying the rail basis. Verify on-rail depth for the chosen setup.
Exact US model and stated package. Square is 0° bevel, blade perpendicular to base. On-rail and free-base depths differ; no unlabelled capacity is presumed on-rail. Follow exact saw, blade, rail and material instructions. No universal rail or cross-brand battery compatibility, measured cutting accuracy, splinter-free finish, runtime, dust capture or safety outcome is asserted.
C3606DPA MultiVolt track saw kit · Actual full maker body turn1815view1 lines128-290
Matched optional rails include 31.5-inch 629010000 and 63-inch 379258M; the connector is separate. Bevel range is -1° to 46°. The page lists 2-3/5-inch square and 1-7/10-inch 45° capacities without identifying the rail basis. Verify on-rail depth for the chosen setup.Checked October 3, 2026
- Metabo HPT C3606DPA: A micro-adjust depth dial, blade window and 360° swiveling dust port provide useful setup controls. The dust bag is optional. Confirm hose fit and the exact blade-change procedure; an included wrench alone does not establish tool-free changes. Carry the rail separately from the supplied saw case.
Exact US model and stated package. Square is 0° bevel, blade perpendicular to base. On-rail and free-base depths differ; no unlabelled capacity is presumed on-rail. Follow exact saw, blade, rail and material instructions. No universal rail or cross-brand battery compatibility, measured cutting accuracy, splinter-free finish, runtime, dust capture or safety outcome is asserted.
C3606DPA MultiVolt track saw kit · Actual full maker body turn1815view1 lines128-290
A micro-adjust depth dial, blade window and 360° swiveling dust port provide useful setup controls. The dust bag is optional. Confirm hose fit and the exact blade-change procedure; an included wrench alone does not establish tool-free changes. Carry the rail separately from the supplied saw case.Checked October 3, 2026
- RYOBI PTS01K: PTS01K suits buyers who want an 18V ONE+ kit with its tracks supplied. It includes a 4.0Ah battery, charger and two 27.5-inch track sections that join to 55 inches. The split rail arrangement is useful when packing shorter components.
Exact US model and stated package. Square is 0° bevel, blade perpendicular to base. On-rail and free-base depths differ; no unlabelled capacity is presumed on-rail. Follow exact saw, blade, rail and material instructions. No universal rail or cross-brand battery compatibility, measured cutting accuracy, splinter-free finish, runtime, dust capture or safety outcome is asserted.
PTS01K ONE+ HP track saw kit · Actual maker body turn1816view0 ProductDetails
PTS01K suits buyers who want an 18V ONE+ kit with its tracks supplied. It includes a 4.0Ah battery, charger and two 27.5-inch track sections that join to 55 inches. The split rail arrangement is useful when packing shorter components.PTS01 track saw operator manual · Actual direct fetched PDF /private/tmp/tb229-ryobi-manual-readable.txt Specs452-464 BladeChange443-449/498-548
PTS01K suits buyers who want an 18V ONE+ kit with its tracks supplied. It includes a 4.0Ah battery, charger and two 27.5-inch track sections that join to 55 inches. The split rail arrangement is useful when packing shorter components.Checked October 3, 2026
- RYOBI PTS01K: The manual specifies on-track depths of 1-15/16 inches square and 1-7/16 inches at 45°, versus 2-1/8 and 1-9/16 inches without the track. Bevel range is -1° to 48°. Joined track length is not a guarantee of that much finished cutting travel.
Exact US model and stated package. Square is 0° bevel, blade perpendicular to base. On-rail and free-base depths differ; no unlabelled capacity is presumed on-rail. Follow exact saw, blade, rail and material instructions. No universal rail or cross-brand battery compatibility, measured cutting accuracy, splinter-free finish, runtime, dust capture or safety outcome is asserted.
PTS01K ONE+ HP track saw kit · Actual maker body turn1816view0 ProductDetails
The manual specifies on-track depths of 1-15/16 inches square and 1-7/16 inches at 45°, versus 2-1/8 and 1-9/16 inches without the track. Bevel range is -1° to 48°. Joined track length is not a guarantee of that much finished cutting travel.PTS01 track saw operator manual · Actual direct fetched PDF /private/tmp/tb229-ryobi-manual-readable.txt Specs452-464 BladeChange443-449/498-548
The manual specifies on-track depths of 1-15/16 inches square and 1-7/16 inches at 45°, versus 2-1/8 and 1-9/16 inches without the track. Bevel range is -1° to 48°. Joined track length is not a guarantee of that much finished cutting travel.Checked October 3, 2026
- RYOBI PTS01K: Rail-fit and anti-tip adjustments accompany dust connections for 1-1/4 or 1-7/8-inch hoses. Blade changing uses a dedicated plunge-depth lever position, spindle lock and supplied wrench. Confirm the joined-track alignment and extractor setup rather than expecting a dust-capture or finished-edge guarantee.
