10 XLR cables for DJ setups and gigs

Our top 10, at a glance.

Match the connector type, cable construction, and run length to the XLR audio connections in your DJ setup.

#1Hosa Pro HMICFor a general DJ cable kit
#2Hosa Edge CMKFor Neutrik connectors
#3D’Addario American Stage XLRFor crimped Neutrik connections
#4Hosa MSC SwitchcraftFor Switchcraft connectors
#5D’Addario Custom Series Swivel XLRFor a swivel connector layout
#6Pig Hog Tour Grade PHM10For an 8 mm jacket
#7Hosa Quad CMIFor a four-conductor cable
#8Hosa MCL Microphone CableFor a conventional braided cable
#9D’Addario Classic Series XLRFor nickel-plated connectors
#10Hosa Economy MBLFor a simple short-run option

All 10 picks, in order.

#1
For a general DJ cable kit
Hosa Pro HMIC
DJs matching a range of runs with REAN connectors and a braided cable.
Why it fits
- REAN XLR3F to XLR3M. [1]
- Two 20 AWG OFC conductors; 90% OFC braided shield. [2]
Before you choose
- Choose the XLR3F-to-XLR3M configuration and match both ends to your equipment. [1]
Check before buying:
- Measure the complete cable route and confirm the selected length and connector type before ordering.
- Check the input and output requirements in your equipment manuals.
Model: HMIC-000 · XLR-to-XLR US line; select required length · US
Check current details at Hosa ↗
#2
For Neutrik connectors
Hosa Edge CMK
DJs who want Neutrik connectors with a wide selection of cable lengths.
Why it fits
- Neutrik XLR3F to XLR3M. [4]
- Two 20 AWG OFC conductors; 95% OFC braided shield. [5]
Before you choose
- This is an XLR-to-XLR cable; a setup with different sockets needs a different connector configuration. [4]
Check before buying:
- Measure the complete cable route and confirm the selected length and connector type before ordering.
- Check the input and output requirements in your equipment manuals.
Model: CMK-000AU · XLR-to-XLR US line; select required length · US
Check current details at Hosa ↗
#3
For crimped Neutrik connections
D’Addario American Stage XLR
DJs choosing the American Stage connector construction for a 5–25 ft run.
Why it fits
- XLR to XLR with Neutrik plugs and crimped connections. [7]
- 22 AWG OFC twisted-pair conductors with copper braid shielding. [8]
Before you choose
- Its listed XLR lengths stop at 25 ft; measure the full route before choosing this series. [9]
Check before buying:
- Measure the complete cable route and confirm the selected length and connector type before ordering.
- Check the input and output requirements in your equipment manuals.
Model: PW-AMSM-10 · 10 ft XLR-to-XLR model · US
Check current details at D’Addario ↗
#4
For Switchcraft connectors
Hosa MSC Switchcraft
DJs standardizing their kit around Switchcraft XLR connections.
Why it fits
- Switchcraft XLR3F to XLR3M. [10]
- Two 20 AWG OFC conductors; 95% OFC braided shield. [11]
Before you choose
- The MSC uses Switchcraft connectors; it is a different connector line from Hosa Edge or Pro. [10] [4] [1]
Check before buying:
- Measure the complete cable route and confirm the selected length and connector type before ordering.
- Check the input and output requirements in your equipment manuals.
Model: MSC-000 · XLR-to-XLR US line; select required length · US
Check current details at Hosa ↗
#5
For a swivel connector layout
D’Addario Custom Series Swivel XLR
DJs checking whether a swivel connection fits the space around their equipment.
Why it fits
- XLR to XLR with swivel connectors; gold-plated plugs. [13]
- 24 AWG OFC conductors with two layers of shielding and molded strain relief. [14]
Before you choose
- Select the swivel XLR-to-XLR model and check the connector clearance at your equipment. [13]
Check before buying:
- Measure the complete cable route and confirm the selected length and connector type before ordering.
- Check the input and output requirements in your equipment manuals.
Model: PW-MS-10 · 10 ft XLR-to-XLR swivel model · US
Check current details at D’Addario ↗
#6
For an 8 mm jacket
Pig Hog Tour Grade PHM10
DJs who prefer a cable with an explicitly specified outer diameter.
Why it fits
- XLR connectors protected with heat shrink. [16]
- 8 mm PVC outer covering. [17]
Before you choose
- The 8 mm outer covering needs room in your cable bag and around the equipment. [17]
Check before buying:
- Measure the complete cable route and confirm the selected length and connector type before ordering.
- Check the input and output requirements in your equipment manuals.
Model: PHM10 · 10 ft XLR-to-XLR model · US
Check current details at Pig Hog ↗
#7
For a four-conductor cable
Hosa Quad CMI
DJs specifically choosing a quad cable design in a 10 or 25 ft length.
Why it fits
- Hosa XLR3F to XLR3M. [19]
- Four 24 AWG OFC conductors; 90% OFC braided shield. [20]
Before you choose
- The two listed lengths are 10 and 25 ft, which narrows the choice for short patches or longer routes. [21]
Check before buying:
- Measure the complete cable route and confirm the selected length and connector type before ordering.
- Check the input and output requirements in your equipment manuals.
Model: CMI-100 · XLR-to-XLR US line; select required length · US
Check current details at Hosa ↗
#8
For a conventional braided cable
Hosa MCL Microphone Cable
DJs who want Hosa connectors and multiple listed run lengths.
Why it fits
- Hosa XLR3F to XLR3M with internal strain relief. [22]
- Two 22 AWG OFC conductors; 88% OFC braided shield. [23]
Before you choose
- Confirm the XLR3F-to-XLR3M configuration before ordering. [22]
Check before buying:
- Measure the complete cable route and confirm the selected length and connector type before ordering.
- Check the input and output requirements in your equipment manuals.
Model: MCL-100 · XLR-to-XLR US line; select required length · US
Check current details at Hosa ↗
#9
For nickel-plated connectors
D’Addario Classic Series XLR
DJs who want the Classic Series connector and strain-relief design.
Why it fits
- XLR to XLR with nickel-plated brass connectors. [25]
- OFC conductors with spiral shielding and chuck-style strain relief. [26]
Before you choose
- The cable uses spiral shielding, so it differs in construction from the braided options in this guide. [26] [2]
Check before buying:
- Measure the complete cable route and confirm the selected length and connector type before ordering.
- Check the input and output requirements in your equipment manuals.
Model: PW-CMIC-10 · 10 ft XLR-to-XLR model · US
Check current details at D’Addario ↗
#10
For a simple short-run option
Hosa Economy MBL
DJs needing a Hosa XLR cable in one of three common short-run lengths.
Why it fits
- Hosa XLR3F to XLR3M with internal strain relief. [28]
- Two 24 AWG OFC conductors; 76% OFC spiral shield. [29]
Before you choose
- The specification table lists a spiral shield; choose another construction if your kit calls for braid. [29]
Check before buying:
- Measure the complete cable route and confirm the selected length and connector type before ordering.
- Check the input and output requirements in your equipment manuals.
Model: MBL-100 · XLR-to-XLR US line; select required length · US
Check current details at Hosa ↗