Exact US model and stated package. Square is 0° bevel, blade perpendicular to base. On-rail and free-base depths differ; no unlabelled capacity is presumed on-rail. Follow exact saw, blade, rail and material instructions. No universal rail or cross-brand battery compatibility, measured cutting accuracy, splinter-free finish, runtime, dust capture or safety outcome is asserted.
PTS01K ONE+ HP track saw kit · Actual maker body turn1816view0 ProductDetails
Rail-fit and anti-tip adjustments accompany dust connections for 1-1/4 or 1-7/8-inch hoses. Blade changing uses a dedicated plunge-depth lever position, spindle lock and supplied wrench. Confirm the joined-track alignment and extractor setup rather than expecting a dust-capture or finished-edge guarantee.PTS01 track saw operator manual · Actual direct fetched PDF /private/tmp/tb229-ryobi-manual-readable.txt Specs452-464 BladeChange443-449/498-548
Rail-fit and anti-tip adjustments accompany dust connections for 1-1/4 or 1-7/8-inch hoses. Blade changing uses a dedicated plunge-depth lever position, spindle lock and supplied wrench. Confirm the joined-track alignment and extractor setup rather than expecting a dust-capture or finished-edge guarantee.Checked October 3, 2026
- Festool TS 60 KEB-F-Plus: TS 60 is a distinct 168mm-blade saw for buyers wanting more documented square depth on Festool FS rails. The selected 576726 includes a fine-cut blade, window, splinter guard, hex key and Systainer. Rails are separate, with both FS and FSK systems supported.
Exact US model and stated package. Square is 0° bevel, blade perpendicular to base. On-rail and free-base depths differ; no unlabelled capacity is presumed on-rail. Follow exact saw, blade, rail and material instructions. No universal rail or cross-brand battery compatibility, measured cutting accuracy, splinter-free finish, runtime, dust capture or safety outcome is asserted.
TS 60 KEB-F-Plus 576726 track saw · turn1821view0 Contains537-562 and turn1821view1 Specs610-653
TS 60 is a distinct 168mm-blade saw for buyers wanting more documented square depth on Festool FS rails. The selected 576726 includes a fine-cut blade, window, splinter guard, hex key and Systainer. Rails are separate, with both FS and FSK systems supported.TS 60 K operating instructions · turn1823view0 PDFpage9 section8.2 and FS/FSK section11
TS 60 is a distinct 168mm-blade saw for buyers wanting more documented square depth on Festool FS rails. The selected 576726 includes a fine-cut blade, window, splinter guard, hex key and Systainer. Rails are separate, with both FS and FSK systems supported.Checked October 3, 2026
- Festool TS 60 KEB-F-Plus: The manual gives 62mm maximum square depth without a rail and 57mm with an FS rail. Bevel range is -1° to 47°; the page gives 45mm maximum at 45° without separately establishing on-rail 45° capacity. Confirm that capacity for a thick bevel cut.
Exact US model and stated package. Square is 0° bevel, blade perpendicular to base. On-rail and free-base depths differ; no unlabelled capacity is presumed on-rail. Follow exact saw, blade, rail and material instructions. No universal rail or cross-brand battery compatibility, measured cutting accuracy, splinter-free finish, runtime, dust capture or safety outcome is asserted.
TS 60 KEB-F-Plus 576726 track saw · turn1821view0 Contains537-562 and turn1821view1 Specs610-653
The manual gives 62mm maximum square depth without a rail and 57mm with an FS rail. Bevel range is -1° to 47°; the page gives 45mm maximum at 45° without separately establishing on-rail 45° capacity. Confirm that capacity for a thick bevel cut.TS 60 K operating instructions · turn1823view0 PDFpage9 section8.2 and FS/FSK section11
The manual gives 62mm maximum square depth without a rail and 57mm with an FS rail. Bevel range is -1° to 47°; the page gives 45mm maximum at 45° without separately establishing on-rail 45° capacity. Confirm that capacity for a thick bevel cut.Checked October 3, 2026
- Festool TS 60 KEB-F-Plus: FastFix provides a spindle lock for blade changes, and the extraction connection is 27/36mm. Its 120V corded setup needs an outlet and hose routing. Choose rail length for panels or the exact compatible FSK arrangement for crosscuts; neither rail type is included in this selection.
Exact US model and stated package. Square is 0° bevel, blade perpendicular to base. On-rail and free-base depths differ; no unlabelled capacity is presumed on-rail. Follow exact saw, blade, rail and material instructions. No universal rail or cross-brand battery compatibility, measured cutting accuracy, splinter-free finish, runtime, dust capture or safety outcome is asserted.
TS 60 KEB-F-Plus 576726 track saw · turn1821view0 Contains537-562 and turn1821view1 Specs610-653
FastFix provides a spindle lock for blade changes, and the extraction connection is 27/36mm. Its 120V corded setup needs an outlet and hose routing. Choose rail length for panels or the exact compatible FSK arrangement for crosscuts; neither rail type is included in this selection.TS 60 K operating instructions · turn1823view0 PDFpage9 section8.2 and FS/FSK section11
FastFix provides a spindle lock for blade changes, and the extraction connection is 27/36mm. Its 120V corded setup needs an outlet and hose routing. Choose rail length for panels or the exact compatible FSK arrangement for crosscuts; neither rail type is included in this selection.Checked October 3, 2026
- WEN CT1274: CT1274 suits buyers who want a 7-1/4-inch blade and a 2,000–6,000 RPM speed dial in a corded track saw. The 12A saw includes a 40-tooth blade and a swiveling dust adapter. WEN CT9502 100-inch or CT9110 110-inch tracks are separate.
Exact US model and stated package. Square is 0° bevel, blade perpendicular to base. On-rail and free-base depths differ; no unlabelled capacity is presumed on-rail. Follow exact saw, blade, rail and material instructions. No universal rail or cross-brand battery compatibility, measured cutting accuracy, splinter-free finish, runtime, dust capture or safety outcome is asserted.
CT1274 12-amp variable-speed track saw · turn1817view0 body156-164
CT1274 suits buyers who want a 7-1/4-inch blade and a 2,000–6,000 RPM speed dial in a corded track saw. The 12A saw includes a 40-tooth blade and a swiveling dust adapter. WEN CT9502 100-inch or CT9110 110-inch tracks are separate.CT1274 instruction manual · turn1823view1 PDFpage3 Specs59-63 and turn1823view2 bladechange674-677
CT1274 suits buyers who want a 7-1/4-inch blade and a 2,000–6,000 RPM speed dial in a corded track saw. The 12A saw includes a 40-tooth blade and a swiveling dust adapter. WEN CT9502 100-inch or CT9110 110-inch tracks are separate.Checked October 3, 2026
- WEN CT1274: The manual specifies 2.44-inch square and 1.73-inch 45° depths with a track. Without the track, those figures are 2.64 and 1.85 inches. Bevel travel is 0° to 45°. Match the on-track figure to the material rather than using the larger free-base headline.
Exact US model and stated package. Square is 0° bevel, blade perpendicular to base. On-rail and free-base depths differ; no unlabelled capacity is presumed on-rail. Follow exact saw, blade, rail and material instructions. No universal rail or cross-brand battery compatibility, measured cutting accuracy, splinter-free finish, runtime, dust capture or safety outcome is asserted.
CT1274 12-amp variable-speed track saw · turn1817view0 body156-164
The manual specifies 2.44-inch square and 1.73-inch 45° depths with a track. Without the track, those figures are 2.64 and 1.85 inches. Bevel travel is 0° to 45°. Match the on-track figure to the material rather than using the larger free-base headline.CT1274 instruction manual · turn1823view1 PDFpage3 Specs59-63 and turn1823view2 bladechange674-677
The manual specifies 2.44-inch square and 1.73-inch 45° depths with a track. Without the track, those figures are 2.64 and 1.85 inches. Bevel travel is 0° to 45°. Match the on-track figure to the material rather than using the larger free-base headline.Checked October 3, 2026
- WEN CT1274: The blade has a 5/8-inch arbor, and the mode selector has a blade-change setting. The dust port rotates 360°. Choose the matched rail, connectors and hose as part of the purchase; the saw package does not supply the long-track setup.
Exact US model and stated package. Square is 0° bevel, blade perpendicular to base. On-rail and free-base depths differ; no unlabelled capacity is presumed on-rail. Follow exact saw, blade, rail and material instructions. No universal rail or cross-brand battery compatibility, measured cutting accuracy, splinter-free finish, runtime, dust capture or safety outcome is asserted.