The details, side by side.

Published specifications and features
What matters	#1Hosa Pro HMIC	#2Hosa Edge CMK	#3D’Addario American Stage XLR	#4Hosa MSC Switchcraft	#5D’Addario Custom Series Swivel XLR	#6Pig Hog Tour Grade PHM10	#7Hosa Quad CMI	#8Hosa MCL Microphone Cable	#9D’Addario Classic Series XLR	#10Hosa Economy MBL
Connector	REAN XLR3F to XLR3M. [1]	Neutrik XLR3F to XLR3M. [4]	XLR to XLR with Neutrik plugs and crimped connections. [7]	Switchcraft XLR3F to XLR3M. [10]	XLR to XLR with swivel connectors; gold-plated plugs. [13]	XLR connectors protected with heat shrink. [16]	Hosa XLR3F to XLR3M. [19]	Hosa XLR3F to XLR3M with internal strain relief. [22]	XLR to XLR with nickel-plated brass connectors. [25]	Hosa XLR3F to XLR3M with internal strain relief. [28]
Construction	Two 20 AWG OFC conductors; 90% OFC braided shield. [2]	Two 20 AWG OFC conductors; 95% OFC braided shield. [5]	22 AWG OFC twisted-pair conductors with copper braid shielding. [8]	Two 20 AWG OFC conductors; 95% OFC braided shield. [11]	24 AWG OFC conductors with two layers of shielding and molded strain relief. [14]	8 mm PVC outer covering. [17]	Four 24 AWG OFC conductors; 90% OFC braided shield. [20]	Two 22 AWG OFC conductors; 88% OFC braided shield. [23]	OFC conductors with spiral shielding and chuck-style strain relief. [26]	Two 24 AWG OFC conductors; 76% OFC spiral shield. [29]
Length options	3, 5, 10, 15, 20, 25, 30, 50 and 100 ft in the series selector. [3]	3, 5, 10, 15, 20, 25, 30, 50, 75 and 100 ft. [6]	5, 10 and 25 ft; 10 ft model shown. [9]	3, 5, 10, 15, 20, 25, 30, 50, 75 and 100 ft. [12]	5, 10 and 25 ft in the selector; 10 ft swivel model shown. [15]	10 ft for the PHM10 model compared here. [18]	10 and 25 ft. [21]	3, 5, 10, 15, 20, 25, 30, 50 and 100 ft in the series selector. [24]	10, 25 and 50 ft XLR-to-XLR options; 10 ft model shown. [27]	5, 10 and 25 ft. [30]

Start with the connectors

These picks use XLR-to-XLR connections. Match both ends to your equipment before choosing a length. [1] [22] [13]

Plan the cable route

Length choices vary by cable line. Compare the full route with the listed options, including the space needed around stands and your DJ table. [6] [21] [18]

How we compared.

Sources: official manufacturer product pages and specifications, reviewed September 9, 2026. The order prioritizes connector options and a broad choice of runs, followed by specialized swivel, jacket, quad, and simpler cable designs. Each pick is a distinct cable line; different lengths and packs do not count as additional picks.

How we choose