CT1274 12-amp variable-speed track saw · turn1817view0 body156-164
The blade has a 5/8-inch arbor, and the mode selector has a blade-change setting. The dust port rotates 360°. Choose the matched rail, connectors and hose as part of the purchase; the saw package does not supply the long-track setup.CT1274 instruction manual · turn1823view1 PDFpage3 Specs59-63 and turn1823view2 bladechange674-677
The blade has a 5/8-inch arbor, and the mode selector has a blade-change setting. The dust port rotates 360°. Choose the matched rail, connectors and hose as part of the purchase; the saw package does not supply the long-track setup.Checked October 3, 2026
- WEN CT1065: CT1065 suits buyers choosing WEN’s 10A corded, 6-1/2-inch saw with a separately purchased CT9502 track. That track comprises two 50-inch sections with joining adapters. The saw includes a 24-tooth blade and scoring, full-plunge and blade-change modes.
Exact US model and stated package. Square is 0° bevel, blade perpendicular to base. On-rail and free-base depths differ; no unlabelled capacity is presumed on-rail. Follow exact saw, blade, rail and material instructions. No universal rail or cross-brand battery compatibility, measured cutting accuracy, splinter-free finish, runtime, dust capture or safety outcome is asserted.
CT1065 10-amp plunge track saw · turn1824view0 ProductDescription165-173 and CT9502accessory198
CT1065 suits buyers choosing WEN’s 10A corded, 6-1/2-inch saw with a separately purchased CT9502 track. That track comprises two 50-inch sections with joining adapters. The saw includes a 24-tooth blade and scoring, full-plunge and blade-change modes.CT1065 instruction manual · turn1825view0 PDFpage3 Specs52-66 safety191-193
CT1065 suits buyers choosing WEN’s 10A corded, 6-1/2-inch saw with a separately purchased CT9502 track. That track comprises two 50-inch sections with joining adapters. The saw includes a 24-tooth blade and scoring, full-plunge and blade-change modes.Checked October 3, 2026
- WEN CT1065: The manual gives on-track depths of 2.13 inches square and 1.50 inches at 45°, versus 2.32 and 1.65 inches without the track. Bevel travel is 0° to 45°. These are the manual’s capacities, not a measured cut-quality result.
Exact US model and stated package. Square is 0° bevel, blade perpendicular to base. On-rail and free-base depths differ; no unlabelled capacity is presumed on-rail. Follow exact saw, blade, rail and material instructions. No universal rail or cross-brand battery compatibility, measured cutting accuracy, splinter-free finish, runtime, dust capture or safety outcome is asserted.
CT1065 10-amp plunge track saw · turn1824view0 ProductDescription165-173 and CT9502accessory198
The manual gives on-track depths of 2.13 inches square and 1.50 inches at 45°, versus 2.32 and 1.65 inches without the track. Bevel travel is 0° to 45°. These are the manual’s capacities, not a measured cut-quality result.CT1065 instruction manual · turn1825view0 PDFpage3 Specs52-66 safety191-193
The manual gives on-track depths of 2.13 inches square and 1.50 inches at 45°, versus 2.32 and 1.65 inches without the track. Bevel travel is 0° to 45°. These are the manual’s capacities, not a measured cut-quality result.Checked October 3, 2026
- WEN CT1065: A rear dust port connects to extraction equipment. Replacement-blade fit needs confirmation: the product page and manual specification table list a 20mm arbor, while a manual safety paragraph says 22mm. Resolve that conflict with WEN before buying replacement blades. Rails, clamps and the hose are separate.
Exact US model and stated package. Square is 0° bevel, blade perpendicular to base. On-rail and free-base depths differ; no unlabelled capacity is presumed on-rail. Follow exact saw, blade, rail and material instructions. No universal rail or cross-brand battery compatibility, measured cutting accuracy, splinter-free finish, runtime, dust capture or safety outcome is asserted.
CT1065 10-amp plunge track saw · turn1824view0 ProductDescription165-173 and CT9502accessory198
A rear dust port connects to extraction equipment. Replacement-blade fit needs confirmation: the product page and manual specification table list a 20mm arbor, while a manual safety paragraph says 22mm. Resolve that conflict with WEN before buying replacement blades. Rails, clamps and the hose are separate.CT1065 instruction manual · turn1825view0 PDFpage3 Specs52-66 safety191-193
A rear dust port connects to extraction equipment. Replacement-blade fit needs confirmation: the product page and manual specification table list a 20mm arbor, while a manual safety paragraph says 22mm. Resolve that conflict with WEN before buying replacement blades. Rails, clamps and the hose are separate.Checked October 3, 2026